Date: Wed, 15 Jun 2005 21:59:34 +0500 From: Katu <boynagar@gmail.com> To: freebsd-current@freebsd.org Subject: Re: Cannot boot June snapshot Message-ID: <f0d84caa05061509592c2be71d@mail.gmail.com> In-Reply-To: <f0d84caa0506150646f5faa6f@mail.gmail.com> References: <f0d84caa0506150646f5faa6f@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
[-- Attachment #1 --]
>
> I have an old HP Kayak XU (dual PII 300 MHz) that was happily running
> Windows NT 4, then Linux with 2.4 kernel, then FreeBSD 5.2.1. Today I
> tried to install 6-CURRENT snapshot from June, and during boot it
> repeats the same error messages regarding ahc0 over and over. Please
> see attached verbose boot log.
>
> What is the problem? Is it a hardware issue or something else? I still
> have the machine connected to serial console if you need more
> information.
>
> Thanks,
>
> Arthur
>
I just tried with 5.4-RELEASE, it didn't work too, so I guess
something changed between 5.2.1 and 5.3. Attached is the boot log from
6.0 snapshot
[-- Attachment #2 --]
OK boot -v
GDB: no debug ports present
KDB: debugger backends: ddb
KDB: current backend: ddb
SMAP type=01 base=0000000000000000 len=000000000009e400
SMAP type=02 base=000000000009e400 len=0000000000001c00
SMAP type=02 base=00000000000f0c00 len=000000000000f400
SMAP type=01 base=0000000000100000 len=0000000007f00000
SMAP type=02 base=00000000fec00000 len=0000000000010000
SMAP type=02 base=00000000fee00000 len=0000000000001000
SMAP type=02 base=00000000fffe0000 len=0000000000020000
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.0-CURRENT-SNAP004 #0: Thu Jun 2 06:12:51 UTC 2005
root@wv1u.samsco.home:/usr/obj/usr/src/sys/GENERIC
WARNING: WITNESS option enabled, expect reduced performance.
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0eb2000.
Preloaded mfs_root "/boot/mfsroot" at 0xc0eb216c.
MP Configuration Table version 1.4 found at 0xc009e560
APIC: Using the MPTable enumerator.
SMP: Added CPU 1 (BSP)
SMP: Added CPU 0 (AP)
MPTable: <HP XU/XW >
Calibrating clock(s) ... i8254 clock: 1193194 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 300012452 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (300.01-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x634 Stepping = 4
Features=0x80fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMO
V,MMX>
real memory = 134217728 (128 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009dfff, 643072 bytes (157 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000001028000 - 0x0000000007d8ffff, 114720768 bytes (28008 pages)
avail memory = 117690368 (112 MB)
APIC ID: physical 0, logical 0:0
APIC ID: physical 1, logical 0:1
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 1
cpu1 (AP): APIC ID: 0
bios32: Found BIOS32 Service Directory header at 0xc00f77c0
bios32: Entry = 0xfd77d (c00fd77d) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xfd710+0x289
pnpbios: Found PnP BIOS data at 0xc00f77f0
pnpbios: Entry = f0000:b6ee Rev = 1.0
Other BIOS signatures found:
ioapic0: Assuming intbase of 0
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: intpin 0 -> ExtINT (edge, high)
ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
ioapic0: intpin 16 -> PCI IRQ 16 (level, low)
ioapic0: intpin 17 -> PCI IRQ 17 (level, low)
ioapic0: intpin 18 -> PCI IRQ 18 (level, low)
ioapic0: intpin 19 -> PCI IRQ 19 (level, low)
ioapic0: intpin 20 -> PCI IRQ 20 (level, low)
ioapic0: intpin 21 -> PCI IRQ 21 (level, low)
ioapic0: intpin 22 -> PCI IRQ 22 (level, low)
ioapic0: intpin 23 -> PCI IRQ 23 (level, low)
ioapic0: intpin 1 bus ISA
ioapic0: intpin 1 trigger: edge
ioapic0: intpin 1 polarity: high
ioapic0: intpin 2 bus ISA
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0: intpin 2 trigger: edge
ioapic0: intpin 2 polarity: high
ioapic0: intpin 3 bus ISA
ioapic0: intpin 3 trigger: edge
ioapic0: intpin 3 polarity: high
ioapic0: intpin 4 bus ISA
ioapic0: intpin 4 trigger: edge
ioapic0: intpin 4 polarity: high
ioapic0: intpin 5 bus ISA
ioapic0: intpin 5 trigger: edge
ioapic0: intpin 5 polarity: high
ioapic0: intpin 6 bus ISA
ioapic0: intpin 6 trigger: edge
ioapic0: intpin 6 polarity: high
ioapic0: intpin 7 bus ISA
