Date: Thu, 13 Dec 2012 16:04:33 -0500 From: Johannes Dieterich <dieterich.joh@gmail.com> To: George Liaskos <geo.liaskos@gmail.com> Cc: Artyom Mirgorodskiy <artyom@ijminteractive.net>, freebsd-current <freebsd-current@freebsd.org> Subject: Re: new xorg segfault 11 with KMS Message-ID: <CABquGzVZzpi-6Ni3dkZ00N3js9ZnEuojCN87UV=adOD7Pp1=7A@mail.gmail.com> In-Reply-To: <CANcjpOD1G9O-x6Avm3RvRFO4BA1NTuZqpmhfutb4szhRO8WbvA@mail.gmail.com> References: <CABquGzXefGp%2BD0qmaAboYQSGip-4A3XwQUT7M%2BMfVqSZjQ6i9Q@mail.gmail.com> <2279995.En67FjFeZ3@home.alkar.net> <CANcjpOD1G9O-x6Avm3RvRFO4BA1NTuZqpmhfutb4szhRO8WbvA@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, Dec 13, 2012 at 4:01 PM, George Liaskos <geo.liaskos@gmail.com> wro= te: > > Rebuilding xorg-server with gcc resolves the problem, bt points at libdrm= 2. So basically this is a regression from the previous clang3.1 to the clang3.2 import then? Is anyone of the clang guys aware of this? > On Thu, Dec 13, 2012 at 10:51 PM, Artyom Mirgorodskiy <artyom@ijminteract= ive.net> wrote: >> >> I have a similar problem when running firefox >> >> On Thursday 13 December 2012 15:49:38 Johannes Dieterich wrote: >> > Dear all, >> > >> > I lately see xorg segfault 11s with CURRENT, WITH_NEW_XORG=3Dyes and >> > WITH_KMS=3Dyes. Interestingly, gdm loads fine but xfce4 at login direc= tly >> > causes the segfault (log attached), gnome survives a bit longer but >> > starting any bigger application (e.g. firefox) causes it to crash with= the >> > same log. >> > >> > I have a Xorg.core file, but since it is without debug symbols the >> > backtrace makes little sense to me. >> > >> > Unfortunately, I cannot tell what is the root cause of the problems as= I >> > first got bitten by the pcre update and also did the world update to t= he >> > clang3.2 import. Needless to say that everything worked prior and the >> > configuration (no xorg.conf here) did not change. >> > >> > uname -a: >> > FreeBSD XXXXX 10.0-CURRENT FreeBSD 10.0-CURRENT #6 r244180: Thu Dec 13 >> > 09:46:06 EST 2012 root@XXXXX:/usr/obj/usr/src/sys/GENERIC amd64. >> > >> > Xorg.0.log: >> > [ 88.021] >> > X.Org X Server 1.10.6 >> > Release Date: 2012-02-10 >> > [ 88.021] X Protocol Version 11, Revision 0 >> > [ 88.021] Build Operating System: FreeBSD 10.0-CURRENT amd64 >> > [ 88.021] Current Operating System: FreeBSD XXXXXXXXX 10.0-CURRENT >> > FreeBSD 10.0-CURRENT #6 r244180: Thu Dec 13 09:46:06 EST 2012 >> > root@XXXXXXX:/usr/obj/usr/src/sys/GENERIC amd64 >> > [ 88.021] Build Date: 13 December 2012 06:30:07AM >> > [ 88.021] >> > [ 88.021] Current version of pixman: 0.24.2 >> > [ 88.021] Before reporting problems, check http://wiki.x.org >> > to make sure that you have the latest version. >> > [ 88.021] Markers: (--) probed, (**) from config file, (=3D=3D) def= ault >> > setting, >> > (++) from command line, (!!) notice, (II) informational, >> > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. >> > [ 88.022] (=3D=3D) Log file: "/var/log/Xorg.0.log", Time: Thu Dec 1= 3 >> > 15:01:42 2012 >> > [ 88.024] (II) Loader magic: 0x7c1930 >> > [ 88.024] (II) Module ABI versions: >> > [ 88.024] X.Org ANSI C Emulation: 0.4 >> > [ 88.024] X.Org Video Driver: 10.0 >> > [ 88.024] X.Org XInput driver : 12.2 >> > [ 88.024] X.Org Server Extension : 5.0 >> > [ 88.025] (--) PCI:*(0:0:2:0) 8086:0166:17aa:2200 rev 9, Mem @ >> > 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00005000/64, BIOS @ >> > 0x????????