Date: Wed, 19 Jun 2002 09:21:08 -0300 (BRT) From: Paulo Fragoso <paulo@nlink.com.br> To: Jan Demter <jan@demter.de> Cc: freebsd-stable@freebsd.org Subject: Re: 4.6-RELEASE -> 4.5-RELENG Message-ID: <20020619091815.B91912-200000@mirage.nlink.com.br> In-Reply-To: <20020619140137.5a53fe0f.jan@demter.de>
next in thread | previous in thread | raw e-mail | index | archive | help
[-- Attachment #1 --]
On Wed, 19 Jun 2002, Jan Demter wrote:
> On Wed, 19 Jun 2002 08:52:00 -0300 (BRT)
> Paulo Fragoso <paulo@nlink.com.br> wrote:
>
> > acd0: CD-RW <LG CD-RW CED-8120B> at ata1-slave WDMA2
> > ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>
> It should probably be ata1-master? Or is a master present and your
> `dmesg`-output is incomplete about that?
>
We was using at ata1-slave without a master device and it was working
fine.
Our dmesg is in attach file.
Thanks,
Paulo.
>
> Jan
> --
> All extremists should be taken out and shot.
>
--
__O
_-\<,_ Why drive when you can bike?
(_)/ (_)
[-- Attachment #2 --]
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.6-RELEASE #2: Mon Jun 17 14:03:24 BRT 2002
paulo@j1.nlink.com.br:/usr/src/sys/compile/KERNEL6
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (851.94-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x68a Stepping = 10
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 134152192 (131008K bytes)
avail memory = 125403136 (122464K bytes)
Preloaded elf kernel "kernel" at 0xc0505000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 7 entries at 0xc00fdf10
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <NVidia Riva Vanta TNT2 graphics accelerator> at 0.0
isab0: <VIA 82C686 PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA66 controller> port 0xd000-0xd00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 11 at device 7.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 11 at device 7.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci0: <unknown card> (vendor=0x1106, dev=0x3057) at 7.4
pcm0: <VIA VT82C686A> port 0xe400-0xe403,0xe000-0xe003,0xdc00-0xdcff irq 10 at device 7.5 on pci0
ahc0: <Adaptec 2940 Pro Ultra SCSI adapter> port 0xe800-0xe8ff mem 0xd9101000-0xd9101fff irq 9 at device 8.0 on pci0
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xec00-0xec3f mem 0xd9000000-0xd90fffff,0xd9100000-0xd9100fff irq 9 at device 9.0 on pci0
fxp0: Ethernet address 00:d0:b7:8f:83:e4
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bktr0: <BrookTree 848A> mem 0xd9102000-0xd9102fff irq 11 at device 11.0 on pci0
iicbb0: <I2C bit-banging driver> on bti2c0
iicbus0: <Philips I2C bus> on iicbb0 master-only
iicbus1: <Philips I2C bus> on iicbb0 master-only
smbus0: <System Management Bus> on bti2c0
smb0: <SMBus general purpose I/O> on smbus0
bktr0: AVer Media TV/FM, Philips FR1216 PAL FM tuner.
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc87ff,0xc9000-0xc9fff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
joy0 at port 0x201 on isa0
ppc0: <Parallel port> at port 0x378-0x37f on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: IEEE1284 device found /NIBBLE/ECP
Probing for PnP devices on ppbus0:
ppbus0: <HEWLETT-PACKARD DESKJET 930C> MLC,PCL,PML
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Polled port
ppi0: <Parallel I/O> on ppbus0
ppc1: <Parallel port> at port 0x278-0x27f on isa0
ppc1: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus1: IEEE1284 device found /NIBBLE/ECP
Probing for PnP devices on ppbus1:
ppbus1: <Hewlett-Packard HP LaserJet 1100.1.0> PRINTER MLC,MFPDTF1,PCL,PJL
plip1: <PLIP network interface> on ppbus1
lpt1: <Printer> on ppbus1
lpt1: Polled port
ppi1: <Parallel I/O> on ppbus1
IP packet filtering initialized, divert disabled, rule-based forwarding enabled, default to deny, unlimited logging
ad0: 38166MB <ST340810A> [77545/16/63] at ata0-master UDMA66
acd0: CD-RW <LG CD-RW CED-8120B> at ata1-slave WDMA2
Waiting 15 seconds for SCSI devices to settle
sa0 at ahc0 bus 0 target 5 lun 0
sa0: <SEAGATE DAT 06240-XXX 8071> Removable Sequential Access SCSI-3 device
sa0: 10.000MB/s transfers (5.000MHz, offset 8, 16bit)
Mounting root from ufs:/dev/ad0s1a
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020619091815.B91912-200000>