ioapic0: intpin 7 trigger: edge
ioapic0: intpin 7 polarity: high
ioapic0: intpin 8 bus ISA
ioapic0: intpin 8 trigger: edge
ioapic0: intpin 8 polarity: high
ioapic0: intpin 16 bus PCI
ioapic0: intpin 16 trigger: level
ioapic0: intpin 16 polarity: low
ioapic0: intpin 19 bus PCI
ioapic0: intpin 19 trigger: level
ioapic0: intpin 19 polarity: low
ioapic0: intpin 11 bus ISA
ioapic0: intpin 11 trigger: edge
ioapic0: intpin 11 polarity: high
ioapic0: intpin 12 bus ISA
ioapic0: intpin 12 trigger: edge
ioapic0: intpin 12 polarity: high
ioapic0: intpin 13 bus ISA
ioapic0: intpin 13 trigger: edge
ioapic0: intpin 13 polarity: high
ioapic0: intpin 14 bus ISA
ioapic0: intpin 14 trigger: edge
ioapic0: intpin 14 polarity: high
ioapic0: intpin 15 bus ISA
ioapic0: intpin 15 trigger: edge
ioapic0: intpin 15 polarity: high
ioapic0: intpin 19 bus PCI
ioapic0: intpin 19 trigger: level
ioapic0: intpin 19 polarity: low
ioapic0: intpin 18 bus PCI
ioapic0: intpin 18 trigger: level
ioapic0: intpin 18 polarity: low
ioapic0: intpin 16 bus PCI
ioapic0: intpin 16 trigger: level
ioapic0: intpin 16 polarity: low
ioapic0: intpin 18 bus PCI
ioapic0: intpin 18 trigger: level
ioapic0: intpin 18 polarity: low
lapic: Routing ExtINT -> LINT0
lapic: LINT0 trigger: edge
lapic: LINT0 polarity: high
lapic: Routing NMI -> LINT1
lapic: LINT1 trigger: edge
lapic: LINT1 polarity: high
ioapic0 <Version 1.1> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x01000000 VER: 0x00040011 LDR: 0x02000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00000000 err: 0x00010000 pcm: 0x00010000
wlan: <802.11 Link Layer>
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
io: <I/O>
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
cpu0 on motherboard
cpu1 on motherboard
pci_open(1): mode 1 addr port (0x0cf8) is 0x8000005c
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71808086)
pcibios: BIOS version 2.10
Found $PIR table, 10 entries at 0xc00fdf20
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
slot 1 0 16 A 0x61 3 4 5 6 7 9 10 11 12 14 15
slot 1 0 16 B 0x62 3 4 5 6 7 9 10 11 12 14 15
slot 1 0 16 C 0x63 3 4 5 6 7 9 10 11 12 14 15
slot 1 0 16 D 0x60 3 4 5 6 7 9 10 11 12 14 15
slot 2 0 17 A 0x62 3 4 5 6 7 9 10 11 12 14 15
slot 2 0 17 B 0x63 3 4 5 6 7 9 10 11 12 14 15
slot 2 0 17 C 0x60 3 4 5 6 7 9 10 11 12 14 15
slot 2 0 17 D 0x61 3 4 5 6 7 9 10 11 12 14 15
slot 3 0 18 A 0x60 3 4 5 6 7 9 10 11 12 14 15
slot 3 0 18 B 0x61 3 4 5 6 7 9 10 11 12 14 15
slot 3 0 18 C 0x62 3 4 5 6 7 9 10 11 12 14 15
slot 3 0 18 D 0x63 3 4 5 6 7 9 10 11 12 14 15
slot 4 0 19 A 0x61 3 4 5 6 7 9 10 11 12 14 15
slot 4 0 19 B 0x62 3 4 5 6 7 9 10 11 12 14 15
slot 4 0 19 C 0x63 3 4 5 6 7 9 10 11 12 14 15
slot 4 0 19 D 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 7 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 7 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 0 7 C 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 0 7 D 0x63 3 4 5 6 7 9 10 11 12 14 15
slot 33 1 0 A 0x62 3 4 5 6 7 9 10 11 12 14 15
slot 33 1 0 B 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 0 8 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 9 A 0x63 3 4 5 6 7 9 10 11 12 14 15
pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x8086, dev=0x7180, revid=0x03
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x2290, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 3, range 32, base f8000000, size 26, enabled
found-> vendor=0x8086, dev=0x7181, revid=0x03
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x000f, statreg=0x02a0, cachelnsz=0 (dwords)
lattimer=0x60 (2880 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x7110, revid=0x01
bus=0, slot=7, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x010f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x7111, revid=0x01
bus=0, slot=7, func=1
class=01-01-80, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 0000fcb0, size 4, enabled
found-> vendor=0x8086, dev=0x7112, revid=0x01
bus=0, slot=7, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=10
map[20]: type 4, range 32, base 0000fce0, size 5, enabled
pcib0: slot 7 INTD routed to irq 19
found-> vendor=0x8086, dev=0x7113, revid=0x01
