Date: Fri, 22 Jan 2010 08:02:23 +0000 From: "N.J. Mann" <njm@njm.me.uk> To: Marin Atanasov <dnaeon@gmail.com> Cc: Ronald Klop <ronald-freebsd8@klop.yi.org>, freebsd-stable@freebsd.org, Jeremy Chadwick <freebsd@jdc.parodius.com>, freebsd-hardware@freebsd.org Subject: Re: Multiple serial consoles via null modem cable Message-ID: <20100122080223.GA6681@titania.njm.me.uk> In-Reply-To: <717f7a3e1001210137p7884adcbxc66a4f7fff928821@mail.gmail.com> References: <717f7a3e1001120714m37aada69gfaa35f0f9b17f435@mail.gmail.com> <44678539@bb.ipt.ru> <717f7a3e1001142234y1de7ae15x6853e3ddcab4add9@mail.gmail.com> <op.u6oij7dz8527sy@212-123-145-58.ip.telfort.nl> <717f7a3e1001192246o4dce4a82q57c05ff3f41b5feb@mail.gmail.com> <20100120074611.GA405@icarus.home.lan> <717f7a3e1001210137p7884adcbxc66a4f7fff928821@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
In message <717f7a3e1001210137p7884adcbxc66a4f7fff928821@mail.gmail.com>,
Marin Atanasov (dnaeon@gmail.com) wrote:
> Hello Jeremy,
>
> Now I'm a little confused :)
>
> I've made some tests with my machines and a couple of null modem cables, and
> here's what I've got.
>
> On Wed, Jan 20, 2010 at 9:46 AM, Jeremy Chadwick
> <freebsd@jdc.parodius.com>wrote:
>
> > On Wed, Jan 20, 2010 at 08:46:48AM +0200, Marin Atanasov wrote:
> > > Hello,
> > >
> > > Using `cu' only works with COM1 for me.
> > >
> > > Currently I have two serial ports on the system, and only the first is
> > able
> > > to make the connection - the serial consoles are enabled in /etc/tty, but
> > as
> > > I said only COM1 is able to make the connection.
> >
> > I'm a little confused by this statement, so I'll add some clarify:
> >
> > /etc/ttys is for configuring a machine to tie getty (think login prompt)
> > to a device (in this case, a serial port). Meaning: the device on the
> > other end of the serial cable will start seeing "login:" and so on
> > assuming you attach to the serial port there.
> >
> > For example:
> >
> > box1 COM1/ttyu0 is wired to box2 COM3/ttyu2 using a null modem cable.
> > box1 COM2/ttyu1 is wired to box2 COM4/ttyu3 using a null modem cable.
> >
> > On box1, you'd have something like this in /etc/ttys:
> >
> > ttyu0 "/usr/libexec/getty std.9600" vt100 on secure
> > ttyu1 "/usr/libexec/getty std.9600" vt100 on secure
> >
>
> Here's what I did:
>
> box1 COM1/ttyd0 -> box2 COM1/ttyd0 -> using null modem cable
> box1 COM2/ttyd1 -> box3 COM1/ttyd0 -> using null modem cable
>
> On box1 I have this in /etc/ttys:
>
> ttyd0 "/usr/libexec/getty std.9600" vt100 on secure
> ttyd1 "/usr/libexec/getty std.9600" vt100 on secure
>
> Now if I want to connect to box1 from box2 or box3 through the serial
> connection it should work, right?
> But I only can connect to box1 from box2, because box2's COM port is
> connected to box1's COM1 port.
>
> >From box2 I can get a login prompt
> box2# cu -l /dev/cuad0 -s 9600
> Connected
>
> login:
> )
> (host.domain) (ttyd0)
>
> login: ~
> [EOT]
>
> But if I try to connect to box1 from box3 - no success there.
> box3# cu -l /dev/cuad0 -s 9600
> Connected
> ~
> [EOT]
You need to reduce the number of unknowns, e.g. where is the problem:
box1, box3 or in between. So, swap the cables on box1 so that you now
have box1:COM1 -> box3:COM1 and box1:COM2 -> box2:COM1. Now repeat the
tests above and post your results.
Cheers,
Nick.
--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20100122080223.GA6681>