Date: Fri, 12 Mar 2004 13:18:34 +0000 From: Nick Cleaton <nick@cleaton.net> To: FreeBSD-gnats-submit@FreeBSD.org Subject: kern/64158: 5.2.1-RELEASE CD won't boot on acer TravelMate 291LCi laptop Message-ID: <20040312131834.GO24373@lt1.cleaton.net> Resent-Message-ID: <200403121330.i2CDUGGk063146@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 64158
>Category: kern
>Synopsis: 5.2.1-RELEASE CD won't boot on acer TravelMate 291LCi laptop
>Confidential: no
>Severity: serious
>Priority: medium
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Fri Mar 12 05:30:15 PST 2004
>Closed-Date:
>Last-Modified:
>Originator: Nick Cleaton <nick@cleaton.net>
>Release: FreeBSD 5.2.1-RELEASE i386
>Organization:
none
>Environment:
Attempting to boot an acer TravelMate 291LCi laptop from disk 1 of the
FreeBSD i386 5.2.1-RELEASE installation CD set.
md5 of the ISO I'm using: 9a1c764680504f5b7d2fb8c2d07de8e0
>Description:
The laptop hangs during the boot process, and the power button must be held
down for a few seconds to reboot.
I transcribed this boot log by hand, so there may be typos.
boot -vp:
SMAP type=01 base=0000000000000000 len=000000000009fc00
SMAP type=02 base=000000000009fc00 len=0000000000000400
SMAP type=02 base=00000000000e0000 len=0000000000020000
SMAP type=01 base=0000000000100000 len=000000001eef0000
SMAP type=03 base=000000001eff0000 len=000000000000ffc0
SMAP type=04 base=000000001effffc0 len=0000000000000040
SMAP type=02 base=00000000ffb80000 len=0000000000080000
SMAP type=02 base=00000000fff80000 len=0000000000080000
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RELEASE #0: Mon Feb 23 20:45:55 GMT 2004
root@wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0e1b000.
Preloaded mfs_root "/boot/mfsroot" at 0xc0e1b21c.
Calibrating clock(s) ... i8254 clock: 1193187 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1993182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1398816940 Hz
CPU: Intel(R) Pentium(R) M processor 1400MHz (1398.82-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x695 Stepping = 5
Features=0xa7e9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,C
LFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE>
real memory = 520028160 (495 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000001029000 - 0x000000001e711fff, 493785088 bytes (120553 pages)
avail memory = 491290624 (468 MB)
bios32: Found BIOS32 Service Directory header at 0xc00e7050
bios32: Entry = 0xe9810 (c00e9810) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xe7000+0x2824
pnpbios: Found PnP BIOS data at 0xc00ff020
pnpbios: Entry = eb000:3556 Rev = 1.0
pnpbios: Event flag at eb01e
pnpbios: OEM ID 8224744e
Other BIOS signatures found:
wlan: <802.11 Link Layer>
null: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pci_open(1): mode 1 addr port (0x0cf8) is 0x8000005c
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=35808086)
pcibios: BIOS version 2.10
Using $PIR table, 8 entries at 0xc00fe890
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 0 29 A 0x60 5 10 11
embedded 0 29 B 0x63 5 10 11
embedded 0 29 C 0x62 5 10 11
embedded 0 29 D 0x6b 5 10 11
embedded 0 31 A 0x62 5 10 11
embedded 0 31 B 0x61 5 10 11
embedded 0 2 A 0x60 5 10 11
embedded 0 2 B 0x61 5 10 11
embedded 0 0 A 0x60 5 10 11
embedded 0 0 B 0x61 5 10 11
embedded 1 0 A 0x68 5 10 11
embedded 1 1 A 0x69 5 10 11
embedded 1 2 A 0x6a 5 10 11
embedded 1 2 B 0x6b 5 10 11
embedded 1 4 A 0x60 5 10 11
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 3, range 32, base 00000000, size 0, enabled
found-> vendor=0x8086, dev=0x3580, revid=0x02
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x3584, revid=0x02
bus=0, slot=0, func=1
class=08-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0080, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x3585, revid=0x02
bus=0, slot=0, func=3
class=08-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x0080, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 3, range 32, base b0000000, size 27, enabled
map[14]: type 1, range 32, base f0000000, size 19, enabled
map[18]: type 4, range 32, base 0000e000, size 3, enabled
pci_cfgintr_valid: BIOS irq 11 is valid
pci_cfgintr: 0:2 INTA BIOS irq 11
found-> vendor=0x8086, dev=0x3582, revid=0x02
bus=0, slot=2, func=0
class=03-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a irq=11
powerspec 1 supports D0 D1 D3 current D0
map[10]: type 3, range 32, base 00000000, size 27, memory disabled
found-> vendor=0x8086, dev=0x3582, revid=0x02
The boot hung at this point, with the cursor on top of the 'f' at the
start of the last line.
>How-To-Repeat:
Boot an acer TravelMate 291LCi laptop from the installation CD.
>Fix:
>Release-Note:
>Audit-Trail:
>Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040312131834.GO24373>