bus=0, slot=7, func=3
class=06-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[90]: type 4, range 32, base 00008800, size 4, enabled
found-> vendor=0x9004, dev=0x8378, revid=0x01
bus=0, slot=8, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0017, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x08 (2000 ns)
intpin=a, irq=9
powerspec 1 supports D0 D3 current D0
map[10]: type 4, range 32, base 0000f800, size 8, enabled
map[14]: type 1, range 32, base fedff000, size 12, enabled
pcib0: slot 8 INTA routed to irq 16
found-> vendor=0x9004, dev=0x6078, revid=0x03
bus=0, slot=9, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0017, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x04 (1000 ns)
intpin=a, irq=10
powerspec 1 supports D0 D3 current D0
map[10]: type 4, range 32, base 0000f400, size 8, enabled
map[14]: type 1, range 32, base fedfe000, size 12, enabled
pcib0: slot 9 INTA routed to irq 19
found-> vendor=0x1022, dev=0x2000, revid=0x25
bus=0, slot=17, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0047, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x06 (1500 ns), maxlat=0xff (63750 ns)
intpin=a, irq=9
map[10]: type 4, range 32, base 0000fcc0, size 5, enabled
map[14]: type 1, range 32, base fedfdc00, size 5, enabled
pcib0: slot 17 INTA routed to irq 18
found-> vendor=0x9004, dev=0x1478, revid=0x01
bus=0, slot=18, func=0
class=05-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0017, statreg=0x0280, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x02 (500 ns)
intpin=a, irq=9
map[10]: type 4, range 32, base 0000f000, size 8, enabled
map[14]: type 1, range 32, base fedfc000, size 12, enabled
map[18]: type 3, range 32, base fc000000, size 25, enabled
pcib0: slot 18 INTA routed to irq 16
agp0: <Intel 82443LX (440 LX) host to PCI bridge> mem 0xf8000000-0xfbffffff at d
evice 0.0 on pci0
agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xf8000000
agp0: allocating GATT for aperture of size 64M
pcib1: <MPTable PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xfe000000-0xfebfffff
pcib1: prefetched decode 0xf6000000-0xf6ffffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
found-> vendor=0x102b, dev=0x051f, revid=0x00
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=9
map[10]: type 3, range 32, base f6000000, size 24, enabled
pcib1: (null) requested memory range 0xf6000000-0xf6ffffff: good
map[14]: type 1, range 32, base febf8000, size 14, enabled
pcib1: (null) requested memory range 0xfebf8000-0xfebfbfff: good
map[18]: type 1, range 32, base fe000000, size 23, enabled
pcib1: (null) requested memory range 0xfe000000-0xfe7fffff: good
pcib1: slot 0 INTA routed to irq 18
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x37
6,0xfcb0-0xfcbf at device 7.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfcb0
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: stat1=0x00 err=0x04 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ata1: [MPSAFE]
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xfce0-0xfcff irq 19 at de
vice 7.2 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xfce0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
piix0: <PIIX Timecounter> port 0x8800-0x880f at device 7.3 on pci0
Timecounter "PIIX" frequency 3579545 Hz quality 0
ahc0: <Adaptec 398X Ultra SCSI RAID adapter> port 0xf800-0xf8ff mem 0xfedff000-0
xfedfffff irq 16 at device 8.0 on pci0
ahc0: Defaulting to MEMIO off
ahc0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xf800
ahc0: Reading SEEPROM...done.
ahc0: internal 50 cable not present, internal 68 cable not present
ahc0: external cable not present
ahc0: BIOS eeprom is present
ahc0: High byte termination Enabled
ahc0: Low byte termination Enabled
ahc0: Downloading Sequencer Program... 441 instructions downloaded
ahc0: Features 0x10005, Bugs 0x11, Flags 0x20485563
ahc0: [GIANT-LOCKED]
aic7880: Ultra Wide Channel B, SCSI Id=15, 16/253 SCBs
ahc1: <Adaptec aic7860 Ultra SCSI adapter> port 0xf400-0xf4ff mem 0xfedfe000-0xf
edfefff irq 19 at device 9.0 on pci0
ahc1: Defaulting to MEMIO off
ahc1: Reserved 0x100 bytes for rid 0x10 type 4 at 0xf400
ahc1: Reading SEEPROM...done.