/65536 >> > [ 88.025] (=3D=3D) Using default built-in configuration (30 lines) >> > [ 88.025] (=3D=3D) --- Start of built-in configuration --- >> > [ 88.025] Section "Device" >> > [ 88.025] Identifier "Builtin Default intel Device = 0" >> > [ 88.025] Driver "intel" >> > [ 88.025] EndSection >> > [ 88.025] Section "Screen" >> > [ 88.025] Identifier "Builtin Default intel Screen = 0" >> > [ 88.025] Device "Builtin Default intel Device 0" >> > [ 88.025] EndSection >> > [ 88.025] Section "Device" >> > [ 88.025] Identifier "Builtin Default vesa Device 0= " >> > [ 88.025] Driver "vesa" >> > [ 88.025] EndSection >> > [ 88.025] Section "Screen" >> > [ 88.025] Identifier "Builtin Default vesa Screen 0= " >> > [ 88.025] Device "Builtin Default vesa Device 0" >> > [ 88.025] EndSection >> > [ 88.025] Section "Device" >> > [ 88.025] Identifier "Builtin Default fbdev Device = 0" >> > [ 88.025] Driver "fbdev" >> > [ 88.025] EndSection >> > [ 88.025] Section "Screen" >> > [ 88.025] Identifier "Builtin Default fbdev Screen = 0" >> > [ 88.025] Device "Builtin Default fbdev Device 0" >> > [ 88.026] EndSection >> > [ 88.026] Section "ServerLayout" >> > [ 88.026] Identifier "Builtin Default Layout" >> > [ 88.026] Screen "Builtin Default intel Screen 0" >> > [ 88.026] Screen "Builtin Default vesa Screen 0" >> > [ 88.026] Screen "Builtin Default fbdev Screen 0" >> > [ 88.026] EndSection >> > [ 88.026] (=3D=3D) --- End of built-in configuration --- >> > [ 88.026] (=3D=3D) ServerLayout "Builtin Default Layout" >> > [ 88.026] (**) |-->Screen "Builtin Default intel Screen 0" (0) >> > [ 88.026] (**) | |-->Monitor "<default monitor>" >> > [ 88.026] (**) | |-->Device "Builtin Default intel Device 0" >> > [ 88.026] (=3D=3D) No monitor specified for screen "Builtin Default= intel >> > Screen 0". >> > Using a default monitor configuration. >> > [ 88.026] (**) |-->Screen "Builtin Default vesa Screen 0" (1) >> > [ 88.026] (**) | |-->Monitor "<default monitor>" >> > [ 88.026] (**) | |-->Device "Builtin Default vesa Device 0" >> > [ 88.026] (=3D=3D) No monitor specified for screen "Builtin Default= vesa >> > Screen 0". >> > Using a default monitor configuration. >> > [ 88.026] (**) |-->Screen "Builtin Default fbdev Screen 0" (2) >> > [ 88.027] (**) | |-->Monitor "<default monitor>" >> > [ 88.027] (**) | |-->Device "Builtin Default fbdev Device 0" >> > [ 88.027] (=3D=3D) No monitor specified for screen "Builtin Default= fbdev >> > Screen 0". >> > Using a default monitor configuration. >> > [ 88.027] (=3D=3D) Automatically adding devices >> > [ 88.027] (=3D=3D) Automatically enabling devices >> > [ 88.027] (WW) The directory "/usr/local/lib/X11/fonts/misc/" does = not >> > exist. >> > [ 88.027] Entry deleted from font path. >> > [ 88.028] (WW) The directory "/usr/local/lib/X11/fonts/Type1/" does= not >> > exist. >> > [ 88.029] Entry deleted from font path. >> > [ 88.029] (WW) The directory "/usr/local/lib/X11/fonts/100dpi/" doe= s not >> > exist. >> > [ 88.029] Entry deleted from font path. >> > [ 88.029] (WW) The directory "/usr/local/lib/X11/fonts/75dpi/" does= not >> > exist. >> > [ 88.029] Entry deleted from font path. >> > [ 88.029] (=3D=3D) FontPath set to: >> > /usr/local/lib/X11/fonts/TTF/, >> > /usr/local/lib/X11/fonts/OTF/ >> > [ 88.029] (=3D=3D) ModulePath set to "/usr/local/lib/xorg/modules" >> > [ 88.029] (II) The server relies on HAL to provide the list of inpu= t >> > devices. >> > If no devices become available, reconfigure HAL or disable >> > AutoAddDevices. >> > [ 88.029] (II) LoadModule: "extmod" >> > [ 88.032] (II) Loading >> > /usr/local/lib/xorg/modules/extensions/libextmod.so >> > [ 88.033] (II) Module extmod: vendor=3D"X.Org Foundation" >> > [ 88.033] compiled for 1.10.6, module version =3D 1.0.0 >> > [ 88.033] Module class: X.Org Server Extension >> > [ 88.033] ABI class: X.Org Server Extension, version 5.0 >> > [ 88.033] (II) Loading extension MIT-SCREEN-SAVER >> > [ 88.033] (II) Loading extension XFree86-VidModeExtension >> > [ 88.033] (II) Loading extension XFree86-DGA >> > [ 88.033] (II) Loading extension DPMS >> > [ 88.034] (II) Loading extension XVideo >> > [ 88.034] (II) Loading extension XVideo-MotionCompensation >> > [ 88.034] (II) Loading extension X-Resource >> > [ 88.034] (II) LoadModule: "dbe" >> > [ 88.034] (II) Loading /usr/local/lib/xorg/modules/extensions/libdb= e.so >> > [ 88.035] (II) Module dbe: vendor=3D"X.Org Foundation" >> > [ 88.035] compiled for 1.10.6, module version =3D 1.0.0 >> > [ 88.035] Module class: X.Org Server Extension >> > [ 88.035] ABI class: X.Org Server Extension, version 5.0 >> > [ 88.035] (II) Loading extension DOUBLE-BUFFER >> > [ 88.035] (II) LoadModule: "glx" >> > [ 88.035] (II) Loading /usr/local/lib/xorg/modules/extensions/libgl= x.so >> > [ 88.040] (II) Module glx: vendor=3D"X.Org Foundation" >> > [ 88.040] compiled for 1.10.6, module version =3D 1.0.0 >> > [ 88.040] ABI class: X.Org Server Extension, version 5.0 >> > [ 88.041] (=3D=3D) AIGLX disabled >> > [ 88.041] (II) Loading extension GLX >> > [ 88.041] (II) LoadModule: "record" >> > [ 88.042] (II) Loading >> > /usr/local/lib/xorg/modules/extensions/librecord.so >> > [ 88.043] (II) Module record: vendor=3D"X.Org Foundation" >> > [ 88.043] compiled for 1.10.6, module version =3D 1.13.0 >> > [ 88.043] Module class: X.Org Server Extension >> > [ 88.043] ABI class: X.Org Server Extension, version 5.0 >> > [ 88.043] (II) Loading extension RECORD >> > [ 88.043] (II) LoadModule: "dri" >> > [ 88.043] (II) Loading /usr/local/lib/xorg/modules/extensions/libdr= i.so >> > [ 88.045] (II) Module dri: vendor=3D"X.Org Foundation" >> > [ 88.045] compiled for 1.10.6, module version =3D 1.0.0 >> > [ 88.045] ABI class: X.Org Server Extension, version 5.0 >> > [ 88.045] (II) Loading extension XFree86-DRI >> > [ 88.046] (II) LoadModule: "dri2" >> > [ 88.046] (II) Loading /usr/local/lib/xorg/modules/extensions/libdr= i2.so >> > [ 88.047] (II) Module dri2: vendor=3D"X.Org Foundation" >> > [ 88.047] compiled for 1.10.6, module version =3D 1.2.0 >> > [ 88.047] ABI class: X.Org Server Extension, version 5.0 >> > [ 88.047] (II) Loading extension DRI2 >> > [ 88.047] (II) LoadModule: "intel" >> > [ 88.047] (II) Loading /usr/local/lib/xorg/modules/drivers/intel_dr= v.so >> > [ 88.053] (II) Module intel: vendor=3D"X.Org Foundation" >> > [ 88.053] compiled for 1.10.6, module version =3D 2.17.0 >> > [ 88.053] Module class: X.Org Video Driver >> > [ 88.053] ABI class: X.Org Video Driver, version 10.0 >> > [ 88.053] (II) LoadModule: "vesa" >> > [ 88.053] (II) Loading /usr/local/lib/xorg/modules/drivers/vesa_drv= .so >> > [ 88.054] (II) Module vesa: vendor=3D"X.Org Foundation" >> > [ 88.054] compiled for 1.10.6, module version =3D 2.3.0 >> > [ 88.054] Module class: X.Org Video Driver >> > [ 88.054] ABI class: X.Org Video Driver, version 10.0 >> > [ 88.054] (II) LoadModule: "fbdev" >> > [ 88.057] (WW) Warning, couldn't open module fbdev >> > [ 88.057] (II) UnloadModule: "fbdev" >> > [ 88.057] (II) Unloading fbdev >> > [ 88.057] (EE) Failed to load module "fbdev" (module does not exist= , 0) >> > [ 88.057] (II) intel: Driver for Intel Integrated Graphics Chipsets= : >> > i810, >> > i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, = 915G, >> > E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pinevie= w G, >> > 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45= , >> > 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandal= e, >> > Sandybridge Desktop (GT1), Sandybridge Desktop (GT2), >> > Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1), >> > Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+), >> > Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (= GT2), >> > Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Se= rver >> > [ 88.060] (II) VESA: driver for VESA chipsets: vesa >> > [ 88.060] (--) Using syscons driver with X support (version 2.0) >> > [ 88.060] (--) using VT number 9 >> > >> > [ 88.062] (II) Loading /usr/local/lib/xorg/modules/drivers/intel_dr= v.so >> > [ 88.062] (WW) Falling back to old probe method for vesa >> > [ 88.062] (WW) VGA arbiter: cannot open kernel arbiter, no multi-ca= rd >> > support >> > [ 88.062] drmOpenDevice: node name is /dev/dri/card0 >> > [ 88.062] Failed to change owner or group for file /dev/dri! 2: No = such >> > file or directory >> > [ 88.062] Failed to change owner or group for file /dev/dri/card0! = 2: No >> > such file or directory >> > [ 88.062] drmOpenDevice: open result is -1, (No such file or direct= ory) >> > [ 88.062] Failed to change owner or group for file /dev/dri/card0! = 2: No >> > such file or directory >> > [ 88.062] drmOpenDevice: open result is -1, (No such file or direct= ory) >> > [ 88.062] drmOpenDevice: Open failed >> > [ 89.135] drmOpenByBusid: Searching for BusID pci:0000:00:02.0 >> > [ 89.135] drmOpenDevice: node name is /dev/dri/card0 >> > [ 89.135] drmOpenDevice: open result is 8, (OK) >> > [ 89.135] drmOpenByBusid: drmOpenMinor returns 8 >> > [ 89.135] drmOpenByBusid: Interface 1.4 failed, trying 1.1 >> > [ 89.135] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 >> > [ 89.135] (II) intel(0): Creating default Display subsection in Scr= een >> > section >> > "Builtin Default intel Screen 0" for depth/fbbpp 24/32 >> > [ 89.135] (=3D=3D) intel(0): Depth 24, (--) framebuffer bpp 32 >> > [ 89.135] (=3D=3D) intel(0): RGB weight 888 >> > [ 89.135] (=3D=3D) intel(0): Default visual is TrueColor >> > [ 89.135] (II) intel(0): Integrated Graphics Chipset: Intel(R) Ivyb= ridge >> > Mobile (GT2) >> > [ 89.135] (--) intel(0): Chipset: "Ivybridge Mobile (GT2)" >> > [ 89.135] (**) intel(0): Relaxed fencing enabled >> > [ 89.135] (**) intel(0): Wait on SwapBuffers? enabled >> > [ 89.135] (**) intel(0): Triple buffering? enabled >> > [ 89.135] (**) intel(0): Framebuffer tiled >> > [ 89.135] (**) intel(0): Pixmaps tiled >> > [ 89.135] (**) intel(0): 3D buffers tiled >> > [ 89.135] (**) intel(0): SwapBuffers wait enabled >> > [ 89.136] (=3D=3D) intel(0): video overlay key set to 0x101fe >> > [ 89.136] (II) intel(0): Output LVDS1 has no monitor section >> > [ 89.136] (II) intel(0): Output VGA1 has no monitor section >> > [ 89.350] (II) intel(0): Output HDMI1 has no monitor section >> > [ 89.368] (II) intel(0): Output DP1 has no monitor section >> > [ 89.378] (II) intel(0): Output HDMI2 has no monitor section >> > [ 89.387] (II) intel(0): Output HDMI3 has no monitor section >> > [ 