Date: Thu, 4 Mar 1999 12:28:31 +0000 (GMT) From: Brian Feldman <green@zone.syracuse.net> To: Julian Elischer <julian@whistle.com> Cc: current@FreeBSD.ORG Subject: Re: ATA not quite peachy Message-ID: <Pine.BSF.4.05.9903041228060.29395-100000@zone.syracuse.net> In-Reply-To: <Pine.BSF.4.05.9903032327230.310-100000@s204m82.isp.whistle.com>
next in thread | previous in thread | raw e-mail | index | archive | help
SoftUpdates on my LS-120? I'm not a masochist!! Brian Feldman _ __ ___ ___ ___ green@unixhelp.org _ __ ___ | _ ) __| \ http://www.freebsd.org/ _ __ ___ ____ | _ \__ \ |) | FreeBSD: The Power to Serve! _ __ ___ ____ _____ |___/___/___/ On Wed, 3 Mar 1999, Julian Elischer wrote: > Oi! If you have softupdates on the LS120 drive, be aware that soft updates > has been known to have odd behaviour with some drive types (e.g. IDE > drives in 1-(non-multiblock) block mode, and floppy drives. I wouldn't be > surprised if LS120 drives had the capacity to confuse softupdates.. > > julian > > > On Thu, 4 Mar 1999, Brian Feldman wrote: > > > After testing out the new ATA drivers, I've only got a single problem. My > > box locked up while accessing the LS-120 (and, seemingly, swapping): > > > > Mar 4 00:20:02 green /kernel: atapi_transfer: bad command phase > > Mar 4 00:20:33 green /kernel: swap_pager: indefinite wait buffer: device: > > 0x20019, blkno: 2800, size: 8192 > > > > I think what was going on was a second read transfer was trying to occur > > while one was already going, and something wrong happened with the code or > > bus, with the drive light staying on, so the swapper timed out trying to > > access the hdd. > > > > Hope someone can help with this; for now I'm using the old wd/wfd/acd. > > > > The current system: > > Copyright (c) 1992-1999 FreeBSD Inc. > > Copyright (c) 1982, 1986, 1989, 1991, 1993 > > The Regents of the University of California. All rights reserved. > > FreeBSD 4.0-CURRENT #65: Wed Mar 3 19:31:00 EST 1999 > > green@green.dyn.ez-ip.net:/usr/src/sys/compile/FELDMAN > > Timecounter "i8254" frequency 1193182 Hz > > CPU: AMD-K6(tm) 3D processor (300.68-MHz 586-class CPU) > > Origin = "AuthenticAMD" Id = 0x58c Stepping=12 > > Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX> > > real memory = 67108864 (65536K bytes) > > avail memory = 62337024 (60876K bytes) > > Bad DMI table checksum! > > Preloaded elf kernel "kernel" at 0xf02b2000. > > Probing for devices on PCI bus 0: > > chip0: <AcerLabs M1541 (Aladdin-V) PCI host bridge> rev 0x04 on pci0.0.0 > > chip1: <AcerLabs M5243 PCI-PCI bridge> rev 0x04 on pci0.1.0 > > ohci0: <AcerLabs M5237 (Aladdin-V) USB Host Controller> rev 0x03 int a irq > > 10 on > > pci0.2.0 > > usb0: OHCI version 1.0, legacy support > > alpm0: <AcerLabs M15x3 Power Management Unit> rev 0x00 on pci0.3.0 > > chip2: <AcerLabs M1533 portable PCI-I-ISA bridge> rev 0xb4 on pci0.7.0 > > ata-pci0: <Acer Aladdin IV/V IDE controller> rev 0x20 int a irq 0 on > > pci0.15.0 > > ata0 at 0x01f0 irq 14 on ata-pci0 > > ata1 at 0x0170 irq 15 on ata-pci0 > > vga0: <S3 ViRGE DX/GX graphics accelerator> rev 0x01 int a irq 0 on > > pci0.18.0 > > Probing for devices on PCI bus 1: > > Probing for PnP devices: > > Probing for devices on the ISA