ahc1: Low byte termination enabled
ahc1: Downloading Sequencer Program... 460 instructions downloaded
ahc1: Features 0x10101, Bugs 0x35, Flags 0x8485560
ahc1: [GIANT-LOCKED]
aic7860: Ultra Single Channel A, SCSI Id=7, 3/253 SCBs
pcn0: Reserved 0x20 bytes for rid 0x10 type 4 at 0xfcc0
pcn0: <AMD PCnet/PCI 10/100BaseTX> port 0xfcc0-0xfcdf mem 0xfedfdc00-0xfedfdc1f
irq 18 at device 17.0 on pci0
pcn0: Chip ID 2623 (Am79C971)
miibus0: <MII bus> on pcn0
lxtphy0: <LXT970 10/100 media interface> on miibus0
lxtphy0: 100baseFX, 100baseFX-FDX, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-F
DX, auto
pcn0: bpf attached
pcn0: Ethernet address: 00:60:b0:c3:a9:7e
pcn0: if_start running deferred for Giant
pcn0: [GIANT-LOCKED]
pci0: <memory> at device 18.0 (no driver attached)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
pnp_identify: Trying Read_Port at 203
ADS7180: start dependent (0)
ADS7180: adding irq mask 0xa0
ADS7180: adding dma mask 0x2
ADS7180: adding dma mask 0xb
ADS7180: adding io range 0x220-0x24f, size=0x10, align=0x20
ADS7180: adding io range 0x388-0x38b, size=0x4, align=0x8
ADS7180: adding io range 0x500-0x56f, size=0x10, align=0x10
ADS7180: start dependent (1)
ADS7180: adding irq mask 0x4a0
ADS7180: adding dma mask 0xb
ADS7180: adding dma mask 0xb
ADS7180: adding io range 0x220-0x24f, size=0x10, align=0x20
ADS7180: adding io range 0x388-0x38b, size=0x4, align=0x8
ADS7180: adding io range 0x500-0x56f, size=0x10, align=0x10
ADS7180: start dependent (1)
ADS7180: adding irq mask 0x8ea0
ADS7180: adding dma mask 0xb
ADS7180: adding dma mask 0xb
ADS7180: adding io range 0x220-0x2ef, size=0x10, align=0x20
ADS7180: adding io range 0x388-0x3bb, size=0x4, align=0x8
ADS7180: adding io range 0x500-0x56f, size=0x10, align=0x10
ADS7180: start dependent (2)
ADS7180: adding irq mask 0x8ea0
ADS7180: adding dma mask 0xb
ADS7180: adding io range 0x220-0x2ef, size=0x10, align=0x20
ADS7180: adding io range 0x388-0x3bb, size=0x4, align=0x8
ADS7180: adding io range 0x500-0x56f, size=0x10, align=0x10
ADS7180: end dependent
ADS7181: start dependent (0)
ADS7181: adding irq mask 0xaa0
ADS7181: adding io range 0x300-0x331, size=0x2, align=0x30
ADS7181: start dependent (1)
ADS7181: adding irq mask 0x8ea0
ADS7181: adding io range 0x300-0x421, size=0x2, align=0x30
ADS7181: end dependent
ADS7182: start dependent (0)
ADS7182: adding io range 0x200-0x207, size=0x8, align=0x8
ADS7182: start dependent (1)
ADS7182: adding io range 0x200-0x20f, size=0x8, align=0x8
ADS7182: end dependent
PNP Identify complete
ex_isa_identify()
pnpbios: 17 devices, largest 184 bytes
PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000
PNP0c01: adding fixed memory32 range 0xdc000-0xfffff, size=0x24000
PNP0c01: adding fixed memory32 range 0x100000-0x7ffffff, size=0x7f00000
pnpbios: handle 0 device ID PNP0c01 (010cd041)
PNP0c02: adding io range 0x96-0x97, size=0x2, align=0x1
PNP0c02: adding fixed io range 0x2e-0x2f, size=0x2, align=0x1
PNP0c02: adding io range 0xe0-0xe7, size=0x8, align=0x1
PNP0c02: adding io range 0xe8-0xe9, size=0x2, align=0x1
PNP0c02: adding io range 0x8400-0x8403, size=0x4, align=0x1
PNP0c02: adding io range 0x8404-0x8407, size=0x4, align=0x1
PNP0c02: adding io range 0x8408-0x8409, size=0x2, align=0x1
PNP0c02: adding io range 0x8410-0x841f, size=0x10, align=0x1
PNP0c02: adding io range 0x80-0x80, size=0x1, align=0x1
PNP0c02: adding fixed memory32 range 0xfffe0000-0xffffffff, size=0x20000
pnpbios: handle 1 device ID PNP0c02 (020cd041)
PNP0200: adding io range 0-0xf, size=0x10, align=0x1
PNP0200: adding io range 0x81-0x8f, size=0xf, align=0x1
PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0x1
PNP0200: adding dma mask 0x10
pnpbios: handle 2 device ID PNP0200 (0002d041)
PNP0100: adding io range 0x40-0x43, size=0x4, align=0x1
PNP0100: adding irq mask 0x1
pnpbios: handle 4 device ID PNP0100 (0001d041)
PNP0b00: adding io range 0x70-0x71, size=0x2, align=0x1
PNP0b00: adding irq mask 0x100
pnpbios: handle 5 device ID PNP0b00 (000bd041)
PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1
PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1
PNP0303: adding irq mask 0x2
pnpbios: handle 6 device ID PNP0303 (0303d041)