89.405] (II) intel(0): Output DP2 has no monitor section >> > [ 89.423] (II) intel(0): Output DP3 has no monitor section >> > [ 89.423] (II) intel(0): EDID for output LVDS1 >> > [ 89.423] (II) intel(0): Manufacturer: SEC Model: 324c Serial#: 0 >> > [ 89.423] (II) intel(0): Year: 2010 Week: 0 >> > [ 89.423] (II) intel(0): EDID Version: 1.3 >> > [ 89.423] (II) intel(0): Digital Display Input >> > [ 89.423] (II) intel(0): Max Image Size [cm]: horiz.: 31 vert.: 17 >> > [ 89.423] (II) intel(0): Gamma: 2.20 >> > [ 89.424] (II) intel(0): DPMS capabilities: StandBy Suspend Off >> > [ 89.424] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb >> > 4:4:4 >> > [ 89.424] (II) intel(0): First detailed timing is preferred mode >> > [ 89.424] (II) intel(0): redX: 0.566 redY: 0.337 greenX: 0.351 gr= eenY: >> > 0.560 >> > [ 89.424] (II) intel(0): blueX: 0.150 blueY: 0.094 whiteX: 0.313 >> > whiteY: 0.329 >> > [ 89.424] (II) intel(0): Manufacturer's mask: 0 >> > [ 89.424] (II) intel(0): Supported detailed timing: >> > [ 89.424] (II) intel(0): clock: 98.2 MHz Image Size: 310 x 174 m= m >> > [ 89.424] (II) intel(0): h_active: 1600 h_sync: 1648 h_sync_end 1= 680 >> > h_blank_end 1760 h_border: 0 >> > [ 89.424] (II) intel(0): v_active: 900 v_sync: 902 v_sync_end 907 >> > v_blanking: 930 v_border: 0 >> > [ 89.424] (II) intel(0): Unknown vendor-specific block f >> > [ 89.424] (II) intel(0): SAMSUNG >> > [ 89.424] (II) intel(0): LTN140KT03401 >> > [ 89.424] (II) intel(0): EDID (in hex): >> > [ 89.424] (II) intel(0): 00ffffffffffff004ca34c3200000000 >> > [ 89.424] (II) intel(0): 00140103801f1178ea1d859156598f26 >> > [ 89.424] (II) intel(0): 18505400000001010101010101010101 >> > [ 89.424] (II) intel(0): 0101010101015d2640a060841e303020 >> > [ 89.424] (II) intel(0): 250036ae100000190000000f00000000 >> > [ 89.425] (II) intel(0): 000000000032c8043200000000fe0053 >> > [ 89.425] (II) intel(0): 414d53554e470a204ca34b54000000fe >> > [ 89.425] (II) intel(0): 004c544e3134304b54303334303100ca >> > [ 89.425] (II) intel(0): EDID vendor "SEC", prod id 12876 >> > [ 89.425] (II) intel(0): Printing DDC gathered Modelines: >> > [ 89.425] (II) intel(0): Modeline "1600x900"x0.0 98.21 1600 1648= 1680 >> > 1760 900 902 907 930 -hsync -vsync (55.8 kHz) >> > [ 89.425] (II) intel(0): Not using default mode "320x240" (doublesc= an >> > mode not supported) >> > [ 89.425] (II) intel(0): Not using default mode "400x300" (doublesc= an >> > mode not supported) >> > [ 89.425] (II) intel(0): Not using default mode "400x300" (doublesc= an >> > mode not supported) >> > [ 89.425] (II) intel(0): Not using default mode "512x384" (doublesc= an >> > mode not supported) >> > [ 89.425] (II) intel(0): Not using default mode "640x480" (doublesc= an >> > mode not supported) >> > [ 89.425] (II) intel(0): Not using default mode "640x512" (doublesc= an >> > mode not supported) >> > [ 89.425] (II) intel(0): Not using default mode "800x600" (doublesc= an >> > mode not supported) >> > [ 89.425] (II) intel(0): Not using default mode "896x672" (doublesc= an >> > mode not supported) >> > [ 89.425] (II) intel(0): Not using default mode "928x696" (doublesc= an >> > mode not supported) >> > [ 89.425] (II) intel(0): Not using default mode "960x720" (doublesc= an >> > mode not supported) >> > [ 89.425] (II) intel(0): Not using default mode "700x525" (doublesc= an >> > mode not supported) >> > [ 89.425] (II) intel(0): Not using default mode "1024x768" (doubles= can >> > mode not supported) >> > [ 