Date: Fri, 23 Jun 2000 20:00:07 -0700 (PDT) From: "Nawfal M. Rouyan" <op4l@yahoo.com> To: freebsd-stable@freebsd.org Subject: sudden reboots mounting msdos partition Message-ID: <20000624030007.21357.qmail@web1603.mail.yahoo.com>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --]
Hi all,
I have a problem here. When I mount an msdos
partition which resides on the /dev/ad1s1, FreeBSD 4.0
stable as of June 20th will hang and then reboots. The
msdos is on my second hd (Quantum 4.3CR) which is a
slave using the same cable with my primary drive
(Quantum lct 15Gig).
This also happened when I mount FreeBSD's
filesystem (ffs with softupdates) which also resides
in my second hd. I deleted all FreeBSD filesystems and
change it to fat32 to see whether the problem will
disappear but it doesn't.
I'm using VIA 133 Appollo chipset on EPOX 6VBA
motherboard. This problem started when I add the new
hd which is my primary hd. Mounting filesystems on the
slave hd will make FreeBSD reboots. This also happened
when I mount filesystem on the primary hd to the
secondary hd back when FreeBSD 4.0 stable still
resides in my original Quantum 4.3CR hd. (transfering
files to new hd)
I still remember that there are problems with via
chipstes but it has been resolved(?). There is also a
problem with the ad driver and I would like to know
whether this is because of the ad driver or something
else.
Attached is my dmesg output. thanks...
=====
Nawfal bin Mohmad Rouyan o _ _ _
op4l@yahoo.com _o /\_ _ \\o (_)\__/o (_)
_< \_ _>(_) (_)/<_ \_| \ _|/' \/
(_)>(_) (_) (_) (_) (_)' _\o_
__________________________________________________
Do You Yahoo!?
Get Yahoo! Mail - Free email you can access from anywhere!
http://mail.yahoo.com/
[-- Attachment #2 --]
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-STABLE #0: Tue Jun 20 12:05:08 MYT 2000
root@opal.cyber.mmu.edu.my:/usr/src/sys/compile/KODOMO
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (449.24-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x665 Stepping = 5
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 201261056 (196544K bytes)
avail memory = 192778240 (188260K bytes)
Preloaded elf kernel "kernel" at 0xc02b8000.
VESA: v3.0, 4096k memory, flags:0x1, mode table:0xc026b742 (1000022)
VESA: NVidia
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib2: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib2
pci1: <NVidia/SGS-Thomson Riva128 graphics accelerator> at 0.0 irq 11
isab0: <VIA 82C686 PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA66 controller> port 0xe000-0xe00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
ed0: <NE2000 PCI Ethernet (RealTek 8029)> port 0xec00-0xec1f irq 11 at device 8.0 on pci0
ed0: address 00:00:e8:e8:4c:2a, type NE2000 (16 bit)
pcib1: <Host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib1
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppi0: <Parallel I/O> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
plip0: <PLIP network interface> on ppbus0
sbc0: <Avance Asound 110> at port 0x220-0x22f irq 5 drq 1,0 on isa0
sbc0: setting card to irq 5, drq 1, 0
pcm0: <SB DSP 4.02> on sbc0
unknown0: <PnP Sound Chip> at port 0x388-0x38f on isa0
unknown1: <PnP Sound Chip> at port 0x200-0x207 on isa0
unknown2: <PnP Sound Chip> at port 0x330-0x331 irq 9 on isa0
ad0: 14324MB <QUANTUM FIREBALLlct10 15> [29104/16/63] at ata0-master using UDMA66
ad1: 4110MB <QUANTUM FIREBALL CR4.3A> [14848/9/63] at ata0-slave using UDMA66
acd0: CDROM <PCA248CD> at ata1-slave using PIO4
Mounting root from ufs:/dev/ad0s2a
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20000624030007.21357.qmail>