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1
PNP0c04: adding irq mask 0x2000
pnpbios: handle 7 device ID PNP0c04 (040cd041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1
pnpbios: handle 8 device ID PNP0800 (0008d041)
PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0x1
pnpbios: handle 10 device ID PNP0a03 (030ad041)
PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0x1
PNP0c02: adding io range 0x8000-0x803f, size=0x40, align=0x1
PNP0c02: adding io range 0x8800-0x880f, size=0x10, align=0x1
pnpbios: handle 11 device ID PNP0c02 (020cd041)
PNP0c02: adding fixed memory32 range 0xfec00000-0xfec0ffff, size=0x10000
PNP0c02: adding fixed memory32 range 0xfee00000-0xfee00fff, size=0x1000
pnpbios: handle 12 device ID PNP0c02 (020cd041)
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0x8
PNP0501: adding irq mask 0x10
pnpbios: handle 13 device ID PNP0501 (0105d041)
PNP0401: adding io range 0x378-0x37f, size=0x8, align=0x8
PNP0401: adding io range 0x778-0x77f, size=0x8, align=0x8
PNP0401: adding irq mask 0x80
PNP0401: adding dma mask 0x2
pnpbios: handle 14 device ID PNP0401 (0104d041)
PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0x8
PNP0700: adding io range 0x3f7-0x3f7, size=0x1, align=0x1
PNP0700: adding irq mask 0x40
PNP0700: adding dma mask 0x4
pnpbios: handle 16 device ID PNP0700 (0007d041)
PNP0501: adding io range 0x2f8-0x2ff, size=0x8, align=0x8
PNP0501: adding irq mask 0x8
pnpbios: handle 17 device ID PNP0501 (0105d041)
pnpbios: handle 18 device ID PNP0f13 (130fd041)
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xd6fff on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0045
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x1d0000
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0045
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
psm0: failed to reset the aux device.
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0: ic_type 90 part_id 73
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: ic_type 90 part_id 73
fdc0: [MPSAFE]
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x68a1 0x68b1 0x68a1 0x68a1
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio1: irq maps: 0x68a1 0x68a9 0x68a1 0x68a1
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
unknown: <PNP0c02> can't assign resources (memory)
unknown: <PNP0c02> on isa0
adv1: Invalid baseport of 0x0 specified. Nearest valid baseport is 0x100. Faili
ng probe.
adv1: Invalid baseport of 0x40 specified. Nearest valid baseport is 0x100. Fail
ing probe.
adv1: Invalid baseport of 0x70 specified. Nearest valid baseport is 0x100. Fail
ing probe.
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0303> at port 0x60 on isa0
adv1: Invalid baseport of 0xf0 specified. Nearest valid baseport is 0x100. Fail
ing probe.
adv1: Invalid baseport of 0x61 specified. Nearest valid baseport is 0x100. Fail
ing probe.
unknown: <PNP0800> failed to probe at port 0x61 on isa0
adv1: Invalid baseport of 0xcf8 specified. Nearest valid baseport is 0x330. Fai
ling probe.
unknown: <PNP0c02> can't assign resources (port)
unknown: <PNP0c02> at port 0x4d0-0x4d1 on isa0
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> at port 0x3f8-0x3ff on isa0
unknown: <PNP0401> can't assign resources (port)
unknown: <PNP0401> at port 0x378-0x37f on isa0
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0700> at port 0x3f0-0x3f5 on isa0
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> at port 0x2f8-0x2ff on isa0
psmcpnp0: irq resource info is missing; assuming irq 12
psmcpnp0: <PS/2 mouse port> at irq 12 on isa0
psm0: current command byte:0045
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
psm0: failed to reset the aux device.
adv1: Invalid baseport of 0x220 specified. Nearest valid baseport is 0x230. Fai
ling probe.
unknown: <Analog Devices AD1816A> failed to probe at port 0x220-0x22f,0x388-0x38
b,0x500-0x50f irq 5 drq 1,0 on isa0
adv1: Invalid baseport of 0x300 specified. Nearest valid baseport is 0x330. Fai
ling probe.
unknown: <Analog Devices AD1816A> failed to probe at port 0x300-0x301 irq 9 on i
sa0
adv1: Invalid baseport of 0x200 specified. Nearest valid baseport is 0x210. Fai
ling probe.