89.425] (II) intel(0): Printing probed modes for output LVDS1 >> > [ 89.425] (II) intel(0): Modeline "1600x900"x60.0 98.21 1600 164= 8 >> > 1680 1760 900 902 907 930 -hsync -vsync (55.8 kHz) >> > [ 89.425] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 104= 8 >> > 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) >> > [ 89.426] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 9= 68 >> > 1056 600 601 605 628 +hsync +vsync (37.9 kHz) >> > [ 89.426] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 8= 96 >> > 1024 600 601 603 625 +hsync +vsync (35.2 kHz) >> > [ 89.426] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 7= 52 >> > 800 480 490 492 525 -hsync -vsync (31.5 kHz) >> > [ 89.426] (II) intel(0): EDID for output VGA1 >> > [ 89.632] (II) intel(0): EDID for output HDMI1 >> > [ 89.650] (II) intel(0): EDID for output DP1 >> > [ 89.660] (II) intel(0): EDID for output HDMI2 >> > [ 89.669] (II) intel(0): EDID for output HDMI3 >> > [ 89.687] (II) intel(0): EDID for output DP2 >> > [ 89.705] (II) intel(0): EDID for output DP3 >> > [ 89.705] (II) intel(0): Output LVDS1 connected >> > [ 89.705] (II) intel(0): Output VGA1 disconnected >> > [ 89.705] (II) intel(0): Output HDMI1 disconnected >> > [ 89.705] (II) intel(0): Output DP1 disconnected >> > [ 89.705] (II) intel(0): Output HDMI2 disconnected >> > [ 89.705] (II) intel(0): Output HDMI3 disconnected >> > [ 89.705] (II) intel(0): Output DP2 disconnected >> > [ 89.705] (II) intel(0): Output DP3 disconnected >> > [ 89.705] (II) intel(0): Using exact sizes for initial modes >> > [ 89.705] (II) intel(0): Output LVDS1 using initial mode 1600x900 >> > [ 89.706] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unl= ess >> > otherwise stated. >> > [ 89.706] (II) intel(0): Kernel page flipping support detected, ena= bling >> > [ 89.706] (**) intel(0): Display dimensions: (310, 170) mm >> > [ 89.706] (**) intel(0): DPI set to (131, 134) >> > [ 89.706] (II) Loading sub module "fb" >> > [ 89.706] (II) LoadModule: "fb" >> > [ 89.707] (II) Loading /usr/local/lib/xorg/modules/libfb.so >> > [ 89.709] (II) Module fb: vendor=3D"X.Org Foundation" >> > [ 89.709] compiled for 1.10.6, module version =3D 1.0.0 >> > [ 89.709] ABI class: X.Org ANSI C Emulation, version 0.4 >> > [ 89.709] (II) Loading sub module "dri2" >> > [ 89.709] (II) LoadModule: "dri2" >> > [ 89.709] (II) Loading /usr/local/lib/xorg/modules/extensions/libdr= i2.so >> > [ 89.710] (II) Module dri2: vendor=3D"X.Org Foundation" >> > [ 89.710] compiled for 1.10.6, module version =3D 1.2.0 >> > [ 89.710] ABI class: X.Org Server Extension, version 5.0 >> > [ 89.710] (II) UnloadModule: "vesa" >> > [ 89.710] (II) Unloading vesa >> > [ 89.710] (=3D=3D) Depth 24 pixmap format is 32 bpp >> > [ 89.710] (II) intel(0): [DRI2] Setup complete >> > [ 89.710] (II) intel(0): [DRI2] DRI driver: i965 >> > [ 89.710] (II) intel(0): Allocated new frame buffer 1600x900 stride >> > 6656, tiled >> > [ 89.716] (II) UXA(0): Driver registered support for the following >> > operations: >> > [ 89.716] (II) solid >> > [ 89.716] (II) copy >> > [ 89.716] (II) composite (RENDER acceleration) >> > [ 89.716] (II) put_image >> > [ 89.716] (II) get_image >> > [ 89.716] (=3D=3D) intel(0): Backing store disabled >> > [ 89.716] (=3D=3D) intel(0): Silken mouse enabled >> > [ 89.716] (II) intel(0): Initializing HW Cursor >> > [ 89.873] (II) intel(0): RandR 1.2 enabled, ignore the following Ra= ndR >> > disabled message. >> > [ 