Date: Tue, 7 Sep 2004 00:20:25 GMT From: Jonas Nagel <fireball@zerouptime.ch> To: freebsd-bugs@FreeBSD.org Subject: Re: kern/71310: kernel crash on rtprio pid priority change Message-ID: <200409070020.i870KPCU002605@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
The following reply was made to PR kern/71310; it has been noted by GNATS.
From: Jonas Nagel <fireball@zerouptime.ch>
To: freebsd-gnats-submit@FreeBSD.org, fireball@zerouptime.ch
Cc:
Subject: Re: kern/71310: kernel crash on rtprio pid priority change
Date: Tue, 07 Sep 2004 02:08:24 +0200
This might be helpful too:
root@hirtnb03:~# cat /var/run/dmesg.boot
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.3-BETA3 #0: Sun Sep 5 18:19:18 CEST 2004
root@hirtnb03.hirt.ch:/usr/obj/usr/src/sys/GENERIC
WARNING: WITNESS option enabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Mobile Intel(R) Pentium(R) 4 - M CPU 1.90GHz (1893.87-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf27 Stepping = 7
Features=0xbfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
real memory = 536215552 (511 MB)
avail memory = 515026944 (491 MB)
netsmb_dev: loaded
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <IBM TP-1O> on motherboard
acpi_ec_ecdt_probe: can't get handle
ACPI-0358: *** Error: Region EmbeddedControl(3) has no handler
ACPI-1303: *** Error: Method execution failed [\\_SB_.PCI0.LPC_.EC__._INI] (Node 0xc1a73420), AE_NOT_EXIST
ACPI-0358: *** Error: Region EmbeddedControl(3) has no handler
ACPI-1303: *** Error: Method execution failed [\\_SB_.PCI0.LPC_.EC__.BAT0._STA] (Node 0xc1a77d80), AE_NOT_EXIST
ACPI-0239: *** Error: Method execution failed [\\_SB_.PCI0.LPC_.EC__.BAT0._STA] (Node 0xc1a77d80), AE_NOT_EXIST
ACPI-0358: *** Error: Region EmbeddedControl(3) has no handler
ACPI-1303: *** Error: Method execution failed [\\_SB_.PCI0.LPC_.EC__.BAT1._STA] (Node 0xc1a77c00), AE_NOT_EXIST
ACPI-0239: *** Error: Method execution failed [\\_SB_.PCI0.LPC_.EC__.BAT1._STA] (Node 0xc1a77c00), AE_NOT_EXIST
ACPI-0358: *** Error: Region EmbeddedControl(3) has no handler
ACPI-1303: *** Error: Method execution failed [\\_SB_.PCI0.LPC_.EC__.BGID] (Node 0xc1a7b9a0), AE_NOT_EXIST
ACPI-1303: *** Error: Method execution failed [\\_SB_.PCI0.LPC_.EC__.BINI] (Node 0xc1a7b9c0), AE_NOT_EXIST
ACPI-1303: *** Error: Method execution failed [\\_SB_.PCI0.LPC_.EC__.BSTA] (Node 0xc1a7ba00), AE_NOT_EXIST
ACPI-1303: *** Error: Method execution failed [\\_SB_.PCI0.IDE0.SCND.MSTR._STA] (Node 0xc1a7b8c0), AE_NOT_EXIST
ACPI-0239: *** Error: Method execution failed [\\_SB_.PCI0.IDE0.SCND.MSTR._STA] (Node 0xc1a7b8c0), AE_NOT_EXIST
ACPI-0358: *** Error: Region EmbeddedControl(3) has no handler
ACPI-1303: *** Error: Method execution failed [\\_SB_.PCI0.LPC_.EC__.BGID] (Node 0xc1a7b9a0), AE_NOT_EXIST
ACPI-1303: *** Error: Method execution failed [\\_SB_.PCI0.LPC_.EC__.BINI] (Node 0xc1a7b9c0), AE_NOT_EXIST
ACPI-1303: *** Error: Method execution failed [\\_SB_.PCI0.LPC_.EC__.BSTA] (Node 0xc1a7ba00), AE_NOT_EXIST
ACPI-1303: *** Error: Method execution failed [\\_SB_.PCI0.USB0.URTH.UNST._STA] (Node 0xc1a7c2c0), AE_NOT_EXIST
ACPI-0239: *** Error: Method execution failed [\\_SB_.PCI0.USB0.URTH.UNST._STA] (Node 0xc1a7c2c0), AE_NOT_EXIST
ACPI-0358: *** Error: Region EmbeddedControl(3) has no handler
ACPI-1303: *** Error: Method execution failed [\\_SB_.PCI0.LPC_.EC__.BGID] (Node 0xc1a7b9a0), AE_NOT_EXIST
ACPI-1303: *** Error: Method execution failed [\\_SB_.PCI0.LPC_.EC__.BINI] (Node 0xc1a7b9c0), AE_NOT_EXIST
ACPI-1303: *** Error: Method execution failed [\\_SB_.PCI0.LPC_.EC__.BSTA] (Node 0xc1a7ba00), AE_NOT_EXIST
ACPI-1303: *** Error: Method execution failed [\\_SB_.PCI0.USB7.URTH.UNST._STA] (Node 0xc1a7bcc0), AE_NOT_EXIST
ACPI-0239: *** Error: Method execution failed [\\_SB_.PCI0.USB7.URTH.UNST._STA] (Node 0xc1a7bcc0), AE_NOT_EXIST