unknown: <Analog Devices AD1816A> failed to probe at port 0x200-0x207 on isa0
Device configuration finished.
procfs registered
lapic: Divisor 2, Frequency 33334648 hz
Timecounter "TSC" frequency 300012452 Hz quality -100
Timecounters tick every 1.000 msec
lo0: bpf attached
Waiting 15 seconds for SCSI devices to settle
(noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
(noperiph:ahc1:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
md0: Preloaded image </boot/mfsroot> 4423680 bytes at 0xc0a78dc4
ata0-master: pio=PIO3 wdma=WDMA1 udma=BIOSDMA cable=40 wire
acd0: setting PIO3 on Intel PIIX4 chip
acd0: <MATSHITA CR-585/ZP18> CDROM drive at ata0 as master
acd0: read 4125KB/s (4125KB/s), 128KB buffer, PIO3
acd0: Reads: CDR, CDRW, CDDA stream, packet
acd0: Writes:
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: CD-ROM unknown
ahc1: Selection Timeout on A:0. 0 SCBs aborted
ahc1: Selection Timeout on A:1. 0 SCBs aborted
ahc1: Selection Timeout on A:2. 0 SCBs aborted
ahc1: Selection Timeout on A:3. 0 SCBs aborted
ahc1: Selection Timeout on A:4. 0 SCBs aborted
ahc1: Selection Timeout on A:5. 0 SCBs aborted
ahc1: Selection Timeout on A:6. 0 SCBs aborted
ahc0: Recovery Initiated
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahc0: Dumping Card State while idle, at SEQADDR 0x17f
Card was paused
ACCUM = 0x0, SINDEX = 0x20, DINDEX = 0xa0, ARG_2 = 0x2
HCNT = 0x20 SCBPTR = 0x0
SCSISIGI[0x0] ERROR[0x40]:(PCIERRSTAT) SCSIBUSL[0x0]
LASTPHASE[0x1]:(P_BUSFREE) SCSISEQ[0x12]:(ENAUTOATNP|ENRSELI)
SBLKCTL[0x2]:(SELWIDE) SCSIRATE[0x0] SEQCTL[0x10]:(FASTMODE)
SEQ_FLAGS[0xc0]:(NO_CDB_SENT|NOT_IDENTIFIED) SSTAT0[0x4]:(SDONE)
SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] SIMODE0[0x0] SIMODE1[0xa4]:(ENSCSIPERR|ENSCS
IRST|ENSELTIMO)
SXFRCTL0[0x80]:(DFON) DFCNTRL[0xc]:(DIRECTION|HDMAEN)
DFSTATUS[0x71]:(FIFOEMP|MREQPEND|FIFOQWDEMP|DFCACHETH)
STACK: 0xe 0x0 0x0 0x174
SCB count = 20
Kernel NEXTQSCB = 14
Card NEXTQSCB = 9
QINFIFO entries: 9 8 7 6 5 4 3 2 1 0 19 18 17 16 15
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Sequencer SCB Info:
0 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
1 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
2 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
3 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
4 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
5 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
6 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
7 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
8 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
9 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
10 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
11 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
12 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
13 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
14 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
15 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
Pending list:
15 SCB_CONTROL[0x0] SCB_SCSIID[0xef]:(TWIN_CHNLB|OID) SCB_LUN[0x0]
16 SCB_CONTROL[0x0] SCB_SCSIID[0xcf]:(TWIN_CHNLB|OID) SCB_LUN[0x0]
17 SCB_CONTROL[0x0] SCB_SCSIID[0xbf]:(TWIN_CHNLB|OID) SCB_LUN[0x0]
18 SCB_CONTROL[0x0] SCB_SCSIID[0x9f]:(TWIN_CHNLB|OID) SCB_LUN[0x0]
19 SCB_CONTROL[0x0] SCB_SCSIID[0x5f]:(OID) SCB_LUN[0x0]
0 SCB_CONTROL[0x0] SCB_SCSIID[0x2f]:(OID) SCB_LUN[0x0]
1 SCB_CONTROL[0x0] SCB_SCSIID[0x1f]:(OID) SCB_LUN[0x0]
