Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 5 Apr 2000 19:35:07 -0400 (EDT)
From:      Kent Hauser <kent@tfd.com>
To:        current@freebsd.org
Subject:   pcm & SoundBlaster Live! PCI card
Message-ID:  <200004052335.TAA00273@chapel-hill.tfd.com>

next in thread | raw e-mail | index | archive | help
Hi all, 

I can't for the life of me get my new gateway computer 
to make any noise (at least with FreeBSD). I've tried
all the PNP/nonPNP combinations from LINT (and then some).

The card is a "Creative Labs Soundblaster Live!" PCI card. 
The gateway blurb is found on:

http://www.gateway.com/mes/default.asp?page=soundcards

The sound config lines & dmesg output are attached. Any
pointers would be greatly appreciated.

Thanks a bunch.
Kent


=========
options 	PNPBIOS
device		pcm
device		sbc
device		csa
device		pca0 at isa? port IO_TIMER1
=========

Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
	The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Wed Apr  5 19:14:25 EDT 2000
    kent@chapel-hill.tfd.com:/usr/src/sys/compile/GW
Calibrating clock(s) ... TSC clock: 696358058 Hz, i8254 clock: 1193099 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254"  frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Pentium III/Pentium III Xeon (696.41-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x681  Stepping = 1
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,XMM>
real memory  = 134217728 (131072K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009dfff, 643072 bytes (157 pages)
0x00462000 - 0x040fcfff, 63549440 bytes (15515 pages)
0x04100000 - 0x07ff7fff, 66027520 bytes (16120 pages)
avail memory = 126103552 (123148K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00f6a90
bios32: Entry = 0xfd780 (c00fd780)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0x203
pnpbios: Found PnP BIOS data at 0xc00f6ae0
pnpbios: Entry = f0000:9e33  Rev = 1.0
Other BIOS signatures found:
ACPI: 000f6ac0
Preloaded elf kernel "kernel" at 0xc0449000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Creating DISK md0
Math emulator present
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80000058
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=71908086)
npx0: <math processor> on motherboard
npx0: INT 16 interface
pci_open(1):	mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=71908086)
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
found->	vendor=0x8086, dev=0x7190, revid=0x03
	class=06-00-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	map[10]: type 1, range 32, base f8000000, size 26, enabled
found->	vendor=0x8086, dev=0x7191, revid=0x03
	class=06-04-00, hdrtype=0x01, mfdev=0
	subordinatebus=1 	secondarybus=1
found->	vendor=0x8086, dev=0x7110, revid=0x02
	class=06-01-00, hdrtype=0x00, mfdev=1
	subordinatebus=0 	secondarybus=0
found->	vendor=0x8086, dev=0x7111, revid=0x01
	class=01-01-80, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	map[20]: type 1, range 32, base 00001400, size  4, enabled
found->	vendor=0x8086, dev=0x7112, revid=0x01
	class=0c-03-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=d, irq=9
	map[20]: type 1, range 32, base 000010c0, size  5, enabled
found->	vendor=0x8086, dev=0x7113, revid=0x02
	class=06-80-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	map[90]: type 1, range 32, base 00007000, size  4, enabled
found->	vendor=0x14f1, dev=0x1036, revid=0x08
	class=07-80-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=5
	map[10]: type 1, range 32, base f4000000, size 16, enabled
	map[14]: type 1, range 32, base 00001410, size  3, enabled
found->	vendor=0x1102, dev=0x0002, revid=0x07
	class=04-01-00, hdrtype=0x00, mfdev=1
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=11
	map[10]: type 1, range 32, base 000010e0, size  5, enabled
