Date: Fri, 23 Jan 2026 10:37:45 +0000 (GMT) From: jenkins-admin@FreeBSD.org To: tuexen@FreeBSD.org, dev-ci@FreeBSD.org Cc: jenkins-admin@FreeBSD.org Subject: FreeBSD-main-amd64-test - Build #27706 - Failure Message-ID: <2032040238.2229.1769164665607@jenkins.ci.freebsd.org>
index | next in thread | raw e-mail
FreeBSD-main-amd64-test - Build #27706 (f31336b3e3146fed9cc517fef8e877c17496f9e0) - Failure Build information: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/27706/ Full change log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/27706/changes Full build log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/27706/console Status explanation: "Failure" - the build is suspected being broken by the following changes "Still Failing" - the build has not been fixed by the following changes and this is a notification to note that these changes have not been fully tested by the CI system Change summaries: (Those commits are likely but not certainly responsible) f31336b3e3146fed9cc517fef8e877c17496f9e0 by tuexen: dpnaa2: announce transmit checksum support The end of the build log: [...truncated 4.14 MiB...] epair1a: link state changed to DOWN carp: 1@epair1b: BACKUP -> INIT (hardware interface down) carp: demoted by 240 to 240 (interface down) epair1b: link state changed to DOWN carp: demoted by -240 to 0 (vhid removed) epair1b: promiscuous mode disabled passed [6.072s] sys/netinet/carp.py:TestCarp::test_source_mac -> epair0a: Ethernet address: 58:9c:fc:10:3e:f4 epair0b: Ethernet address: 58:9c:fc:10:35:74 epair0a: link state changed to UP epair0b: link state changed to UP lo0: link state changed to UP epair0a: promiscuous mode enabled carp: 1@epair0a: INIT -> BACKUP (initialization complete) carp: 1@epair0a: BACKUP -> MASTER (master timed out) carp: 1@epair0a: MASTER -> INIT (hardware interface down) carp: demoted by 240 to 240 (interface down) epair0a: link state changed to DOWN epair0b: link state changed to DOWN carp: demoted by -240 to 0 (vhid removed) epair0a: promiscuous mode disabled passed [6.130s] sys/netinet/carp.py:TestCarp::test_source_mac_vrrp -> epair0a: Ethernet address: 58:9c:fc:10:3e:f4 epair0b: Ethernet address: 58:9c:fc:10:35:74 epair0a: link state changed to UP epair0b: link state changed to UP lo0: link state changed to UP epair0a: promiscuous mode enabled carp: 1@epair0a: INIT -> BACKUP (initialization complete) carp: 1@epair0a: BACKUP -> MASTER (master timed out) carp: 1@epair0a: MASTER -> INIT (hardware interface down) carp: demoted by 240 to 240 (interface down) epair0a: link state changed to DOWN epair0b: link state changed to DOWN carp: demoted by -240 to 0 (vhid removed) epair0a: promiscuous mode disabled passed [6.529s] sys/netinet/divert:ipdivert_ip_input_local_success -> epair0a: Ethernet address: a6:b1:1a:d2:b9:86 epair0b: Ethernet address: d2:75:21:54:94:d9 epair0a: link state changed to UP epair0b: link state changed to UP epair0b: link state changed to DOWN epair0a: link state changed to DOWN passed [2.093s] sys/netinet/divert:ipdivert_ip_output_remote_success -> epair0a: Ethernet address: 56:cf:e9:50:54:2c epair0b: Ethernet address: 76:e2:3b:60:17:7c epair0a: link state changed to UP epair0b: link state changed to UP epair0b: link state changed to DOWN epair0a: link state changed to DOWN passed [2.111s] sys/netinet/fibs:fibs_ifroutes1_success -> epair0a: Ethernet address: 58:9c:fc:10:3e:f4 epair0b: Ethernet address: 