Date: Sun, 19 Jan 2003 00:18:58 +0100 (CET) From: Jeffrey Eugene Crawford <jeffrey.crawford@netcologne.de> To: FreeBSD-gnats-submit@FreeBSD.org Subject: kern/47200: USB port is disabled when Kodak DX4900 is attached Message-ID: <20030118231858.A40B04A8E@lissi.crawford.int>
next in thread | raw e-mail | index | archive | help
>Number: 47200
>Category: kern
>Synopsis: USB port is disabled when Kodak DX4900 is attached
>Confidential: no
>Severity: non-critical
>Priority: medium
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Sat Jan 18 15:20:01 PST 2003
>Closed-Date:
>Last-Modified:
>Originator: Jeffrey Eugene Crawford
>Release: FreeBSD 4.7-RELEASE-p3 i386
>Organization:
>Environment:
System: FreeBSD lissi.crawford.int 4.7-RELEASE-p3 FreeBSD 4.7-RELEASE-p3 #5: Sat Jan 11 23:54:53 CET 2003 toor@lissi.crawford.int:/usr/obj/usr/src/sys/LISSI i386
>Description:
When I try to attach my Kodak DX4900 digital camera to my USB port
integrated onto my motherboard, I get the following messages on my console:
usbd_new_device: addr=3, getting first desc failed
uhub_explore: usb_new_device failed, error=TIMEOUT
uhub0: device problem, disabling port 1
After removing the device I get
uhub0: port error, restarting port 1
After this has happened I noticed other devices that usually work being
attached to the same port no longer work until after a reboot. It seems that
this device really confuses the USB part of the system. Here is a dump from
dmesg:
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.7-RELEASE-p2 #0: Thu Dec 12 00:08:52 CET 2002
root@lissi.crawford.int:/usr/obj/usr/src/sys/LISSI
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 751709439 Hz
CPU: AMD Athlon(tm) Processor (751.71-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x622 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
AMD Features=0xc0400000<AMIE,DSP,3DNow!>
real memory = 805240832 (786368K bytes)
avail memory = 778235904 (759996K bytes)
Preloaded elf kernel "kernel" at 0xc04a5000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc04a509c.
Preloaded elf module "linux.ko" at 0xc04a50ec.
Preloaded elf module "agp.ko" at 0xc04a518c.
Preloaded elf module "nvidia.ko" at 0xc04a5228.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 7 entries at 0xc00fde40
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <VIA Generic host to PCI bridge> mem 0xd8000000-0xdbffffff at device 0.0 on pci0
pcib2: <PCI to PCI bridge (vendor=1106 device=8391)> at device 1.0 on pci0
pci1: <PCI bus> on pcib2
nvidia0: <GeForce2 MX/MX 400> mem 0xd0000000-0xd7ffffff,0xdc000000-0xdcffffff irq 5 at device 0.0 on pci1
isab0: <VIA 82C686 PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA66 controller> port 0xc000-0xc00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xc400-0xc41f irq 9 at device 7.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub0: device problem, disabling port 1
uhub0: device problem, disabling port 2
pci0: <unknown card> (vendor=0x1106, dev=0x3057) at 7.4
pcm0: <VIA VT82C686A> port 0xd400-0xd403,0xd000-0xd003,0xcc00-0xccff irq 10 at device 7.5 on pci0
atapci1: <Promise TX2 ATA133 controller> port 0xe800-0xe80f,0xe400-0xe403,0xe000-0xe007,0xdc00-0xdc03,0xd800-0xd807 mem 0xdf000000-0xdf003fff irq 11 at device 9.0 on pci0
ata2: at 0xd800 on atapci1
ata3: at 0xe000 on atapci1
rl0: <RealTek 8139 10/100BaseTX> port 0xec00-0xecff mem 0xdf004000-0xdf0040ff irq 10 at device 10.0 on pci0
rl0: Ethernet address: 00:30:84:40:ff:fa
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib1: <Host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib1
orm0: <Option ROMs> at iomem 0xc0000-0xcc7ff,0xd0000-0xd27ff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x2 irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ipfw2 initialized, divert disabled, rule-based forwarding enabled, default to deny, logging unlimited
ad4: 57259MB <MAXTOR 6L060J3> [116336/16/63] at ata2-master UDMA133
ad6: DMA limited to UDMA33, non-ATA66 cable or device
ad6: 14648MB <Maxtor 91536U6> [29762/16/63] at ata3-master UDMA33
ad7: 8047MB <Maxtor 88401D8> [16351/16/63] at ata3-slave UDMA33
acd0: CD-RW <LITE-ON LTR-48246S> at ata0-master PIO4
acd1: DVD-ROM <CREATIVEDVD5240E-1> at ata0-slave PIO4
Mounting root from ufs:/dev/ad6s1a
>How-To-Repeat:
Attach a Kodak DX4900 device to the USB port
>Fix:
>Release-Note:
>Audit-Trail:
>Unformatted:
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030118231858.A40B04A8E>