Date: Mon, 13 Feb 2006 13:33:56 +0100 From: Julien Ammous <julien.ammous@supinfo.com> To: freebsd-stable@freebsd.org Subject: FreeBSD6 freeze at boot Message-ID: <43F07CB4.1090207@supinfo.com>
next in thread | raw e-mail | index | archive | help
Hi, I use freebsd 6 on my main router without problems since it was released by i am actually working on an embedded system, i built the minimal system without much problems it now works well but the problem here is that sometime it will just freze while booting and wait there for a random time, and sometime it never unfreeze, I don't know if it can help but here is the output of 'dmesg' : real memory = 528416768 (503 MB) avail memory = 507764736 (484 MB) npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface cpu0 on motherboard pcib0: <Host to PCI bridge> pcibus 0 on motherboard pir0: <PCI Interrupt Routing Table: 7 Entries> on motherboard $PIR: BIOS IRQ 5 for 0.7.INTC does not match link 0x5 irq 11 $PIR: BIOS IRQ 11 for 0.7.INTD does not match link 0x1 irq 12 pci0: <PCI bus> on pcib0 agp0: <VIA 8601 (Apollo ProMedia/PLE133Ta) host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 82C686B UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xc000-0xc00f at device 7.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 uhci0: <VIA 83C572 USB controller> port 0xc400-0xc41f irq 11 at device 7.2 on pci0 uhci0: [GIANT-LOCKED] usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <VIA 83C572 USB controller> port 0xc800-0xc81f irq 11 at device 7.3 on pci0 uhci1: [GIANT-LOCKED] usb1: <VIA 83C572 USB controller> on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered pci0: <bridge> at device 7.4 (no driver attached) pci0: <multimedia, audio> at device 7.5 (no driver attached) rl0: <RealTek 8139 10/100BaseTX> port 0xd800-0xd8ff mem 0xe5810000-0xe58100ff irq 12 at device 8.0 on pci0 miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: Ethernet address: 00:40:f4:b8:f4:9e rl1: <RealTek 8139 10/100BaseTX> port 0xdc00-0xdcff mem 0xe5811000-0xe58110ff irq 10 at device 9.0 on pci0 miibus1: <MII bus> on rl1 rlphy1: <RealTek internal media interface> on miibus1 rlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl1: Ethernet address: 00:40:f4:b8:f4:9d rl2: <RealTek 8139 10/100BaseTX> port 0xe000-0xe0ff mem 0xe5812000-0xe58120ff irq 11 at device 11.0 on pci0 miibus2: <MII bus> on rl2 rlphy2: <RealTek internal media interface> on miibus2 rlphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl2: Ethernet address: 00:40:f4:b8:f4:9c pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xcbfff,0xcc000-0xcffff,0xd0000-0xda7ff,0xdb000-0xe57ff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: [FAST] ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 unknown: <PNP0303> can't assign resources (port) unknown: <PNP0c01> can't assign resources (memory) unknown: <PNP0c02> can't assign resources (memory) unknown: <PNP0700> can't assign resources (port) unknown: <PNP0501> can't assign resources (port) unknown: <PNP0501> can't assign resources (port) unknown: <PNP0400> can't assign resources (port) Timecounter "TSC" frequency 998701672 Hz quality 800 Timecounters tick every 1.000 msec ad2: 976MB <Transcend 1G02 1.1> at ata1-master PIO4 Trying to mount root from nfs:192.168.0.1:/usr/jails/neo NFS ROOT: 192.168.0.1:/usr/jails/neo speaker0: <PC speaker> at port 0x61 on isa0 This system is booted with a remote disk via nfs but the same problem happen when i boot from a local disk (compact flash). The freeze happens after this line: npx0: [FAST] With my understanding of this, it seems it have something against the math processor or something near since it is the line following this one. I really hope someone can help me, I don't really want to have to drop freebsd for another system for this system. Ps: The kernel is GENERIC, I wait until everything works before recompiling a new one. I know there are some warnings but they happen after my freeze problem so i don't think they are related, and the system works well after booting (when it boots).
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?43F07CB4.1090207>