58:9c:fc:10:35:74 epair0a: link state changed to UP epair0b: link state changed to UP epair0a: link state changed to DOWN epair0b: link state changed to DOWN passed [0.161s] sys/netinet/fibs_multibind_test:multibind_different_user_tcp -> skipped: FIB multibind not configured (net.inet.tcp.bind_all_fibs) [0.007s] sys/netinet/fibs_multibind_test:multibind_different_user_tcp6 -> skipped: FIB multibind not configured (net.inet.tcp.bind_all_fibs) [0.007s] sys/netinet/fibs_multibind_test:multibind_different_user_udp -> skipped: FIB multibind not configured (net.inet.udp.bind_all_fibs) [0.007s] sys/netinet/fibs_multibind_test:multibind_different_user_udp6 -> skipped: FIB multibind not configured (net.inet.udp.bind_all_fibs) [0.006s] sys/netinet/fibs_multibind_test:multibind_lbgroup_dgram_udp -> skipped: FIB multibind not configured (net.inet.udp.bind_all_fibs) [0.006s] sys/netinet/fibs_multibind_test:multibind_lbgroup_dgram_udp6 -> skipped: FIB multibind not configured (net.inet.udp.bind_all_fibs) [0.006s] sys/netinet/fibs_multibind_test:multibind_lbgroup_stream_tcp -> skipped: FIB multibind not configured (net.inet.tcp.bind_all_fibs) [0.006s] sys/netinet/fibs_multibind_test:multibind_lbgroup_stream_tcp6 -> skipped: FIB multibind not configured (net.inet.tcp.bind_all_fibs) [0.006s] sys/netinet/fibs_multibind_test:no_setfib_after_bind_tcp -> skipped: FIB multibind not configured (net.inet.tcp.bind_all_fibs) [0.006s] sys/netinet/fibs_multibind_test:no_setfib_after_bind_tcp6 -> skipped: FIB multibind not configured (net.inet.tcp.bind_all_fibs) [0.006s] sys/netinet/fibs_multibind_test:no_setfib_after_bind_udp -> skipped: FIB multibind not configured (net.inet.udp.bind_all_fibs) [0.006s] sys/netinet/fibs_multibind_test:no_setfib_after_bind_udp6 -> skipped: FIB multibind not configured (net.inet.udp.bind_all_fibs) [0.006s] sys/netinet/fibs_multibind_test:per_fib_dgram_socket_udp -> skipped: FIB multibind not configured (net.inet.udp.bind_all_fibs) [0.006s] sys/netinet/fibs_multibind_test:per_fib_dgram_socket_udp6 -> skipped: FIB multibind not configured (net.inet.udp.bind_all_fibs) [0.006s] sys/netinet/fibs_multibind_test:per_fib_listening_socket_tcp -> skipped: FIB multibind not configured (net.inet.tcp.bind_all_fibs) [0.006s] sys/netinet/fibs_multibind_test:per_fib_listening_socket_tcp6 -> skipped: FIB multibind not configured (net.inet.tcp.bind_all_fibs) [0.006s] sys/netinet/fibs_multibind_test:per_fib_raw_socket_raw -> skipped: FIB multibind not configured (net.inet.raw.bind_all_fibs) [0.006s] sys/netinet/fibs_multibind_test:per_fib_raw_socket_raw6 -> skipped: FIB multibind not configured (net.inet.raw.bind_all_fibs) [0.006s] sys/netinet/fibs_test:arpresolve_checks_interface_fib -> skipped: firewalls interfere with this test [0.097s] sys/netinet/fibs_test:default_route_with_multiple_fibs_on_same_subnet -> tap0: Ethernet address: 02:b0:3a:6e:be:2f tap1: Ethernet address: 26:9d:b0:62:b5:81 passed [0.136s] sys/netinet/fibs_test:default_route_with_multiple_fibs_on_same_subnet_inet6 -> tap0: Ethernet address: 8a:46:bf:d4:d4:f5 tap1: Ethernet address: 06:32:5a:c8:ae:29 passed [0.147s] sys/netinet/fibs_test:loopback_and_network_routes_on_nondefault_fib -> tap0: Ethernet address: 0e:b5:e6:b3:88:9b passed [0.116s] sys/netinet/fibs_test:loopback_and_network_routes_on_nondefault_fib_inet6 -> tap0: Ethernet address: 5a:54:e4:97:3d:a3 passed [0.122s] sys/netinet/fibs_test:same_ip_multiple_ifaces -> tap0: Ethernet address: 1e:24:cd:33:df:c4 tap1: Ethernet address: a2:3f:6a:1e:18:c1 tap2: Ethernet address: c2:7e:c2:67:c4:c7 tap3: Ethernet address: ce:e6:32:13:93:f7 passed [0.160s] sys/netinet/fibs_test:same_ip_multiple_ifaces_fib0 -> tap0: Ethernet address: ca:95:01:07:b5:68 tap1: Ethernet address: 6e:8d:aa:83:a9:a6 expected_failure: The test results in an ifconfig error and thus spuriously fails: atf-check failed; see the output of the test for details [0.108s] sys/netinet/fibs_test:same_ip_multiple_ifaces_inet6 -> tap0: Ethernet address: ee:dc:a2:9b:9c:31 tap1: Ethernet address: c6:f1:45:d4:5e:64 tap0: Ethernet address: a6:0e:a7:f7:3e:68 tap1: Ethernet address: 36:56:78:8e:6f:0a passed [0.193s] sys/netinet/fibs_test:slaac_on_nondefault_fib6 -> skipped: firewalls interfere with this test [0.105s] sys/netinet/fibs_test:subnet_route_with_multiple_fibs_on_same_subnet -> tap0: Ethernet address: 32:00:d2:64:69:61 tap1: Ethernet address: 1a:7f:a0:98:d5:54 passed [0.139s] sys/netinet/fibs_test:subnet_route_with_multiple_fibs_on_same_subnet_inet6 -> tap0: Ethernet address: da:29:22:8c:76:c9 tap1: Ethernet address: 42:e2:57:3f:87:1c passed [0.131s] sys/netinet/fibs_test:udp_dontroute -> tap0: Ethernet address: 7e:cb:ad:a6:87:68 tap1: Ethernet address: f6:7d:ff:e2:61:38 tap0: link state changed to UP tap0: link state changed to DOWN tap0: Ethernet address: 02:a2:5b:78:65:66 tap1: Ethernet address: 66:62:6f:b1:af:f5 tap1: link state changed to UP tap1: link state changed to DOWN passed [0.187s] sys/netinet/fibs_test:udp_dontroute6 -> tap0: Ethernet address: d6:90:59:a4:70:32 tap1: Ethernet address: 4a:d9:6e:c2:64:37 tap0: link state changed to UP tap0: link state changed to DOWN tap0: Ethernet address: 32:d6:3f:a0:87:af tap1: Ethernet address: fe:27:5f:78:d0:94 tap1: link state changed to UP tap1: link state changed to DOWN passed [0.188s] sys/netinet/forward:fwd_ip_blackhole -> epair0a: Ethernet address: be:bd:e9:3c:0b:36 epair0b: Ethernet address: aa:17:19:b3:c6:bc epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: b2:fc:c5:58:89:f5 epair1b: Ethernet address: 36:2f:81:4b:11:df epair1a: link state changed to UP epair1b: link state changed to UP lo0: link state changed to UP epair0b: link state changed to DOWN epair0a: link state changed to DOWN epair1b: link state changed to DOWN epair1a: link state changed to DOWN passed [3.299s] sys/netinet/forward:fwd_ip_icmp_gw_fast_success -> epair0a: Ethernet address: 02:df:16:6e:55:dc epair0b: Ethernet address: 06:1f:f9:bd:18:3b epair0a: link state changed to UP epair0b: link state changed to UP epair0a: promiscuous mode enabled Fatal trap 12: page fault while in kernel mode cpuid = 1; apic id = 01 fault virtual address = 0x30 fault code = supervisor read data, page not present instruction pointer = 0x20:0xffffffff80cfd838 stack pointer = 0x0:0xfffffe008be47c80 frame pointer = 0x0:0xfffffe008be47cf0 code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, long 1, def32 0, gran 1 processor eflags = interrupt enabled, resume, IOPL = 0 current process = 0 (epair_task) rdi: fffffe0082bf7a00 rsi: fffffe008be47c98 rdx: 0000000000000001 rcx: 0000000000000198 r8: 0000000000000002 r9: fffff80068461400 rax: 0000000000000000 rbx: fffff8006f693100 rbp: fffffe008be47cf0 r10: 0000000000000000 r11: 0000000000000001 r12: fffff8000395b000 r13: fffff800197ba780 r14: fffff8000372a100 r15: 0000000000000000 trap