2 SCB_CONTROL[0x0] SCB_SCSIID[0xdf]:(TWIN_CHNLB|OID) SCB_LUN[0x0]
3 SCB_CONTROL[0x0] SCB_SCSIID[0xaf]:(TWIN_CHNLB|OID) SCB_LUN[0x0]
4 SCB_CONTROL[0x0] SCB_SCSIID[0x8f]:(TWIN_CHNLB|OID) SCB_LUN[0x0]
5 SCB_CONTROL[0x0] SCB_SCSIID[0x7f]:(OID|TWIN_TID) SCB_LUN[0x0]
6 SCB_CONTROL[0x0] SCB_SCSIID[0x6f]:(OID) SCB_LUN[0x0]
7 SCB_CONTROL[0x0] SCB_SCSIID[0x4f]:(OID) SCB_LUN[0x0]
8 SCB_CONTROL[0x0] SCB_SCSIID[0x3f]:(OID) SCB_LUN[0x0]
9 SCB_CONTROL[0x0] SCB_SCSIID[0xf]:(OID) SCB_LUN[0x0]
Kernel Free SCB list: 13 12 11 10
Untagged Q(0): 9
Untagged Q(1): 1
Untagged Q(2): 0
Untagged Q(3): 8
Untagged Q(4): 7
Untagged Q(5): 19
Untagged Q(6): 6
Untagged Q(7): 5
Untagged Q(8): 4
Untagged Q(9): 18
Untagged Q(10): 3
Untagged Q(11): 17
Untagged Q(12): 16
Untagged Q(13): 2
Untagged Q(14): 15
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
(probe13:ahc0:0:13:0): SCB 0x2 - timed out
sg[0] - Addr 0x7aee284 : Length 36
(probe13:ahc0:0:13:0): SCB 2: Immediate reset. Flags = 0x620
(probe13:ahc0:0:13:0): no longer in timeout, status = 25b
ahc0: Issued Channel A Bus Reset. 15 SCBs aborted
(probe0:ahc0:0:0:0): Request Requeued
(probe0:ahc0:0:0:0): Retrying Command
(probe3:ahc0:0:3:0): Request Requeued
(probe3:ahc0:0:3:0): Retrying Command
(probe4:ahc0:0:4:0): Request Requeued
(probe4:ahc0:0:4:0): Retrying Command
(probe6:ahc0:0:6:0): Request Requeued
(probe6:ahc0:0:6:0): Retrying Command
(probe7:ahc0:0:7:0): Request Requeued
(probe7:ahc0:0:7:0): Retrying Command
(probe8:ahc0:0:8:0): Request Requeued
(probe8:ahc0:0:8:0): Retrying Command
(probe10:ahc0:0:10:0): Request Requeued
(probe10:ahc0:0:10:0): Retrying Command
(probe13:ahc0:0:13:0): Request Requeued
(probe13:ahc0:0:13:0): Retrying Command
(probe1:ahc0:0:1:0): Request Requeued
(probe1:ahc0:0:1:0): Retrying Command
(probe2:ahc0:0:2:0): Request Requeued
(probe2:ahc0:0:2:0): Retrying Command
(probe5:ahc0:0:5:0): Request Requeued
(probe5:ahc0:0:5:0): Retrying Command
(probe9:ahc0:0:9:0): Request Requeued
(probe9:ahc0:0:9:0): Retrying Command
(probe11:ahc0:0:11:0): Request Requeued
(probe11:ahc0:0:11:0): Retrying Command
(probe12:ahc0:0:12:0): Request Requeued
(probe12:ahc0:0:12:0): Retrying Command
(probe14:ahc0:0:14:0): Request Requeued
(probe14:ahc0:0:14:0): Retrying Command
ahc0: Recovery Initiated
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahc0: Dumping Card State while idle, at SEQADDR 0x17f
Card was paused
ACCUM = 0x0, SINDEX = 0x20, DINDEX = 0xa0, ARG_2 = 0x3
HCNT = 0x20 SCBPTR = 0x0
SCSISIGI[0x0] ERROR[0x40]:(PCIERRSTAT) SCSIBUSL[0x0]
LASTPHASE[0x1]:(P_BUSFREE) SCSISEQ[0x12]:(ENAUTOATNP|ENRSELI)
SBLKCTL[0x2]:(SELWIDE) SCSIRATE[0x0] SEQCTL[0x10]:(FASTMODE)
SEQ_FLAGS[0xc0]:(NO_CDB_SENT|NOT_IDENTIFIED) SSTAT0[0x4]:(SDONE)
SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] SIMODE0[0x0] SIMODE1[0xa4]:(ENSCSIPERR|ENSCS
IRST|ENSELTIMO)
SXFRCTL0[0x80]:(DFON) DFCNTRL[0xc]:(DIRECTION|HDMAEN)
DFSTATUS[0x71]:(FIFOEMP|MREQPEND|FIFOQWDEMP|DFCACHETH)
STACK: 0xe 0xe 0x0 0x174
SCB count = 20
Kernel NEXTQSCB = 9
Card NEXTQSCB = 14
QINFIFO entries: 14 15 16 17 18 19 0 1 2 3 4 5 6 7 8
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Sequencer SCB Info:
0 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
1 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
2 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
3 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
4 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
5 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