found->	vendor=0x1102, dev=0x7002, revid=0x07
	class=09-80-00, hdrtype=0x00, mfdev=1
	subordinatebus=0 	secondarybus=0
	map[10]: type 3, range 32, base 00001418, size  3, enabled
found->	vendor=0x105a, dev=0x4d38, revid=0x01
	class=01-80-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=10
	map[10]: type 1, range 32, base 00001430, size  3, enabled
	map[14]: type 1, range 32, base 00001424, size  2, enabled
	map[18]: type 3, range 32, base 00001428, size  3, enabled
	map[1c]: type 1, range 32, base 00001420, size  2, enabled
	map[20]: type 1, range 32, base 00001080, size  6, enabled
	map[24]: type 1, range 32, base f4020000, size 17, enabled
found->	vendor=0x10b7, dev=0x9006, revid=0x04
	class=02-00-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=9
	map[10]: type 1, range 32, base 00001000, size  7, enabled
	map[14]: type 1, range 32, base f4010000, size  7, enabled
found->	vendor=0x12b9, dev=0x1008, revid=0x01
	class=07-00-02, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=5
	map[10]: type 3, range 32, base 00001438, size  3, enabled
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
found->	vendor=0x10de, dev=0x0028, revid=0x15
	class=03-00-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=11
	map[10]: type 1, range 32, base f5000000, size 24, enabled
	map[14]: type 1, range 32, base fc000000, size 25, enabled
pci1: <PCI bus> on pcib1
pci1: <NVidia Riva TNT2 graphics accelerator> (vendor=0x10de, dev=0x0028) at 0.0 irq 11
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x1400-0x140f at device 7.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x1400
ata0: mask=00 status0=ff status1=ff
ata0: probe allocation failed
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x1408
ata1: mask=03 status0=50 status1=50
ata1: mask=03 status0=00 status1=10
ata1: devices = 0xc
ata1: at 0x170 irq 15 on atapci0
pci0: <Intel 82371AB/EB (PIIX4) USB controller> (vendor=0x8086, dev=0x7112) at 7.2 irq 9
chip1: <Intel 82371AB Power management controller> port 0x7000-0x700f at device 7.3 on pci0
pci0: <unknown card> (vendor=0x14f1, dev=0x1036) at 13.0 irq 5
pci0: <unknown card> (vendor=0x1102, dev=0x0002) at 14.0 irq 11
pci0: <unknown card> (vendor=0x1102, dev=0x7002) at 14.1
atapci1: <Promise ATA66 controller> port 0x1080-0x10bf,0x1420-0x1423,0x1428-0x142f,0x1424-0x1427,0x1430-0x1437 mem 0xf4020000-0xf403ffff irq 10 at device 15.0 on pci0
ata-: ata2 exists, using next available unit number
ata2: iobase=0x1430 altiobase=0x1424 bmaddr=0x1080
ata2: mask=03 status0=50 status1=00
ata2: mask=03 status0=50 status1=00
ata2: devices = 0x1
ata2: at 0x1430 on atapci1
ata3: iobase=0x1428 altiobase=0x1420 bmaddr=0x1088
ata3: mask=03 status0=00 status1=00
ata3: mask=03 status0=00 status1=00
ata3: devices = 0x0
ata3: probe allocation failed
xl0: <3Com 3c900B-TPC Etherlink XL> port 0x1000-0x107f mem 0xf4010000-0xf401007f irq 9 at device 16.0 on pci0
xl0: Ethernet address: 00:50:da:17:a0:3a
xl0: media options word: 18
xl0: guessing TPC (BNC/TP)
xl0: found 10baseT
xl0: found BNC
xl0: selecting 10baseT transceiver, half duplex
xl0: supplying EUI64: 00:50:da:ff:fe:17:a0:3a
bpf: xl0 attached
sio0: irq maps: 0x3 0x23 0x3 0x3
sio0: <3COM PCI FaxModem> port 0x1438-0x143f irq 5 at device 17.0 on pci0
sio0: moving to sio4
sio4: type 16550A
pnpbios: 17 devices, largest 317 bytes
PNP0c02: adding io range 0x370-0x371, size=0x2, align=0x1
PNP0c02: adding io range 0xea-0xeb, size=0x2, align=0x1
PNP0c02: adding fixed memory32 range 0xfffc0000-0xffffffff, size=0x40000
PNP0c02: end config
pnpbios: handle 0 device ID PNP0c02 (020cd041)
PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000
PNP0c01: adding fixed memory32 range 0xe4000-0xfffff, size=0x1c000
