Date: Sat, 5 Nov 2011 12:01:51 +0000 (UTC) From: Hans Petter Selasky <hselasky@FreeBSD.org> To: src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-head@freebsd.org Subject: svn commit: r227108 - head/sys/dev/usb/serial Message-ID: <201111051201.pA5C1pGU064652@svn.freebsd.org>
next in thread | raw e-mail | index | archive | help
Author: hselasky Date: Sat Nov 5 12:01:51 2011 New Revision: 227108 URL: http://svn.freebsd.org/changeset/base/227108 Log: Implement support for modem control lines. Don't short terminate transmitted BULK data. Assume that the chip reads one USB packet at a time. PR: usb/162307 MFC after: 3 days Modified: head/sys/dev/usb/serial/uslcom.c Modified: head/sys/dev/usb/serial/uslcom.c ============================================================================== --- head/sys/dev/usb/serial/uslcom.c Sat Nov 5 11:18:46 2011 (r227107) +++ head/sys/dev/usb/serial/uslcom.c Sat Nov 5 12:01:51 2011 (r227108) @@ -63,43 +63,61 @@ SYSCTL_INT(_hw_usb_uslcom, OID_AUTO, deb #define USLCOM_SET_DATA_BITS(x) ((x) << 8) +/* Request types */ #define USLCOM_WRITE 0x41 #define USLCOM_READ 0xc1 +/* Request codes */ #define USLCOM_UART 0x00 #define USLCOM_BAUD_RATE 0x01 #define USLCOM_DATA 0x03 #define USLCOM_BREAK 0x05 #define USLCOM_CTRL 0x07 +#define USLCOM_RCTRL 0x08 +#define USLCOM_SET_FLOWCTRL 0x13 +/* USLCOM_UART values */ #define USLCOM_UART_DISABLE 0x00 #define USLCOM_UART_ENABLE 0x01 +/* USLCOM_CTRL/USLCOM_RCTRL values */ #define USLCOM_CTRL_DTR_ON 0x0001 #define USLCOM_CTRL_DTR_SET 0x0100 #define USLCOM_CTRL_RTS_ON 0x0002 #define USLCOM_CTRL_RTS_SET 0x0200 #define USLCOM_CTRL_CTS 0x0010 #define USLCOM_CTRL_DSR 0x0020 +#define USLCOM_CTRL_RI 0x0040 #define USLCOM_CTRL_DCD 0x0080 +/* USLCOM_BAUD_RATE values */ #define USLCOM_BAUD_REF 0x384000 +/* USLCOM_DATA values */ #define USLCOM_STOP_BITS_1 0x00 #define USLCOM_STOP_BITS_2 0x02 - #define USLCOM_PARITY_NONE 0x00 #define USLCOM_PARITY_ODD 0x10 #define USLCOM_PARITY_EVEN 0x20 #define USLCOM_PORT_NO 0xFFFF /* XXX think this should be 0 --hps */ +/* USLCOM_BREAK values */ #define USLCOM_BREAK_OFF 0x00 #define USLCOM_BREAK_ON 0x01 +/* USLCOM_SET_FLOWCTRL values - 1st word */ +#define USLCOM_FLOW_DTR_ON 0x00000001 +#define USLCOM_FLOW_CTS_HS 0x00000008 /* CTS handshake */ +#define USLCOM_FLOW_RESERVED 0xFFFFFF80 +/* USLCOM_SET_FLOWCTRL values - 2nd word */ +#define USLCOM_FLOW_RTS_ON 0x00000040 +#define USLCOM_FLOW_RTS_HS 0x00000080 /* RTS handshake */ + enum { USLCOM_BULK_DT_WR, USLCOM_BULK_DT_RD, + USLCOM_CTRL_DT_RD, USLCOM_N_TRANSFER, }; @@ -121,6 +139,7 @@ static device_detach_t uslcom_detach; static usb_callback_t uslcom_write_callback; static usb_callback_t uslcom_read_callback; +static usb_callback_t uslcom_control_callback; static void uslcom_open(struct ucom_softc *); static void uslcom_close(struct ucom_softc *); @@ -143,7 +162,7 @@ static const struct usb_config uslcom_co .endpoint = UE_ADDR_ANY, .direction = UE_DIR_OUT, .bufsize = USLCOM_BULK_BUF_SIZE, - .flags = {.pipe_bof = 1,.force_short_xfer = 1,}, + .flags = {.pipe_bof = 1,}, .callback = &uslcom_write_callback, }, @@ -155,6 +174,16 @@ static const struct usb_config uslcom_co .flags = {.pipe_bof = 1,.short_xfer_ok = 1,}, .callback = &uslcom_read_callback, }, + [USLCOM_CTRL_DT_RD] = { + .type = UE_CONTROL, + .endpoint = 0x00, + .direction = UE_DIR_ANY, + .interval = 150, /* poll status every 150 ms */ + .bufsize = sizeof(struct usb_device_request) + 8, + .flags = {.pipe_bof = 1,}, + .callback = &uslcom_control_callback, + .timeout = 1000, /* 1 second timeout */ + }, }; static struct ucom_callback uslcom_callback = { @@ -371,6 +400,8 @@ uslcom_open(struct ucom_softc *ucom) &req, NULL, 0, 1000)) { DPRINTF("UART enable failed (ignored)\n"); } + /* Start polling status */ + usbd_transfer_start(sc->sc_xfer[USLCOM_CTRL_DT_RD]); } static void @@ -379,13 +410,16 @@ uslcom_close(struct ucom_softc *ucom) struct uslcom_softc *sc = ucom->sc_parent; struct usb_device_request req; + /* Stop polling status */ + usbd_transfer_stop(sc->sc_xfer[USLCOM_CTRL_DT_RD]); + req.bmRequestType = USLCOM_WRITE; req.bRequest = USLCOM_UART; USETW(req.wValue, USLCOM_UART_DISABLE); USETW(req.wIndex, USLCOM_PORT_NO); USETW(req.wLength, 0); - if (ucom_cfg_do_request(sc->sc_udev, &sc->sc_ucom, + if (ucom_cfg_do_request(sc->sc_udev, &sc->sc_ucom, &req, NULL, 0, 1000)) { DPRINTF("UART disable failed (ignored)\n"); } @@ -452,6 +486,7 @@ uslcom_param(struct ucom_softc *ucom, st { struct uslcom_softc *sc = ucom->sc_parent; struct usb_device_request req; + uint32_t flowctrl[4]; uint16_t data; DPRINTF("\n"); @@ -503,7 +538,30 @@ uslcom_param(struct ucom_softc *ucom, st &req, NULL, 0, 1000)) { DPRINTF("Set format failed (ignored)\n"); } - return; + + if (t->c_cflag & CRTSCTS) { + flowctrl[0] = htole32(USLCOM_FLOW_RESERVED | + USLCOM_FLOW_DTR_ON | USLCOM_FLOW_CTS_HS); + flowctrl[1] = htole32(USLCOM_FLOW_RTS_HS); + flowctrl[2] = 0; + flowctrl[3] = 0; + } else { + flowctrl[0] = htole32(USLCOM_FLOW_RESERVED | + USLCOM_FLOW_DTR_ON); + flowctrl[1] = htole32(USLCOM_FLOW_RTS_ON); + flowctrl[2] = 0; + flowctrl[3] = 0; + } + req.bmRequestType = USLCOM_WRITE; + req.bRequest = USLCOM_SET_FLOWCTRL; + USETW(req.wValue, 0); + USETW(req.wIndex, USLCOM_PORT_NO); + USETW(req.wLength, sizeof(flowctrl)); + + if (ucom_cfg_do_request(sc->sc_udev, &sc->sc_ucom, + &req, flowctrl, 0, 1000)) { + DPRINTF("Set flowcontrol failed (ignored)\n"); + } } static void @@ -599,6 +657,63 @@ tr_setup: } static void +uslcom_control_callback(struct usb_xfer *xfer, usb_error_t error) +{ + struct uslcom_softc *sc = usbd_xfer_softc(xfer); + struct usb_page_cache *pc; + struct usb_device_request req; + uint8_t msr = 0; + uint8_t buf; + + switch (USB_GET_STATE(xfer)) { + case USB_ST_TRANSFERRED: + pc = usbd_xfer_get_frame(xfer, 1); + usbd_copy_out(pc, 0, &buf, sizeof(buf)); + if (buf & USLCOM_CTRL_CTS) + msr |= SER_CTS; + if (buf & USLCOM_CTRL_DSR) + msr |= SER_DSR; + if (buf & USLCOM_CTRL_RI) + msr |= SER_RI; + if (buf & USLCOM_CTRL_DCD) + msr |= SER_DCD; + + if (msr != sc->sc_msr) { + DPRINTF("status change msr=0x%02x " + "(was 0x%02x)\n", msr, sc->sc_msr); + sc->sc_msr = msr; + ucom_status_change(&sc->sc_ucom); + } + + /* FALLTHROUGH */ + + case USB_ST_SETUP: +tr_setup: + req.bmRequestType = USLCOM_READ; + req.bRequest = USLCOM_RCTRL; + USETW(req.wValue, 0); + USETW(req.wIndex, 0); + USETW(req.wLength, sizeof(buf)); + + usbd_xfer_set_frames(xfer, 2); + usbd_xfer_set_frame_len(xfer, 0, sizeof(req)); + usbd_xfer_set_frame_len(xfer, 1, sizeof(buf)); + + pc = usbd_xfer_get_frame(xfer, 0); + usbd_copy_in(pc, 0, &req, sizeof(req)); + usbd_transfer_submit(xfer); + break; + + default: /* error */ + if (error != USB_ERR_CANCELLED) { + DPRINTF("error=%s\n", usbd_errstr(error)); + goto tr_setup; + } + break; + } +} + +static void uslcom_start_read(struct ucom_softc *ucom) { struct uslcom_softc *sc = ucom->sc_parent;
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201111051201.pA5C1pGU064652>