Date: Tue, 2 May 2017 10:50:07 +0200 From: Emmanuel Vadot <manu@bidouilliste.com> To: mattia.rossi.mate@gmail.com Cc: ARM <freebsd-arm@freebsd.org> Subject: Re: OrangePi-Plus-2 boot process hangs in ubldr.bin Message-ID: <20170502105007.0424f8cb7c8021951bf04495@bidouilliste.com> In-Reply-To: <f95b8a1b-1d92-4402-4fc6-e8b2006b593b@gmail.com> References: <f95b8a1b-1d92-4402-4fc6-e8b2006b593b@gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sun, 30 Apr 2017 13:07:23 +0200
Mattia Rossi <mattia.rossi.mate@gmail.com> wrote:
> Hi all,
Hello,
> I've tried to upgrade u-boot on the OrangePi-Plus-2 (not the 2e) from
> mainline u-boot and on the outside it looks fine.
When you say mainline, what exact version did you took ?
I assume you took some patches also as it seems that your u-boot have
API support.
> U-boot loads, and it boots ubldr.bin.
>
> I'm using the orangepi-plus-2e.dtb as it has been working well for this
> board before (It all used to work).
>
> Now ubldr can't boot the kernel though, and I don't know why. I've
> rebuilt ubldr, world and kernel from svn. Revision number is 317594
>
> Any help would be appreciated
>
> The output before it stops is:
>
> U-Boot SPL 2017.05-rc2-00061-g12af9399e7 (Apr 25 2017 - 19:27:44)
> DRAM: 2048 MiB
> Trying to boot from MMC1
>
>
> U-Boot 2017.05-rc2-00061-g12af9399e7 (Apr 25 2017 - 19:27:44 +0200)
> Allwinner Technology
>
> CPU: Allwinner H3 (SUN8I 1680)
> Model: Xunlong Orange Pi Plus 2E
> I2C: ready
> DRAM: 2 GiB
> MMC: SUNXI SD/MMC: 0, SUNXI SD/MMC: 1
> In: serial
> Out: serial
> Err: serial
> Net: phy interface7
> eth0: ethernet@1c30000
> starting USB...
> USB0: USB EHCI 1.00
> USB1: USB OHCI 1.0
> USB2: USB EHCI 1.00
> USB3: USB OHCI 1.0
> USB4: USB EHCI 1.00
> USB5: USB OHCI 1.0
> scanning bus 0 for devices... 1 USB Device(s) found
> scanning bus 2 for devices... 1 USB Device(s) found
> scanning bus 4 for devices... 1 USB Device(s) found
> scanning usb for storage devices... 0 Storage Device(s) found
> Hit any key to stop autoboot: 0
> Booting from: mmc 0 ubldr.bin
> reading ubldr.bin
> 237168 bytes read in 34 ms (6.7 MiB/s)
> ## No elf image at address 0x42000000
> ## Starting application at 0x42000000 ...
> Consoles: U-Boot console
> Compatible U-Boot API signature found @0xbbf3f690
>
> FreeBSD/armv6 U-Boot loader, Revision 1.2
> (Sat Apr 29 19:16:42 CEST 2017 root@freebsd101)
>
> DRAM: 2048MB
> MMC Device 2 not found
> MMC Device 3 not found
> Number of U-Boot devices: 2
> U-Boot env: loaderdev='mmc 0'
> Found U-Boot device: disk
> Checking unit=0 slice=<auto> partition=<auto>... good.
> Booting from disk0s2:
> /boot/kernel/kernel data=0x6a82c0+0x1a7d40 syms=[0x4+0xba030+0x4+0xaa532]
>
> Hit [Enter] to boot immediately, or any other key for command prompt.
> Booting [/boot/kernel/kernel]...
> /boot/dtb/orangepi-plus-2e.dtb size=0x6326
> Loaded DTB from file 'orangepi-plus-2e.dtb'.
> Kernel entry at 0x42200100...
> Kernel args: (null)
This is probably a cache problem, the u-boot from ports (using imp@
branch on github) do take care of that.
