Date: Wed, 24 Mar 2004 05:22:03 -0800 (PST) From: Jianqin Qu <jqu@its.brooklyn.cuny.edu> To: freebsd-gnats-submit@FreeBSD.org Subject: i386/64656: Bugs with Ethernet driver "bfe" Message-ID: <200403241322.i2ODM3uv054002@www.freebsd.org> Resent-Message-ID: <200403241330.i2ODUMHx087833@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 64656
>Category: i386
>Synopsis: Bugs with Ethernet driver "bfe"
>Confidential: no
>Severity: serious
>Priority: medium
>Responsible: freebsd-i386
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Wed Mar 24 05:30:21 PST 2004
>Closed-Date:
>Last-Modified:
>Originator: Jianqin Qu
>Release: 5.2.1
>Organization:
>Environment:
FreeBSD faculty51 5.2.1-RELEASE FreeBSD 5.2.1-RELEASE #0: Mon Feb 23 20:45:55 GMT 2004 root@wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC i386
>Description:
Below is the ouput from "dmesg", whose bottom lines state the bug in bfe drivers in a very clear way by itself.
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RELEASE #0: Mon Feb 23 20:45:55 GMT 2004
root@wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a35000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a35244.
ACPI APIC Table: <DELL 160L >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (2392.29-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf27 Stepping = 7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
real memory = 259473408 (247 MB)
avail memory = 242401280 (231 MB)
ioapic0: Changing APIC ID to 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <DELL 160L > on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 7 entries at 0xc00feae0
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
device_probe_and_attach: acpi_cpu1 attach returned 6
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82845G (845G GMCH) SVGA controller> mem 0xfeb80000-0xfebfffff,0xe8000000-0xefffffff irq 16 at device 2.0 on pci0
agp0: detected 8060k stolen memory
agp0: aperture size is 128M
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xff80-0xff9f irq 16 at device 29.0 on pci0
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xff60-0xff7f irq 19 at device 29.1 on pci0
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xff40-0xff5f irq 18 at device 29.2 on pci0
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib1
bfe0: <Broadcom BCM4401 Fast Ethernet> mem 0xfe9fe000-0xfe9fffff irq 17 at device 9.0 on pci1
bfe0: Ethernet address: 00:0b:db:b6:6f:5e
miibus0: <MII bus> on bfe0
bmtphy0: <BCM4401 10/100baseTX PHY> on miibus0
bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port 0xffa0-0xffaf,0xed8c-0xed8f,0xed98-0xed9f,0xed88-0xed8b,0xed90-0xed97 mem 0xfeb7fc00-0xfeb7ffff irq 18 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pci0: <multimedia, audio> at device 31.5 (no driver attached)
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
ppc0 port 0x778-0x77f,0x378-0x37f irq 7 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
acpi_cpu1: <CPU> on acpi0
device_probe_and_attach: acpi_cpu1 attach returned 6
orm0: <Option ROMs> at iomem 0xcd000-0xcffff,0xcb800-0xccfff,0xc0000-0xcb7ff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 2392290076 Hz quality 800
Timecounters tick every 10.000 msec
GEOM: create disk ad0 dp=0xc2d0de60
ad0: 76293MB <ST380011A> [155009/16/63] at ata0-master UDMA100
acd0: CDROM <GCR-8481B> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s4a
bfe0: BUG! Timeout waiting for bit 80000000 of register 428 to clear.
bfe0: BUG! Timeout waiting for bit 80000000 of register 428 to clear.
bfe0: BUG! Timeout waiting for bit 80000000 of register 428 to clear.
bfe0: BUG! Timeout waiting for bit 80000000 of register 428 to clear.
bfe0: BUG! Timeout waiting for bit 80000000 of register 428 to clear.
bfe0: BUG! Timeout waiting for bit 80000000 of register 428 to clear.
bfe0: BUG! Timeout waiting for bit 80000000 of register 428 to clear.
bfe0: BUG! Timeout waiting for bit 80000000 of register 428 to clear.
bfe0: BUG! Timeout waiting for bit 80000000 of register 428 to clear.
bfe0: BUG! Timeout waiting for bit 80000000 of register 428 to clear.
bfe0: BUG! Timeout waiting for bit 80000000 of register 428 to clear.
bfe0: BUG! Timeout waiting for bit 80000000 of register 428 to clear.
bfe0: BUG! Timeout waiting for bit 80000000 of register 428 to clear.
bfe0: BUG! Timeout waiting for bit 80000000 of register 428 to clear.
bfe0: BUG! Timeout waiting for bit 80000000 of register 428 to clear.
bfe0: BUG! Timeout waiting for bit 80000000 of register 428 to clear.
bfe0: BUG! Timeout waiting for bit 80000000 of register 428 to clear.
bfe0: BUG! Timeout waiting for bit 80000000 of register 428 to clear.
bfe0: BUG! Timeout waiting for bit 80000000 of register 428 to clear.
bfe0: BUG! Timeout waiting for bit 80000000 of register 428 to clear.
bfe0: BUG! Timeout waiting for bit 80000000 of register 428 to clear.
>How-To-Repeat:
Install FreeBSD 5.2.1 (i386) to any machine with a Broadcom 4401 Ethernet card and the problem arises when you boot FreeBSD
>Fix:
Bug-fix with "bfe" driver
>Release-Note:
>Audit-Trail:
>Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200403241322.i2ODM3uv054002>