Date: Wed, 2 Apr 2003 15:51:43 -0800 (PST) From: Nate Lawson <nate@root.org> To: Juli Mallett <jmallett@FreeBSD.org> Cc: freebsd-current@FreeBSD.org Subject: Re: Odd issues with USB SmartMedia Reader/Writer (PNY) Message-ID: <Pine.BSF.4.21.0304021544340.12581-100000@root.org> In-Reply-To: <20030331193755.A60987@FreeBSD.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, 31 Mar 2003, Juli Mallett wrote: > I have a PNY USB SmartMedia reader which works excellently with 5.x > with 8M media, but which blows up with 32M media. I'd assume this is > due to improper geometry or something, but I really have no idea. > Insert-reinsert produces no change in results, etc. Below are bits > from dmesg, with the smaller then the larger. It's likely the 32M media is a different chipset than the 8M. Please see this page: http://www.root.org/~nate/freebsd/quirks.html Then read the quirks sections of the listed files to get an idea of how the quirks are used. > %%% --> With the 32M SmartMedia > umass0: Alcor Mass Storage Device, rev 1.10/1.00, addr 5 > umass0: Get Max Lun not supported (STALLED) > umass0:0:0:-1: Attached to scbus0 as device 0 > pass0 at umass-sim0 bus 0 target 0 lun 0 > pass0: <Generic USB SMC Reader 1.00> Removable Direct Access SCSI-0 device > pass0: 1.000MB/s transfers > GEOM: new disk da0 > (da0:umass-sim0:0:0:0): error 6 > (da0:umass-sim0:0:0:0): Unretryable Error I'd try a scsi_da.c quirk of DA_Q_NO_6_BYTE first. You can just use "Generic", "*", "*" to start with. -Nate
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0304021544340.12581-100000>