PNP0c01: adding fixed memory32 range 0x100000-0x7ffffff, size=0x7f00000
PNP0c01: adding fixed memory32 range 0xfff80000-0xfffbffff, size=0x40000
PNP0c01: end config
pnpbios: handle 1 device ID PNP0c01 (010cd041)
PNP0200: adding io range 0-0xf, size=0x10, align=0x1
PNP0200: adding io range 0x81-0x8f, size=0xf, align=0x1
PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0x1
PNP0200: adding dma mask 0x10
PNP0200: end config
pnpbios: handle 2 device ID PNP0200 (0002d041)
PNP0000: adding io range 0x20-0x21, size=0x2, align=0x1
PNP0000: adding io range 0xa0-0xa1, size=0x2, align=0x1
PNP0000: adding irq mask 00x4
PNP0000: end config
pnpbios: handle 3 device ID PNP0000 (0000d041)
PNP0100: adding io range 0x40-0x43, size=0x4, align=0x1
PNP0100: adding irq mask 00x1
PNP0100: end config
pnpbios: handle 4 device ID PNP0100 (0001d041)
PNP0b00: adding io range 0x70-0x71, size=0x2, align=0x1
PNP0b00: adding irq mask 0x100
PNP0b00: end config
pnpbios: handle 5 device ID PNP0b00 (000bd041)
PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1
PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1
PNP0303: adding irq mask 00x2
PNP0303: end config
pnpbios: handle 6 device ID PNP0303 (0303d041)
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1
PNP0c04: adding irq mask 0x2000
PNP0c04: end config
pnpbios: handle 7 device ID PNP0c04 (040cd041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1
PNP0800: end config
pnpbios: handle 8 device ID PNP0800 (0008d041)
PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0x1
PNP0a03: end config
pnpbios: handle 9 device ID PNP0a03 (030ad041)
PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0x1
PNP0c02: adding io range 0x8000-0x803f, size=0x40, align=0x1
PNP0c02: adding io range 0x7000-0x700f, size=0x10, align=0x1
PNP0c02: end config
pnpbios: handle 10 device ID PNP0c02 (020cd041)
PNP0c02: adding fixed memory32 range 0xcb000-0xcbfff, size=0x1000
PNP0c02: end config
pnpbios: handle 12 device ID PNP0c02 (020cd041)
PNP0f13: adding irq mask 0x1000
PNP0f13: end config
pnpbios: handle 13 device ID PNP0f13 (130fd041)
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0x8
PNP0501: adding irq mask 0x10
PNP0501: end config
pnpbios: handle 14 device ID PNP0501 (0105d041)
PNP0501: adding io range 0x2f8-0x2ff, size=0x8, align=0x8
PNP0501: adding irq mask 00x8
PNP0501: end config
pnpbios: handle 15 device ID PNP0501 (0105d041)
PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0x8
PNP0700: adding io range 0x3f7-0x3f7, size=0x1, align=0x1
PNP0700: adding irq mask 0x40
PNP0700: adding dma mask 0x4
PNP0700: end config
pnpbios: handle 17 device ID PNP0700 (0007d041)
PNP0401: adding io range 0x378-0x37f, size=0x8, align=0x8
PNP0401: adding io range 0x778-0x77f, size=0x8, align=0x8
PNP0401: adding irq mask 0x80
PNP0401: adding dma mask 0x8
PNP0401: end config
pnpbios: handle 20 device ID PNP0401 (0104d041)
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
ata-: ata0 exists, using next available unit number
ata-: ata1 exists, using next available unit number
ex_isa_identify()
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata4: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x0000
ata4: mask=00 status0=ff status1=ff
ata4: probe allocation failed
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x330
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x334
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x230
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x234
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x130
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x134
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
psm0: current command byte:0047
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
psm: status 00 02 64
psm: status 00 00 64
psm: status 00 03 64