89.873] (=3D=3D) intel(0): DPMS enabled >> > [ 89.873] (=3D=3D) intel(0): Intel XvMC decoder enabled >> > [ 89.873] (II) intel(0): Set up textured video >> > [ 89.874] (II) intel(0): [XvMC] xvmc_vld driver initialized. >> > [ 89.874] (II) intel(0): direct rendering: DRI2 Enabled >> > [ 89.874] (--) RandR disabled >> > [ 89.874] (II) Initializing built-in extension Generic Event Extens= ion >> > [ 89.874] (II) Initializing built-in extension SHAPE >> > [ 89.874] (II) Initializing built-in extension MIT-SHM >> > [ 89.874] (II) Initializing built-in extension XInputExtension >> > [ 89.874] (II) Initializing built-in extension XTEST >> > [ 89.874] (II) Initializing built-in extension BIG-REQUESTS >> > [ 89.874] (II) Initializing built-in extension SYNC >> > [ 89.874] (II) Initializing built-in extension XKEYBOARD >> > [ 89.874] (II) Initializing built-in extension XC-MISC >> > [ 89.874] (II) Initializing built-in extension XINERAMA >> > [ 89.874] (II) Initializing built-in extension XFIXES >> > [ 89.874] (II) Initializing built-in extension RENDER >> > [ 89.874] (II) Initializing built-in extension RANDR >> > [ 89.874] (II) Initializing built-in extension COMPOSITE >> > [ 89.874] (II) Initializing built-in extension DAMAGE >> > [ 89.912] (II) AIGLX: Loaded and initialized >> > /usr/local/lib/dri/swrast_dri.so >> > [ 89.912] (II) GLX: Initialized DRISWRAST GL provider for screen 0 >> > [ 89.913] (II) intel(0): Setting screen physical size to 423 x 238 >> > [ 92.986] (II) config/hal: Adding input device AT Keyboard >> > [ 92.987] (II) LoadModule: "kbd" >> > [ 92.987] (II) Loading /usr/local/lib/xorg/modules/input/kbd_drv.so >> > [ 92.988] (II) Module kbd: vendor=3D"X.Org Foundation" >> > [ 92.989] compiled for 1.10.6, module version =3D 1.6.1 >> > [ 92.989] Module class: X.Org XInput Driver >> > [ 92.989] ABI class: X.Org XInput driver, version 12.2 >> > [ 92.989] (II) Using input driver 'kbd' for 'AT Keyboard' >> > [ 92.989] (II) Loading /usr/local/lib/xorg/modules/input/kbd_drv.so >> > [ 92.989] (**) AT Keyboard: always reports core events >> > [ 92.989] (**) AT Keyboard: always reports core events >> > [ 92.989] (**) Option "Protocol" "standard" >> > [ 92.989] (**) Option "XkbRules" "base" >> > [ 92.989] (**) Option "XkbModel" "pc105" >> > [ 92.989] (**) Option "XkbLayout" "us" >> > [ 92.989] (**) Option "config_info" >> > "hal:/org/freedesktop/Hal/devices/atkbd_0" >> > [ 92.989] (II) XINPUT: Adding extended input device "AT Keyboard" (= type: >> > KEYBOARD) >> > [ 95.110] (II) config/hal: Adding input device PS/2 Mouse >> > [ 95.110] (II) LoadModule: "mouse" >> > [ 95.111] (II) Loading /usr/local/lib/xorg/modules/input/mouse_drv.= so >> > [ 95.112] (II) Module mouse: vendor=3D"X.Org Foundation" >> > [ 95.112] compiled for 1.10.6, module version =3D 1.7.1 >> > [ 95.112] Module class: X.Org XInput Driver >> > [ 95.112] ABI class: X.Org XInput driver, version 12.2 >> > [ 95.112] (II) Using input driver 'mouse' for 'PS/2 Mouse' >> > [ 95.112] (II) Loading /usr/local/lib/xorg/modules/input/mouse_drv.