Date: Mon, 18 Jun 2001 21:10:04 -0700 (PDT) From: Brad McNeney <mcneney@cs.sfu.ca> To: questions@FreeBSD.org Subject: trouble exporting fs Message-ID: <Pine.OSF.4.21.0106182107290.10412-100000@smahlt.math.sfu.ca>
next in thread | raw e-mail | index | archive | help
I'm having trouble exporting a filesystem on from a machine
running FreeBSD 4.3-STABLE to a Linux machine (RedHat 6.2).
The FreeBSD computer has 2 NICs. The external is connected to a
cable modem and the internal to a hub on a LAN with network addresses
192.168.100.xxx. The computer I want to export to has IP 192.168.100.200
The relevant part of dmesg (full output clipped below) reads:
Starting final network daemons:
mountd
Jun 18 20:51:36 cr269907-a mountd[165]: can't export /home
Jun 18 20:51:36 cr269907-a mountd[165]: bad exports list line /home
192.168.100.200
My /etc/exports file has just the one line:
/home 192.168.100.200
Output from netstat -rn:
Routing tables
Internet:
Destination Gateway Flags Netif Expire
default 24.113.160.1 UGSc dc0
24.113.160/22 link#1 UC dc0 =>
127.0.0.1 127.0.0.1 UH lo0
192.168.100 link#2 UC ed0 =>
Internet6:
Destination Gateway Flags Netif Expire
::1 ::1 UH lo0
fe80::%dc0/64 link#1 UC dc0
fe80::%ed0/64 link#2 UC ed0
fESG::%lo0/64 fe80::1%lo0 Uc lo0
ff01::/32 ::1 U lo0
ff02::%dc0/32 link#1 UC dc0
ff02::%ed0/32 link#2 UC ed0
ff02::%lo0/32 fe80::1%lo0 UC lo0
Any ideas on what I'm doing wrong?
Brad
-----------------------------------------------------------------------
Full output from dmesg:
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.3-STABLE #0: Sun Jun 17 17:04:22 PDT 2001
root@cr269907-a.poco1.bc.wave.home.com:/usr/obj/usr/src/sys/MYKERNEL
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (1004.52-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 536854528 (524272K bytes)
config> di pcic0
config> di sn0
config> di lnc0
config> di ie0
config> di fe0
config> di ed0
config> di cs0
config> en pcic1
config> po pcic1 0x3e2
config> ir pcic1 11
config> iom pcic1 0xd4000
config> f pcic1 0
config> q
avail memory = 518311936 (506164K bytes)
Preloaded elf kernel "kernel" at 0xc0459000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc045909c.
Preloaded elf module "splash_bmp.ko" at 0xc04590ec.
Pentium Pro MTRR support enabled
md0: Malloc disk
module_register_init: MOD_LOAD (splash_bmp, c0454798, 0) error 2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib2: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib2
pci1: <NVidia Riva Ultra Vanta TNT2 graphics accelerator> at 0.0 irq 9
isab0: <VIA 82C686 PCI-ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA66 controller> port 0xd800-0xd80f at device 4.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 10 at device 4.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xd000-0xd01f irq 10 at device 4.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
dc0: <Macronix 98715/98715A 10/100BaseTX> port 0xb800-0xb8ff mem 0xf7800000-0xf78000ff irq 5 at device 9.0 on pci0
dc0: Ethernet address: 00:80:c6:f9:c3:83
miibus0: <MII bus> on dc0
dcphy0: <Intel 21143 NWAY media interface> on miibus0
dcphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ed0: <NE2000 PCI Ethernet (RealTek 8029)> port 0xb400-0xb41f irq 11 at device 11.0 on pci0
ed0: address 00:60:67:3b:de:ef, type NE2000 (16 bit)
pcib1: <Host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib1
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model 4D Mouse, device ID 6
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: IEEE1284 device found /NIBBLE/PS2/ECP
Probing for PnP devices on ppbus0:
ppbus0: <Lexmark International Lexmark Optra E310> PRINTER PCL 6 Emulation, PostScript Level 2 Emulation, NPAP, PJL
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad0: 14655MB <Maxtor 91536U3> [29777/16/63] at ata0-master UDMA66
acd0: CDROM <ASUS CD-S500/A> at ata1-slave using PIO4
Mounting root from ufs:/dev/ad0s1a
swapon: adding /dev/ad0s1b as swap device
Automatic boot in progress...
/dev/ad0s1a:
FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s1a:
clean, 10754 free
(346 frags, 1301 blocks, 0.7% fragmentation)
/dev/ad0s1g:
FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s1g:
clean, 7484077 free
(581 frags, 935437 blocks, 0.0% fragmentation)
/dev/ad0s1f:
FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s1f:
clean, 3721191 free
(51167 frags, 458753 blocks, 0.9% fragmentation)
/dev/ad0s1e:
FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s1e:
clean, 3037 free
(61 frags, 372 blocks, 0.3% fragmentation)
Doing initial network setup:
hostname
.
dc0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 24.113.163.96 netmask 0xfffffc00 broadcast 24.113.163.255
inet6 fe80::280:c6ff:fef9:c383%dc0 prefixlen 64 tentative scopeid 0x1
ether 00:80:c6:f9:c3:83
media: autoselect (none) status: active
supported media: autoselect 100baseTX <full-duplex> 100baseTX 10baseT/UTP <full-duplex> 10baseT/UTP 100baseTX <hw-loopback> none
ed0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 192.168.100.100 netmask 0xffffff00 broadcast 192.168.100.255
inet6 fe80::260:67ff:fe3b:deef%ed0 prefixlen 64 tentative scopeid 0x2
ether 00:60:67:3b:de:ef
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x9
inet6 ::1 prefixlen 128
inet 127.0.0.1 netmask 0xff000000
add net default: gateway 24.113.160.1
Additional routing options:
TCP keepalive=YES
.
Routing daemons:
.
Additional daemons:
syslogd
.
Doing additional network setup:
portmap
.
Starting final network daemons:
mountd
Jun 18 20:51:36 cr269907-a mountd[165]: can't export /home
Jun 18 20:51:36 cr269907-a mountd[165]: bad exports list line /home 192.168.100.200
nfsd
rpc.statd
.
ELF ldconfig path: /usr/lib /usr/lib/compat /usr/X11R6/lib /usr/local/lib
a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout /usr/X11R6/lib/aout
Starting standard daemons:
inetd
cron
sendmail
.
Jun 18 20:51:37 cr269907-a sendmail[197]: f5J30aE44624: SYSERR(root): Cannot open hash database /etc/mail/aliases.db: Inappropriate file type or format
Initial rc.i386 initialization:
.
Configuring syscons:
blank_time
screensaver
moused
.
Additional ABI support:
linux
.
Local package initialization:
apache
mysql
.
Additional TCP options:
.
Mon Jun 18 20:51:43 PDT 2001
kill:
45246
:
No such process
Jun 18 20:52:10 cr269907-a login: ROOT LOGIN (root) ON ttyv0
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.OSF.4.21.0106182107290.10412-100000>