psm: status 00 03 64
psm: data 08 06 00
psm: data 08 01 00
psm: status 00 02 64
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000000, packet size:4
psm0: syncmask:08, syncbits:08
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0e 0f 00 00 07 30 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
pcic1: not probed (disabled)
sio0: irq maps: 0x41 0x51 0x41 0x41
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: irq maps: 0x41 0x49 0x41 0x41
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: ECP SPP ECP+EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppi0: <Parallel I/O> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
plip0: <PLIP network interface> on ppbus0
bpf: lp0 attached
isa_compat: didn't get irq for le
pca0 at port 0x40 on isa0
isa_probe_children: probing PnP devices
unknown0: <PNP0c02> at port 0x370-0x371,0xea-0xeb iomem 0xfffc0000-0xffffffff on isa0
unknown1: <PNP0c01> at iomem 0-0x9ffff,0xe4000-0xfffff,0x100000-0x7ffffff,0xfff80000-0xfffbffff on isa0
unknown2: <PNP0200> at port 0-0xf,0x81-0x8f,0xc0-0xdf drq 4 on isa0
unknown: <PNP0000> can't assign resources
unknown3: <PNP0100> at port 0x40-0x43 irq 0 on isa0
unknown4: <PNP0b00> at port 0x70-0x71 irq 8 on isa0
unknown: <PNP0303> can't assign resources
unknown5: <PNP0c04> at port 0xf0-0xff irq 13 on isa0
pca1: <AT-style speaker sound> at port 0x61 on isa0
unknown6: <PNP0a03> at port 0xcf8-0xcff on isa0
unknown7: <PNP0c02> at port 0x4d0-0x4d1,0x8000-0x803f,0x7000-0x700f on isa0
unknown8: <PNP0c02> at iomem 0xcb000-0xcbfff on isa0
unknown: <PNP0f13> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0700> can't assign resources
unknown: <PNP0401> can't assign resources
BIOS Geometries:
 0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
 0 accounted for
Device configuration finished.
new masks: bio 40088440, tty 400310ba, net 400712ba
bpf: sl0 attached
bpf: ppp0 attached
new masks: bio 40088440, tty 400310ba, net 400712ba
bpf: lo0 attached
bpf: gif0 attached
bpf: gif1 attached
bpf: gif2 attached
bpf: gif3 attached
bpf: stf0 attached
bpf: faith0 attached
IPsec: Initialized Security Association Processing.
ata2-master: success setting up UDMA4 mode on Promise chip
ad4: <IBM-DPTA-372730/P78GA30A> ATA-4 disk at ata2 as master
ad4: 26105MB (53464320 sectors), 53040 cyls, 16 heads, 63 S/T, 512 B/S
ad4: 16 secs/int, 32 depth queue, UDMA66
ad4: piomode=4 dmamode=2 udmamode=4 cblid=1
Creating DISK ad4
Creating DISK wd4
ata1-master: piomode=4 dmamode=2 udmamode=2 dmaflag=1
ata1-master: success setting up PIO4 mode on generic chip
acd0: <Pioneer DVD-ROM ATAPIModel DVD-114 0117/E1.17> DVD-ROM drive at ata1 as master
acd0: read 2750KB/s (6875KB/s), 512KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream, DVD-ROM, DVD-R, packet
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: CD-ROM 120mm audio disc loaded, unlocked
ata1-slave: piomode=4 dmamode=2 udmamode=-1 dmaflag=1
ata1-slave: success setting up PIO4 mode on generic chip
acd1: <R/RW 4x4x24/1.08> CD-RW drive at ata1 as slave
acd1: read 4134KB/s (4134KB/s) write 689KB/s (689KB/s), 2048KB buffer, PIO4
acd1: Reads: CD-R, CD-RW, CD-DA stream, packet
acd1: Writes: CD-R, CD-RW, test write
acd1: Audio: play, 2 volume levels
acd1: Mechanism: ejectable tray
acd1: Medium: no/blank disc inside, unlocked
Mounting root from ufs:/dev/ad4s2a
ad4s1: type 0xb, start 63, end = 16048934, size 16048872 : OK
ad4s2: type 0xa5, start 16048935, end = 53464319, size 37415385 : OK
start_init: trying /sbin/init
xl0: starting DAD for fe80:0001::0250:daff:fe17:a03a
bpf: tun0 attached
xl0: DAD complete for fe80:0001::0250:daff:fe17:a03a - no duplicates found
Linux-ELF exec handler installed


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200004052335.TAA00273>