= so >> > [ 95.112] (**) PS/2 Mouse: always reports core events >> > [ 95.112] (**) Option "Device" "/dev/psm0" >> > [ 95.112] (=3D=3D) PS/2 Mouse: Protocol: "Auto" >> > [ 95.112] (**) PS/2 Mouse: always reports core events >> > [ 95.165] (=3D=3D) PS/2 Mouse: Emulate3Buttons, Emulate3Timeout: 50 >> > [ 95.165] (**) PS/2 Mouse: ZAxisMapping: buttons 4 and 5 >> > [ 95.165] (**) PS/2 Mouse: Buttons: 9 >> > [ 95.165] (**) Option "config_info" >> > "hal:/org/freedesktop/Hal/devices/psm_0" >> > [ 95.165] (II) XINPUT: Adding extended input device "PS/2 Mouse" (t= ype: >> > MOUSE) >> > [ 95.165] (**) PS/2 Mouse: (accel) keeping acceleration scheme 1 >> > [ 95.165] (**) PS/2 Mouse: (accel) acceleration profile 0 >> > [ 95.165] (**) PS/2 Mouse: (accel) acceleration factor: 2.000 >> > [ 95.165] (**) PS/2 Mouse: (accel) acceleration threshold: 4 >> > [ 95.183] (II) PS/2 Mouse: SetupAuto: hw.iftype is 3, hw.model is 0 >> > [ 95.183] (II) PS/2 Mouse: SetupAuto: protocol is PS/2 >> > [ 95.340] (II) PS/2 Mouse: ps2EnableDataReporting: succeeded >> > [ 96.475] (II) intel(0): EDID vendor "SEC", prod id 12876 >> > [ 96.475] (II) intel(0): Printing DDC gathered Modelines: >> > [ 96.475] (II) intel(0): Modeline "1600x900"x0.0 98.21 1600 1648= 1680 >> > 1760 900 902 907 930 -hsync -vsync (55.8 kHz) >> > [ 96.755] (II) intel(0): EDID vendor "SEC", prod id 12876 >> > [ 96.755] (II) intel(0): Printing DDC gathered Modelines: >> > [ 96.755] (II) intel(0): Modeline "1600x900"x0.0 98.21 1600 1648= 1680 >> > 1760 900 902 907 930 -hsync -vsync (55.8 kHz) >> > [ 97.036] (II) intel(0): EDID vendor "SEC", prod id 12876 >> > [ 97.036] (II) intel(0): Printing DDC gathered Modelines: >> > [ 97.036] (II) intel(0): Modeline "1600x900"x0.0 98.21 1600 1648= 1680 >> > 1760 900 902 907 930 -hsync -vsync (55.8 kHz) >> > [ 97.315] (II) intel(0): EDID vendor "SEC", prod id 12876 >> > [ 97.315] (II) intel(0): Printing DDC gathered Modelines: >> > [ 97.315] (II) intel(0): Modeline "1600x900"x0.0 98.21 1600 1648= 1680 >> > 1760 900 902 907 930 -hsync -vsync (55.8 kHz) >> > [ 107.345] (II) intel(0): EDID vendor "SEC", prod id 12876 >> > [ 107.345] (II) intel(0): Printing DDC gathered Modelines: >> > [ 107.345] (II) intel(0): Modeline "1600x900"x0.0 98.21 1600 1648= 1680 >> > 1760 900 902 907 930 -hsync -vsync (55.8 kHz) >> > [ 108.696] Segmentation fault at address 0x3fffffffed >> > [ 108.696] >> > Fatal server error: >> > [ 108.697] Caught signal 11 (Segmentation fault). Server aborting >> > [ 108.697] >> > [ 108.697] >> > Please consult the The X.Org Foundation support >> > at http://wiki.x.org >> > for help. >> > [ 108.697] Please also check the log file at "/var/log/Xorg.0.log" f= or >> > additional information. >> > [ 108.697] >> > [ 108.698] (II) UnloadModule: "kbd" >> > [ 108.698] (II) Unloading kbd >> > [ 108.733] (II) UnloadModule: "mouse" >> > [ 108.733] (II) Unloading mouse >> > [ 108.733] (WW) intel(0): drmDropMaster failed: Unknown error: -22 >> > >> > Perhaps someone got an idea? >> > >> > Thanks a lot >> > >> > Johannes >> > _______________________________________________ >> > freebsd-current@freebsd.org mailing list >> > http://lists.freebsd.org/mailman/listinfo/freebsd-current >> > To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.= org" >> -- >> This message is for the person(s) named above only and may contain privi= leged, proprietary, or otherwise private information. If you received this = transmission in error, please notify the sender immediately and delete the = original. Any other use of the email by you is prohibited. >> _______________________________________________ >> freebsd-current@freebsd.org mailing list >> http://lists.freebsd.org/mailman/listinfo/freebsd-current >> To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.or= g" > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CABquGzVZzpi-6Ni3dkZ00N3js9ZnEuojCN87UV=adOD7Pp1=7A>