>
> The u-boot environment looks like this:
>
> => printenv
> Fatboot=echo Booting from: ${fatdev} ${bootfile}; fatload ${fatdev}
> ${kernel_addr_r} ${bootfile} && bootelf || go ${kernel_addr_r};
> SetupFatdev=env exists fatdev || env set fatdev 'mmc 0';
> api_address=bbf3f690
> baudrate=115200
> bootcmd=run Fatboot
> bootfile=ubldr.bin
> bootm_size=0xa000000
> console=ttyS0,115200
> eth1addr=12:81:5a:66:27:6f
> ethact=ethernet@1c30000
> ethaddr=02:81:5a:66:27:6f
> fatdev=mmc 0
> fdt_addr_r=0x43000000
> fdtcontroladdr=bbf39b68
> fdtfile=orangepi-plus-2e.dtb
> ipaddr=192.168.0.200
> kernel_addr_r=0x42000000
> loaderdev=mmc 0
> preboot=usb start; env exists bootfile || env set bootfile ubldr.bin;
> env exists SetupFatdev && run SetupFatdev; env exists UserPreboot && run
> UserPreboot;
> pxefile_addr_r=0x43200000
> ramdisk_addr_r=0x43300000
> scriptaddr=0x43100000
> serial#=02c000815a66276f
> stderr=serial,vga
> stdin=serial,usbkbd
> stdout=serial,vga
>
> Environment size: 898/131068 bytes
> =>
>
>
> The loader variables are the following:
>
> loader> show
> LINES=24
> autoboot_delay=10
> bootfile=kernel
> console=uboot
> currdev=disk0s2:
> interpret=OK
> kernel=kernel
> kernelname=/boot/kernel/kernel
> loaddev=disk0s2:
> loader_conf_files=/boot/loader.conf /boot/loader.conf.local
> module_path=/boot/kernel;/boot/kernel;/boot/modules;/boot/dtb
> prompt=loader>
> twiddle_divisor=1
> loader>
>
>
> The filesystem can be found:
>
> loader> ls
> /
> d .snap
> COPYRIGHT
> d bin
> d boot
> d dev
> d etc
> d lib
> d libexec
> d media
> d mnt
> d proc
> d rescue
> d root
> d sbin
> l sys
> d tmp
> d usr
> d var
> loader> ls boot
> boot
> d kernel
> d defaults
> d dtb
> d firmware
> d modules
> d zfs
> loader.efi
> boot1.efi
> boot1.efifat
> menu.rc.sample
> ubldr
> ubldr.bin
> beastie.4th
> brand.4th
> brand-fbsd.4th
> check-password.4th
> color.4th
> delay.4th
> frames.4th
> loader.4th
> loader.help
> logo-beastie.4th
> logo-beastiebw.4th
> menu.4th
> logo-fbsdbw.4th
> logo-orb.4th
> logo-orbbw.4th
> menu-commands.4th
> menusets.4th
> screen.4th
> shortcuts.4th
> support.4th
> version.4th
> loader.rc
> efi.4th
> loader>
>
> Other info from ubldr:
>
> loader> devinfo
> MMC Device 2 not found
> MMC Device 3 not found
> U-Boot devices:
> device info (0):
> cookie = 0xbbf3f0b8
> type = 0x00000082
> type = MMC
> blk size = 512
> blk count = 30318592
>
> device info (1):
> cookie = 0xbbf3f4c0
> type = 0x00000082
> type = MMC
> blk size = 512
> blk count = 30535680
>
> loader> sysinfo
> U-Boot system info:
> sys info:
> clkbus = 0 MHz
> clkcpu = 0 MHz
> bar = 0x00000000
> ---
> start = 0x40000000
> size = 0x80000000
> type = DRAM
> ---
> loader>
>
> U-boot variables are found in ubldr:
>
> loader> ubenv show
> uboot.preboot=usb start; env exists bootfile || env set bootfile
> ubldr.bin; env exists SetupFatdev && run SetupFatdev; env exists
> UserPreboot && run UserPreboot;
> uboot.bootm_size=0xa000000
> uboot.loaderdev=mmc 0
> uboot.fatdev=mmc 0
> uboot.fdtcontroladdr=bbf39b68
> uboot.serial#=02c000815a66276f
> uboot.pxefile_addr_r=0x43200000
> uboot.eth1addr=12:81:5a:66:27:6f
> uboot.api_address=bbf3f690
> uboot.scriptaddr=0x43100000
> uboot.ethaddr=02:81:5a:66:27:6f
> uboot.fdt_addr_r=0x43000000
> uboot.stdin=serial,usbkbd
> uboot.baudrate=115200
> uboot.ethact=ethernet@1c30000
> uboot.bootcmd=run Fatboot
> uboot.kernel_addr_r=0x42000000
> uboot.filesize=39e70
> uboot.bootfile=ubldr.bin
> uboot.fdtfile=orangepi-plus-2e.dtb
> uboot.fileaddr=42000000
> uboot.stdout=serial,vga
> uboot.ramdisk_addr_r=0x43300000
> uboot.Fatboot=echo Booting from: ${fatdev} ${bootfile}; fatload
> ${fatdev} ${kernel_addr_r} ${bootfile} && bootelf || go ${kernel_addr_r};
> uboot.console=ttyS0,115200
> uboot.SetupFatdev=env exists fatdev || env set fatdev 'mmc 0';
> uboot.ipaddr=192.168.0.200
> uboot.stderr=serial,vga
> loader>
>
> Kernel and modules seem loaded...
>
> loader> lsmod
> 0x42200000: /boot/kernel/kernel (elf kernel, 0x9b456c)
> modules: aw_ccung.1 aw_ccu.1 aw_reset.1 a10hdmiaudio.1 a10hdmi.1
> aw_thermal.1 aw_sid.1 axp81x.1 axp2xx.1 rsb.1 awusbphy.1 a10codec.1
> ufs.1 krpc.1 cryptosoft.1 crypto.1 nfslockd.1 nfssvc.1 nfslock.1 ipsec.1
> ether.1 zlib.1 aio.1 sysvshm.1 sysvsem.1 sysvmsg.1 acl_posix1e.1
> acl_nfs4.1 kernel.1200030 cd9660.1 g_part.0 g_flashmap.0 pseudofs.1
> procfs.1 nfscl.1 nfs.1 nfscommon.1 msdosfs.1 videomode.1 usb_quirk.1
> ums.1 ukbd.1 uhub.1 usb.1 umass.1 midi.1 sound.5 random_device.1
> random_harvestq.1 ofwbus.1 null.1 mmc.3 mii_bitbang.1 miibus.1 mem.1
> ofw_iicbus.1 iicbus.1 iic.1 ofw_gpiobus.1 gpioc.1 gpiobus.1 fbd.1
> ofw_regulator_bus.1 clk_fixed.1 ofw_clkbus.1 ahci.1 cam.1
>
> Thanks,
>
> Mat
>
> _______________________________________________
> freebsd-arm@freebsd.org mailing list
> https://lists.freebsd.org/mailman/listinfo/freebsd-arm
> To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.org"
--
Emmanuel Vadot <manu@bidouilliste.com>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20170502105007.0424f8cb7c8021951bf04495>