Date: Tue, 29 Dec 1998 10:36:25 -0400 (AST) From: The Hermit Hacker <scrappy@hub.org> To: freebsd-current@FreeBSD.ORG Subject: Older 3.0-CURRENT just ... hangs? Message-ID: <Pine.BSF.4.05.9812291035580.29080-100000@thelab.hub.org>
next in thread | raw e-mail | index | archive | help
Morning...
This is starting to get annoying...every 15-20hrs, my server just
*hangs*...no errors on the serial console, nothing...
My experiences with SCSI bus hangs are generally that you can
still ping the machine...this isn't the case.
I'm running a 3.0-CURRENT as of a few days past -RELEASE, and am
in the process of acquiring a new drive to use to upgrade to the newer
-CURRENT and then swap in the drive, but that won't happen for another two
weeks or so...
I'm at a total loss for ideas on where to look...if anyone can
point me in the right direction, maybe?
A dmesg of the current system follows, in case maybe its something
hardware related that will stand out for someone?
Marc G. Fournier
Systems Administrator @ hub.org
primary: scrappy@hub.org secondary: scrappy@{freebsd|postgresql}.org
===================================================
Copyright (c) 1992-1998 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.0-CURRENT #0: Tue Dec 22 08:09:26 EST 1998
root@hub.org:/usr/src/sys/compile/hub_org
Timecounter "i8254" frequency 1193182 Hz cost 3362 ns
Timecounter "TSC" frequency 267273751 Hz cost 180 ns
CPU: Pentium II (267.27-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x633 Stepping=3
Features=0x80f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,MMX>
real memory = 268435456 (262144K bytes)
avail memory = 258572288 (252512K bytes)
Probing for devices on PCI bus 0:
chip0: <Intel 82443BX host to PCI bridge> rev 0x02 on pci0.0.0
chip1: <Intel 82443BX host to AGP bridge> rev 0x02 on pci0.1.0
chip2: <Intel 82371AB PCI to ISA bridge> rev 0x02 on pci0.4.0
chip3: <Intel 82371AB USB host controller> rev 0x01 int d irq 12 on pci0.4.2
chip4: <Intel 82371AB Power management controller> rev 0x02 on pci0.4.3
ahc0: <Adaptec 2940 Ultra SCSI adapter> rev 0x01 int a irq 12 on pci0.9.0
ahc0: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs
ahc1: <Adaptec 2940 Ultra SCSI adapter> rev 0x01 int a irq 10 on pci0.10.0
ahc1: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs
xl0: <3Com 3c905 Fast Etherlink XL 10/100BaseTX> rev 0x00 int a irq 11 on pci0.12.0
xl0: Ethernet address: 00:60:97:d0:3c:f5
xl0: autoneg complete, link status good (full-duplex, 100Mbps)
Probing for devices on PCI bus 1:
Probing for PnP devices:
Probing for devices on the ISA bus:
sc0 not found at 0x60
ed0 at 0x280-0x29f irq 5 maddr 0xd8000 msize 8192 on isa
ed0: address 00:00:c0:f0:41:c2, type SMC8416C/SMC8416BT (16 bit)
lpt0 not found
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A, console
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
npx0 on motherboard
npx0: INT 16 interface
IP packet filtering initialized, divert enabled, rule-based forwarding disabled, default to accept, logging limited to 100 packets/entry
ccd0-3: Concatenated disk drivers
Waiting 2 seconds for SCSI devices to settle
Sending WDTR!
(probe1:ahc0:0:1:0): Sending SDTR!!
Sending WDTR!
(probe4:ahc0:0:4:0): Sending SDTR!!
da3 at ahc0 bus 0 target 5 lun 0
da3: <QUANTUM XP34550W LYK8> Fixed Direct Access SCSI2 device
da3: 40.0MB/s transfers (20.0MHz, offset 8, 16bit), Tagged Queueing Enabled
da3: 4341MB (8890760 512 byte sectors: 255H 63S/T 553C)
da2 at ahc0 bus 0 target 4 lun 0
da2: <COMPAQ DGHS09Y 01C0> Fixed Direct Access SCSI3 device
da2: 40.0MB/s transfers (20.0MHz, offset 8, 16bit), Tagged Queueing Enabled
da2: 8678MB (17773500 512 byte sectors: 255H 63S/T 1106C)
da9 at ahc1 bus 0 target 5 lun 0
da9: <Quantum XP34300 L912> Fixed Direct Access SCSI2 device
da9: 5.0MB/s transfers (5.0MHz, offset 15), Tagged Queueing Enabled
da9: 4101MB (8399520 512 byte sectors: 255H 63S/T 522C)
da4 at ahc0 bus 0 target 6 lun 0
da4: <QUANTUM XP34550W LYK8> Fixed Direct Access SCSI2 device
da4: 40.0MB/s transfers (20.0MHz, offset 8, 16bit), Tagged Queueing Enabled
da4: 4341MB (8890760 512 byte sectors: 255H 63S/T 553C)
da6 at ahc1 bus 0 target 1 lun 0
da6: <QUANTUM XP34301 1071> Fixed Direct Access SCSI2 device
da6: 5.0MB/s transfers (5.0MHz, offset 15), Tagged Queueing Enabled
da6: 4106MB (8410200 512 byte sectors: 255H 63S/T 523C)
da1 at ahc0 bus 0 target 1 lun 0
da1: <COMPAQ DGHS18Y 01A0> Fixed Direct Access SCSI3 device
da1: 40.0MB/s transfers (20.0MHz, offset 8, 16bit), Tagged Queueing Enabled
da1: 17366MB (35566000 512 byte sectors: 255H 63S/T 2213C)
da0 at ahc0 bus 0 target 0 lun 0
da0: <QUANTUM VIKING II 4.5WSE 3506> Fixed Direct Access SCSI2 device
da0: 40.0MB/s transfers (20.0MHz, offset 8, 16bit), Tagged Queueing Enabled
da0: 4350MB (8910423 512 byte sectors: 255H 63S/T 554C)
da5 at ahc0 bus 0 target 8 lun 0
da5: <SEAGATE ST39102LW 0004> Fixed Direct Access SCSI2 device
da5: 40.0MB/s transfers (20.0MHz, offset 8, 16bit), Tagged Queueing Enabled
da5: 8683MB (17783240 512 byte sectors: 255H 63S/T 1106C)
da8 at ahc1 bus 0 target 4 lun 0
da8: <QUANTUM XP34301 1071> Fixed Direct Access SCSI2 device
da8: 5.0MB/s transfers (5.0MHz, offset 15), Tagged Queueing Enabled
da8: 4106MB (8410200 512 byte sectors: 255H 63S/T 523C)
da7 at ahc1 bus 0 target 2 lun 0
da7: <QUANTUM XP34301 1071> Fixed Direct Access SCSI2 device
da7: 5.0MB/s transfers (5.0MHz, offset 15), Tagged Queueing Enabled
da7: 4106MB (8410200 512 byte sectors: 255H 63S/T 523C)
changing root device to da0s1a
WARNING: / was not properly dismounted
rtinit: wrong ifa (0xf1191100) was (0xf1157200)
xl0: promiscuous mode enabled
ed0: promiscuous mode enabled
pid 772 (nmbd), uid 0: exited on signal 11 (core dumped)
(da0:ahc0:0:0:0): tagged openings now 63
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.05.9812291035580.29080-100000>