Date: Tue, 24 Sep 2002 14:05:08 -0500 (CDT) From: Mike Silbersack <silby@silby.com> To: David Wolfskill <david@catwhisker.org> Cc: Alexander Kabaev <ak03@gte.com>, <current@freebsd.org> Subject: Re: -mcpu=pentiumpro still evil? Message-ID: <20020924140119.J36172-200000@patrocles.silby.com> In-Reply-To: <200209241619.g8OGJkme065520@bunrab.catwhisker.org>
index | next in thread | previous in thread | raw e-mail
[-- Attachment #1 --] On Tue, 24 Sep 2002, David Wolfskill wrote: > >building static cc_int library > >sort: open failed: +1: No such file or directory > >sort: open failed: +1: No such file or directory > >ranlib libcc_int.a > > >Any chance that's causing a problem? > > To fix that (regardless of sort), s/sort +1/sort -k 2/ in `which lorder` > (and /usr/src/usr.bin/lorder/lorder.sh). > > Cheers, > david (links to my resume at http://www.catwhisker.org/~david) > -- > David H. Wolfskill david@catwhisker.org Ok, I fixed lorder.sh, and made gcc again from clean with Alexander's patch. No change, I still see the same segmentation fault. Alexander, how can I easily build gcc with full debugging symbols? That might make the backtrace more useful for you. Or better yet, I'm just including my kernel config. Presumably with it you'll be able to recreate the problem on your system. If not, then we can see what else differs about my system. Mike "Silby" Silbersack [-- Attachment #2 --] # # GENERIC -- Generic kernel configuration file for FreeBSD/i386 # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the NOTES configuration file. If you are # in doubt as to the purpose or necessity of a line, check first in NOTES. # # $FreeBSD: src/sys/i386/conf/GENERIC,v 1.308 2001/05/13 20:52:39 phk Exp $ machine i386 cpu I486_CPU cpu I586_CPU cpu I686_CPU ident PATROCLES maxusers 0 #options RANDOM_IP_ID options UFS_DIRHASH options DIAGNOSTIC #makeoptions NO_WERROR=true device smbus # Bus support, required for smb below. device intpm device alpm device ichsmb device smb device iicbus # Bus support, required for ic/iic/iicsmb below. device iicbb device ic device iic device iicsmb # smb over i2c bridge #device pcf #To statically compile in device wiring instead of /boot/device.hints #hints "GENERIC.hints" #Default places to look for devices. makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols options DDB #options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options INET6 #IPv6 communications protocols options FFS #Berkeley Fast Filesystem options SOFTUPDATES #Enable FFS soft updates support options MD_ROOT #MD is a potential root device #options NFS #Network Filesystem #options NFS_ROOT #NFS usable as root device, NFS required options MSDOSFS #MSDOS Filesystem options CD9660 #ISO 9660 Filesystem options PROCFS #Process filesystem options PSEUDOFS options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI options KTRACE #ktrace(1) support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores options P1003_1B #Posix P1003_1B real-time extensions options _KPOSIX_PRIORITY_SCHEDULING options KBD_INSTALL_CDEV # install a CDEV entry in /dev # Debugging for use in -current #options DDB #options INVARIANTS #options INVARIANT_SUPPORT #options WITNESS # To make an SMP kernel, the next two are needed #options SMP # Symmetric MultiProcessor Kernel #options APIC_IO # Symmetric (APIC) I/O device isa device eisa device pci # Floppy drives device fdc # ATA and ATAPI devices device ata device atadisk # ATA disk drives device atapicd # ATAPI CDROM drives device atapifd # ATAPI floppy drives device atapist # ATAPI tape drives options ATA_STATIC_ID #Static device numbering # SCSI Controllers device ahb # EISA AHA1742 family device ahc # AHA2940 and onboard AIC7xxx devices device amd # AMD 53C974 (Tekram DC-390(T)) device isp # Qlogic family #device ncr # NCR/Symbios Logic device sym # NCR/Symbios Logic (newer chipsets + those of `ncr') device adv # Advansys SCSI adapters device adw # Advansys wide SCSI adapters device aha # Adaptec 154x SCSI adapters device aic # Adaptec 15[012]x SCSI adapters, AIC-6[23]60. device bt # Buslogic/Mylex MultiMaster SCSI adapters device ncv # NCR 53C500 device nsp # Workbit Ninja SCSI-3 device stg # TMC 18C30/18C50 # RAID controllers interfaced to the SCSI subsystem #device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID device dpt # DPT Smartcache III, IV - See NOTES for options! device mly # Mylex AcceleRAID/eXtremeRAID # SCSI peripherals device scbus # SCSI bus (required) device da # Direct Access (disks) device sa # Sequential Access (tape etc) device cd # CD device pass # Passthrough device (direct SCSI access) # RAID controllers device aac # Adaptec FSA RAID device amr # AMI MegaRAID device ida # Compaq Smart RAID device mlx # Mylex DAC960 family device twe # 3ware ATA RAID # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc # At keyboard controller device atkbd # at keyboard device psm # psm mouse device vga # VGA screen # splash screen/screen saver device splash # syscons is the default console driver, resembling an SCO console device sc # Enable this for the pcvt (VT220 compatible) console driver #device vt #options XSERVER # support for X server on a vt console #options FAT_CURSOR # start with block cursor # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines #options PCVT_SCANSET=2 # IBM keyboards are non-std # Floating point support - do not disable. device npx # Power management support (see NOTES for more options) device apm # Add suspend/resume support for the i8254. device pmtimer # Audio support device pcm # PCCARD (PCMCIA) support device card 1 # pccard bus device pcic # PCMCIA bridge # Serial (COM) ports device sio # 8250, 16[45]50 based serial ports # Parallel port device ppc device ppbus # Parallel port bus (required) device lpt # Printer device plip # TCP/IP over parallel device ppi # Parallel port interface device #device vpo # Requires scbus and da # PCI Ethernet NICs. device de # DEC/Intel DC21x4x (``Tulip'') device vx # 3Com 3c590, 3c595 (``Vortex'') #device wx # Intel Gigabit Ethernet Card (``Wiseman'') device gx # Intel Gigabit ethernet # PCI Ethernet NICs that use the common MII bus controller code. # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! device miibus # MII bus support device dc # DEC/Intel 21143 and various workalikes device fxp # Intel EtherExpress PRO/100B (82557, 82558) device pcn # AMD Am79C79x PCI 10/100 NICs device rl # RealTek 8129/8139 device sf # Adaptec AIC-6915 (``Starfire'') device sis # Silicon Integrated Systems SiS 900/SiS 7016 device ste # Sundance ST201 (D-Link DFE-550TX) device tl # Texas Instruments ThunderLAN device tx # SMC EtherPower II (83c170 ``EPIC'') device vr # VIA Rhine, Rhine II device wb # Winbond W89C840F device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') # ISA Ethernet NICs. pccard nics included. device cs # Crystal Semiconductor CS89x0 NIC # 'device ed' requires 'device miibus' device ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards device ex # Intel EtherExpress Pro/10 and Pro/10+ device ep # Etherlink III based cards device fe # Fujitsu MB8696x based cards device sn # SMC's 9000 series of ethernet chips device xe # Xircom pccard ethernet # The probe order of these is presently determined by i386/isa/isa_compat.c. #device ie #device le device lnc # Wireless NIC cards device an # Aironet 4500/4800 802.11 wireless NICs. device awi # BayStack 660 and others #device wi # WaveLAN/IEEE 802.11 wireless NICs. #device wl # Older non 802.11 Wavelan wireless NIC. # Pseudo devices - the number indicates how many units to allocate. device random # Entropy device device loop # Network loopback device ether # Ethernet support device sl # Kernel SLIP device ppp # Kernel PPP device tun # Packet tunnel. device pty # Pseudo-ttys (telnet etc) device md # Memory "disks" device gif # IPv6 and IPv4 tunneling device faith # IPv6-to-IPv4 relaying (translation) # The `bpf' device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! device bpf # Berkeley packet filter # USB support device uhci # UHCI PCI->USB interface device ohci # OHCI PCI->USB interface device usb # USB Bus (required) #device udbp # USB Double Bulk Pipe devices device ugen # Generic device uhid # "Human Interface Devices" device ukbd # Keyboard device ulpt # Printer device umass # Disks/Mass storage - Requires scbus and da device ums # Mouse device urio # Diamond Rio 500 MP3 player device uscanner # Scanners # USB Ethernet, requires mii device aue # ADMtek USB ethernet device cue # CATC USB ethernet device kue # Kawasaki LSI USB ethernethelp
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020924140119.J36172-200000>