bus: > > sc0 on isa > > sc0: VGA color <16 virtual consoles, flags=0x0> > > atkbdc0 at 0x60-0x6f on motherboard > > atkbd0 irq 1 on isa > > psm0 irq 12 on isa > > psm0: model Generic PS/2 mouse, device ID 0 > > sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa > > sio0: type 16550A > > sio1 at 0x2f8-0x2ff irq 3 on isa > > sio1: type 16550A > > ppc0 at 0x378 irq 7 drq 3 on isa > > ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode > > ppc0: FIFO with 16/16/1 bytes threshold > > plip0: <PLIP network interface> on ppbus 0 > > lpt0: <generic printer> on ppbus 0 > > lpt0: Interrupt-driven port > > ppi0: <generic parallel i/o> on ppbus 0 > > lppps0: <Pulse per second Timing Interface> on ppbus 0 > > fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa > > sb0 at 0x220 irq 5 drq 1 on isa > > snd0: <SoundBlaster 16 4.13> > > sbxvi0 at drq 6 on isa > > snd0: <SoundBlaster 16 4.13> > > sbmidi0 at 0x330 on isa > > snd0: <SoundBlaster MPU-401> > > opl0 at 0x388 on isa > > snd0: <Yamaha OPL3 FM> > > joy0 at 0x201 on isa > > joy0: joystick > > vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa > > npx0 on motherboard > > npx0: INT 16 interface > > apm0 on isa > > apm: found APM BIOS version 1.2 > > usb0: <AcerLabs M5237 (Aladdin-V) USB Host Controller> > > uhub0 at usb0 > > uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > > uhub0: 2 ports with 2 removable, self powered > > alsmb0: <Aladdin IV/V/Pro2 SMBus controller> > > smbus0: <System Management Bus> on alsmb0 > > smb0: <SMBus general purpose I/O> on smbus0 > > IP packet filtering initialized, divert enabled, rule-based forwarding > > enabled, > > default to accept, logging disabled > > DUMMYNET initialized (980901) -- size dn_pkt 48 > > ad0: <Maxtor 71626 AP/QA3C1D20> ATA-? disk at ata0 as master > > ad0: 1554MB (3184170 sectors), 3158 cyls, 16 heads, 63 S/T, 512 B/S > > ad0: 16 secs/int, 0 depth queue > > ad3: <Maxtor 71626 AP/QA3C1D20> ATA-? disk at ata1 as slave > > ad3: 1554MB (3184170 sectors), 3158 cyls, 16 heads, 63 S/T, 512 B/S > > ad3: 16 secs/int, 0 depth queue > > acd0: <NEC CD-ROM DRIVE:285/3.04> CDROM drive at ata0 as slave > > acd0: drive speed 2067KB/sec, 128KB cache > > acd0: supported read types: CD-R, CD-DA > > acd0: Audio: play, 16 volume levels > > acd0: Mechanism: ejectable tray > > acd0: Medium: no/blank disc inside, unlocked > > afd0: <LS-120 COSM 02 UHD Floppy/0271C09T> rewriteable drive at ata1 as > > master > > afd0: 120MB (246528 sectors), 963 cyls, 8 heads, 32 S/T, 512 B/S > > afd0: Unknown media (0x0) > > changing root device to ad0s1a > > WARNING: / was not properly dismounted > > ffs_mountfs: superblock updated for soft updates > > ffs_mountfs: superblock updated for soft updates > > ffs_mountfs: superblock updated for soft updates > > > > Brian Feldman _ __ ___ ___ ___ > > green@unixhelp.org _ __ ___ | _ ) __| \ > > http://www.freebsd.org/ _ __ ___ ____ | _ \__ \ |) | > > FreeBSD: The Power to Serve! _ __ ___ ____ _____ |___/___/___/ > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-current" in the body of the message > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-current" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.05.9903041228060.29395-100000>