number = 12 panic: page fault cpuid = 1 time = 1769164662 KDB: stack backtrace: db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe008be479b0 vpanic() at vpanic+0x136/frame 0xfffffe008be47ae0 panic() at panic+0x43/frame 0xfffffe008be47b40 trap_pfault() at trap_pfault+0x47c/frame 0xfffffe008be47bb0 calltrap() at calltrap+0x8/frame 0xfffffe008be47bb0 --- trap 0xc, rip = 0xffffffff80cfd838, rsp = 0xfffffe008be47c80, rbp = 0xfffffe008be47cf0 --- bpf_mtap() at bpf_mtap+0x98/frame 0xfffffe008be47cf0 ether_nh_input() at ether_nh_input+0x109/frame 0xfffffe008be47d40 netisr_dispatch_src() at netisr_dispatch_src+0xb4/frame 0xfffffe008be47da0 ether_input() at ether_input+0xd5/frame 0xfffffe008be47e00 epair_tx_start_deferred() at epair_tx_start_deferred+0xd4/frame 0xfffffe008be47e40 taskqueue_run_locked() at taskqueue_run_locked+0x1c2/frame 0xfffffe008be47ec0 taskqueue_thread_loop() at taskqueue_thread_loop+0xd3/frame 0xfffffe008be47ef0 fork_exit() at fork_exit+0x82/frame 0xfffffe008be47f30 fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe008be47f30 --- trap 0, rip = 0, rsp = 0, rbp = 0 --- KDB: enter: panic [ thread pid 0 tid 100114 ] Stopped at kdb_enter+0x33: movq $0,0x11e96b2(%rip) db:0:kdb.enter.panic> show pcpu cpuid = 1 dynamic pcpu = 0xfffffe008d3c4100 curthread = 0xfffff800197ba780: pid 0 tid 100114 critnest 1 "epair_task" curpcb = 0xfffff800197bacd0 fpcurthread = none idlethread = 0xfffff8010240c000: tid 100004 "idle: cpu1" self = 0xffffffff82611000 curpmap = 0xffffffff81da0d00 tssp = 0xffffffff82611384 rsp0 = 0xfffffe008be48000 kcr3 = 0x80000000025a8004 ucr3 = 0xffffffffffffffff scr3 = 0x19cd98dd5 gs32p = 0xffffffff82611404 ldt = 0xffffffff82611444 tss = 0xffffffff82611434 curvnet = 0xfffff80068461400 spin locks held: db:0:kdb.enter.panic> reset Uptime: 47m26s + rc=0 + echo 'bhyve return code = 0' bhyve return code = 0 + sudo /usr/sbin/bhyvectl '--vm=testvm-main-amd64-27706' --destroy + sh -ex freebsd-ci/scripts/test/extract-meta.sh + METAOUTDIR=meta-out + rm -fr meta-out + mkdir meta-out + tar xvf meta.tar -C meta-out x ./ x ./disable-dtrace-tests.sh x ./auto-shutdown x ./run.sh x ./run-kyua.sh x ./disable-notyet-tests.sh x ./disable-zfs-tests.sh + rm -f test-report.txt test-report.xml + mv 'meta-out/test-report.*' . mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory + report=test-report.xml + [ -e freebsd-ci/jobs/FreeBSD-main-amd64-test/xfail-list -a -e test-report.xml ] + rm -f disk-cam + jot 5 + rm -f disk1 + rm -f disk2 + rm -f disk3 + rm -f disk4 + rm -f disk5 + rm -f disk-test.img [PostBuildScript] - [INFO] Executing post build scripts. [FreeBSD-main-amd64-test] $ /bin/sh -xe /tmp/jenkins4779926943493759645.sh + ./freebsd-ci/artifact/post-link.py Post link: {'job_name': 'FreeBSD-main-amd64-test', 'commit': 'f31336b3e3146fed9cc517fef8e877c17496f9e0', 'branch': 'main', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'} "Link created: main/latest_tested/amd64/amd64 -> ../../f31336b3e3146fed9cc517fef8e877c17496f9e0/amd64/amd64\n" Recording test results ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error? Checking for post-build Performing post-build step Checking if email needs to be generated Email was triggered for: Failure - Any Sending email for trigger: Failure - Any Sending mail from default account using System Admin e-mail addresshome | help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?2032040238.2229.1769164665607>