Date: Wed, 22 Mar 2000 11:49:48 +0200 From: "David" <david@campsbay.za.net> To: <freebsd-stable@freebsd.org> Subject: ep problem Message-ID: <00ce01bf93e3$f7c538e0$0201a8c0@DAVID>
next in thread | raw e-mail | index | archive | help
No ep driver is working with FreeBSD 4.0-release i know that, it even stalls on install when i install from the boot disks... Now i would like to know if i downloaded 4.0-stable and boot disks from there would that fix the problem ? Would the boot disks work from there and the actual ep driver ? please respond bye ----- Original Message ----- From: "Mitsuru IWASAKI" <iwasaki@jp.FreeBSD.org> To: <winter@jurai.net> Cc: <iwasaki@jp.FreeBSD.org>; <freebsd-stable@FreeBSD.ORG> Sent: Wednesday, March 22, 2000 11:11 AM Subject: Re: FIXED --> Thanks! Re: ep0 eeprom failed to come ready... > > On Wed, 22 Mar 2000, Mitsuru IWASAKI wrote: > > > Certainly. Attached gzip+tar+uuencoded file contains > > > dmesg.boot - Output of a verbose boot (w/o ep driver in configuration). > > > > Could I have this with the ep driver configured? > > Grrr, It's too difficult because I can't do anything after the messsage > even etner DDB or pause screen and back scrolling... > > > > If `device ep' line is enabled in my configuration, the following > > > messages come up and boot procedure seems to stop... > > > > > > ep0: <3Com 3C509-TPO Etherlink III> at port 0x300-0x30f irq 10 on isa0 > > > ep0: eeprom failed to come ready. > > > ep0: eeprom failed to come ready. > > > ep0: eeprom failed to come ready. > > > ep0: eeprom failed to come ready. > > > ep0: eeprom failed to come ready. > > > ep0: Ethernet address 00:00:00:00:00:00 > > > > Yep, but I need the output of a verbose boot when you get this error > > message. > > I can get only last 24 lines but prior lines seems to be the same as > posted before. > > EGA/VGA parameters to be used for mode 24 > 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 > bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 > b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c > 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff > sc0: <System console> on isa0 > sc0: VGA <16 virtual consoles, flags=0x200> > sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) > sio0: irq maps: 0x1 0x11 0x1 0x1 > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > sio0: type 16550A > sio1: irq maps: 0x1 0x9 0x1 0x1 > sio1 at port 0x2f8-0x2ff irq 3 on isa0 > sio1: type 16550A > mss_detect, busy still set (0xff) > ep0: <3Com 3C509-TPO Etherlink III> at port 0x300-0x30f irq 10 on isa0 > ep0: eeprom failed to come ready. > ep0: eeprom failed to come ready. > ep0: eeprom failed to come ready. > ep0: eeprom failed to come ready. > ep0: eeprom failed to come ready. > ep0: Ethernet address 00:00:00:00:00:00 > > Thanks. > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-stable" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?00ce01bf93e3$f7c538e0$0201a8c0>