ACPI-0358: *** Error: Region EmbeddedControl(3) has no handler
ACPI-1303: *** Error: Method execution failed [\\_SB_.PCI0.LPC_.EC__.BGID] (Node 0xc1a7b9a0), AE_NOT_EXIST
ACPI-1303: *** Error: Method execution failed [\\_SB_.PCI0.LPC_.EC__.BINI] (Node 0xc1a7b9c0), AE_NOT_EXIST
ACPI-1303: *** Error: Method execution failed [\\_SB_.PCI0.LPC_.EC__.BSTA] (Node 0xc1a7ba00), AE_NOT_EXIST
ACPI-1303: *** Error: Method execution failed [\\_SB_.NEST._STA] (Node 0xc1a7b720), AE_NOT_EXIST
ACPI-0239: *** Error: Method execution failed [\\_SB_.NEST._STA] (Node 0xc1a7b720), AE_NOT_EXIST
acpi0: Power Button (fixed)
acpi_ec0: <Embedded Controller: GPE 0x1c> port 0x66,0x62 on acpi0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU (3 Cx states)> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82845 host to AGP bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x1800-0x181f irq 11 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0x1820-0x183f irq 11 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0x1840-0x185f irq 11 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
cbb0: <TI1510 PCI-CardBus Bridge> mem 0x50000000-0x50000fff irq 11 at device 0.0 on pci2
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
fwohci0: <Texas Instruments TSB43AB21/A/AI/A-EP> mem 0xd0200000-0xd0203fff,0xd0205000-0xd02057ff irq 11 at device 7.0 on pci2
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:06:1b:00:20:04:c7:04
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:06:1b:04:c7:04
fwe0: Ethernet address: 02:06:1b:04:c7:04
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
fxp0: <Intel 82801DB (ICH4) Pro/100 VE Ethernet> port 0x8000-0x803f mem 0xd0204000-0xd0204fff irq 11 at device 8.0 on pci2
miibus0: <MII bus> on fxp0
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:06:1b:c0:d9:f4
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port 0x1860-0x186f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pcm0: <Intel ICH4 (82801DB)> port 0x18c0-0x18ff,0x1c00-0x1cff mem 0xd0000800-0xd00008ff,0xd0000c00-0xd0000dff irq 11 at device 31.5 on pci0
pcm0: [GIANT-LOCKED]
pcm0: <Analog Devices AD1981B AC97 Codec>
pci0: <simple comms> at device 31.6 (no driver attached)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Synaptics Touchpad, device ID 0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 8250 or not responding
ppc0 port 0x3bc-0x3be irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio1 port 0x2f8-0x2ff irq 3 drq 3 on acpi0
sio1: type 16550A
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
orm0: <ISA Option ROMs> at iomem 0xdc000-0xdffff,0xd1000-0xd1fff,0xd0000-0xd0fff on isa0
pmtimer0 on isa0
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1893868664 Hz quality 800
Timecounters tick every 10.000 msec
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
cardbus0: Resource not specified in CIS: id=10, size=20
cardbus0: Resource not specified in CIS: id=18, size=10000
acx0: <Texas Instruments (TI) 802.11b+ 22Mbps Wireless Adapter> port 0x4000-0x401f mem 0xd0220000-0xd022ffff,0xd0230000-0xd0230fff irq 11 at device 0.0 on cardbus0
acx0: Ethernet address: 00:80:c8:ad:7a:ec
acx0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
acx0: 802.11 address: 00:80:c8:ad:7a:ec
acx0: Eeprom Rev 4 Domain ETSI Europe (1-13), Firmware Rev 1.9.8.b
acx0: Radio Type 0x11, Antenna 0x00, CCA Mode 0x0d, ED Threshold 0x70
acx0: (c) http://wlan.kewl.org/ 2003-2004
ad0: 35345MB <FUJITSU MHS2040AT D/8205> [71813/16/63] at ata0-master UDMA100
ATAPI_RESET time = 140us
acd0: CDRW <HL-DT-STCD-RW/DVD DRIVE GCC-4240N/0211> at ata1-master UDMA33
Mounting root from ufs:/dev/ad0s2a
Btw. the custom module if_acx.ko was added after reproduction of the
issue.
--
Jonas Nagel <fireball@zerouptime.ch>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200409070020.i870KPCU002605>