Date: Thu, 7 Apr 2005 21:38:56 +1000 From: Warren <shinjii@virusinfo.rdksupportinc.com> To: "Ronald Klop" <ronald-freebsd8@klop.yi.org> Cc: freebsd-stable@freebsd.org Subject: Re: Sound problem Message-ID: <200504072138.56687.shinjii@virusinfo.rdksupportinc.com> In-Reply-To: <opsou0wzbs8527sy@smtp.local> References: <200504071841.44277.shinjii@virusinfo.rdksupportinc.com> <200504072032.00765.shinjii@virusinfo.rdksupportinc.com> <opsou0wzbs8527sy@smtp.local>
next in thread | previous in thread | raw e-mail | index | archive | help
--Boundary-00=_QvRVCNTaAIpOr6j Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Content-Disposition: inline On Thu, 7 Apr 2005 9:30 pm, you wrote: > What does kldstat say after booting and after the manual kldload? > And do post your dmesg output. > Is there something logged in /var/log/messages? > Is your kernel in sync with world and with the modules? > Do you compile with extra optimizations? > Did you do a clean make world/kernel? > > Ronald. dmesg attached. Id Refs Address Size Name 1 7 0xc0400000 4b40b8 kernel 2 14 0xc08b5000 561a0 acpi.ko 3 1 0xc1d5a000 17000 linux.ko kldload of the sound module fails and kldstat shows the above before and after the attempt to load the via snd module. Nothing is logged in /var/log/messages to do with the attempt to load the via snd module. i compile stock standard, no optomizations. i run the cvs file then make buildworld then make installworld .. then i goto /usr/src/sys/i386/conf .. config my kernel file and go from there. Id have to say that my kernel is in sync with world and with the modules -- Yours Sincerely Shinjii http://www.shinji.nq.nu --Boundary-00=_QvRVCNTaAIpOr6j Content-Type: text/plain; charset="iso-8859-1"; name="dmesg.txt" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="dmesg.txt" Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.4-STABLE #26: Thu Apr 7 01:17:49 EST 2005 root@warren.shinji.nq.nu:/usr/src/sys/i386/compile/WARREN Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Athlon(tm) XP 2500+ (1836.13-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x6a0 Stepping = 0 Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> AMD Features=0xc0400000<AMIE,DSP,3DNow!> real memory = 536805376 (511 MB) avail memory = 515641344 (491 MB) ACPI APIC Table: <GBT AWRDACPI> ioapic0 <Version 0.3> irqs 0-23 on motherboard npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <GBT AWRDACPI> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_throttle0: <ACPI CPU Throttling> on cpu0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <VIA 8377 (Apollo KT400/KT400A/KT600) host to PCI bridge> mem 0xd0000000-0xd7ffffff at device 0.0 on pci0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) pci1: <display> at device 0.1 (no driver attached) pci0: <multimedia, audio> at device 10.0 (no driver attached) pci0: <input device> at device 10.1 (no driver attached) rl0: <RealTek 8139 10/100BaseTX> port 0xa800-0xa8ff mem 0xeb000000-0xeb0000ff irq 19 at device 11.0 on pci0 miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: Ethernet address: 00:e0:4c:01:32:e2 atapci0: <VIA 8237 UDMA133 controller> port 0xac00-0xac0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 15.0 on pci0 ata0: channel #0 on atapci0 ata1: channel #1 on atapci0 uhci0: <VIA 83C572 USB controller> port 0xb000-0xb01f irq 21 at device 16.0 on pci0 usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <VIA 83C572 USB controller> port 0xb400-0xb41f irq 21 at device 16.1 on pci0 usb1: <VIA 83C572 USB controller> on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <VIA 83C572 USB controller> port 0xb800-0xb81f irq 21 at device 16.2 on pci0 usb2: <VIA 83C572 USB controller> on uhci2 usb2: USB revision 1.0 uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pci0: <serial bus, USB> at device 16.4 (no driver attached) isab0: <PCI-ISA bridge> at device 17.0 on pci0 isa0: <ISA bus> on isab0 pci0: <multimedia, audio> at device 17.5 (no driver attached) fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 orm0: <ISA Option ROM> at iomem 0xc0000-0xccfff on isa0 pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/11.10, addr 2, iclass 3/1 ums0: 3 buttons and Z dir. Timecounter "TSC" frequency 1836127859 Hz quality 800 Timecounters tick every 10.000 msec ad0: 114473MB <ST3120022A/3.06> [232581/16/63] at ata0-master UDMA100 ad1: 114473MB <WDC WD1200JB-00GVA0/08.02D08> [232581/16/63] at ata0-slave UDMA100 acd0: DVDROM <LITE-ON DVD SOHD-167T/9S13> at ata1-master PIO4 acd1: CDRW <LITE-ON LTR-52327S/QS57> at ata1-slave PIO4 Mounting root from ufs:/dev/ad0s1a --Boundary-00=_QvRVCNTaAIpOr6j--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200504072138.56687.shinjii>