6 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
7 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
8 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
9 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
10 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
11 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
12 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
13 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
14 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
15 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
Pending list:
8 SCB_CONTROL[0x0] SCB_SCSIID[0xef]:(TWIN_CHNLB|OID) SCB_LUN[0x0]
7 SCB_CONTROL[0x0] SCB_SCSIID[0xcf]:(TWIN_CHNLB|OID) SCB_LUN[0x0]
6 SCB_CONTROL[0x0] SCB_SCSIID[0xbf]:(TWIN_CHNLB|OID) SCB_LUN[0x0]
5 SCB_CONTROL[0x0] SCB_SCSIID[0x9f]:(TWIN_CHNLB|OID) SCB_LUN[0x0]
4 SCB_CONTROL[0x0] SCB_SCSIID[0x5f]:(OID) SCB_LUN[0x0]
3 SCB_CONTROL[0x0] SCB_SCSIID[0x2f]:(OID) SCB_LUN[0x0]
2 SCB_CONTROL[0x0] SCB_SCSIID[0x1f]:(OID) SCB_LUN[0x0]
1 SCB_CONTROL[0x0] SCB_SCSIID[0xdf]:(TWIN_CHNLB|OID) SCB_LUN[0x0]
0 SCB_CONTROL[0x0] SCB_SCSIID[0xaf]:(TWIN_CHNLB|OID) SCB_LUN[0x0]
19 SCB_CONTROL[0x0] SCB_SCSIID[0x8f]:(TWIN_CHNLB|OID) SCB_LUN[0x0]
18 SCB_CONTROL[0x0] SCB_SCSIID[0x7f]:(OID|TWIN_TID) SCB_LUN[0x0]
17 SCB_CONTROL[0x0] SCB_SCSIID[0x6f]:(OID) SCB_LUN[0x0]
16 SCB_CONTROL[0x0] SCB_SCSIID[0x4f]:(OID) SCB_LUN[0x0]
15 SCB_CONTROL[0x0] SCB_SCSIID[0x3f]:(OID) SCB_LUN[0x0]
14 SCB_CONTROL[0x0] SCB_SCSIID[0xf]:(OID) SCB_LUN[0x0]
Kernel Free SCB list: 13 12 11 10
Untagged Q(0): 14
Untagged Q(1): 2
Untagged Q(2): 3
Untagged Q(3): 15
Untagged Q(4): 16
Untagged Q(5): 4
Untagged Q(6): 17
Untagged Q(7): 18
Untagged Q(8): 19
Untagged Q(9): 5
Untagged Q(10): 0
Untagged Q(11): 6
Untagged Q(12): 7
Untagged Q(13): 1
Untagged Q(14): 8
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
(probe10:ahc0:0:10:0): SCB 0x0 - timed out
sg[0] - Addr 0x7aee884 : Length 36
(probe10:ahc0:0:10:0): SCB 0: Immediate reset. Flags = 0x620
(probe10:ahc0:0:10:0): no longer in timeout, status = 25b
ahc0: Issued Channel A Bus Reset. 15 SCBs aborted
(probe0:ahc0:0:0:0): Request Requeued
(probe0:ahc0:0:0:0): Retrying Command
(probe3:ahc0:0:3:0): Request Requeued
(probe3:ahc0:0:3:0): Retrying Command
(probe4:ahc0:0:4:0): Request Requeued
(probe4:ahc0:0:4:0): Retrying Command
(probe6:ahc0:0:6:0): Request Requeued
(probe6:ahc0:0:6:0): Retrying Command
(probe7:ahc0:0:7:0): Request Requeued
(probe7:ahc0:0:7:0): Retrying Command
(probe8:ahc0:0:8:0): Request Requeued
(probe8:ahc0:0:8:0): Retrying Command
(probe10:ahc0:0:10:0): Request Requeued
(probe10:ahc0:0:10:0): Retrying Command
(probe13:ahc0:0:13:0): Request Requeued
(probe13:ahc0:0:13:0): Retrying Command
(probe1:ahc0:0:1:0): Request Requeued
(probe1:ahc0:0:1:0): Retrying Command
(probe2:ahc0:0:2:0): Request Requeued
(probe2:ahc0:0:2:0): Retrying Command
(probe5:ahc0:0:5:0): Request Requeued
(probe5:ahc0:0:5:0): Retrying Command
(probe9:ahc0:0:9:0): Request Requeued
(probe9:ahc0:0:9:0): Retrying Command
(probe11:ahc0:0:11:0): Request Requeued
(probe11:ahc0:0:11:0): Retrying Command
(probe12:ahc0:0:12:0): Request Requeued
(probe12:ahc0:0:12:0): Retrying Command
(probe14:ahc0:0:14:0): Request Requeued
(probe14:ahc0:0:14:0): Retrying Command
ahc0: Timedout SCBs already complete. Interrupts may not be functioning.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?f0d84caa05061509592c2be71d>