Date: Sat, 6 Nov 2004 00:13:46 -0800 From: Aaron Walker <zenboy@gmail.com> To: Michael Nottebrock <michaelnottebrock@gmx.net> Cc: freebsd-multimedia@freebsd.org Subject: Re: Onboard Sound - VIA8233 Message-ID: <bddfa6fa04110600137c50fb8e@mail.gmail.com> In-Reply-To: <200411041733.19680.michaelnottebrock@gmx.net> References: <bddfa6fa0411040053919c76c@mail.gmail.com> <200411041548.24537.michaelnottebrock@gmx.net> <bddfa6fa04110408053f41768b@mail.gmail.com> <200411041733.19680.michaelnottebrock@gmx.net>
index | next in thread | previous in thread | raw e-mail
[-- Attachment #1 --]
Okay, it turned out to be a hardware problem, Knoppix picked up the
AC97 onboard sound, and lo, there was sound only on the left channel.
So I thought I would be sneaky and throw in my new Chaintech AV710
(Envy24HT), but there's no driver support for that one..
So I threw in another oldy but moldy, the Maxi Sound Muse (CM8738),
which is picked up in dmesg, but shows "detatched" (see output of
dmesg : attatched) any ideas what that means?
Aaron Walker
Fairview, OR
[-- Attachment #2 --]
Script started on Sat Nov 6 00:12:13 2004
You have mail.
cramster# scanpci
pci bus 0x0000 cardnum 0x00 function 0x00: vendor 0x1106 device 0x3099
VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333]
pci bus 0x0000 cardnum 0x01 function 0x00: vendor 0x1106 device 0xb099
VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333 AGP]
pci bus 0x0000 cardnum 0x09 function 0x00: vendor 0x1106 device 0x3038
VIA Technologies, Inc. USB
pci bus 0x0000 cardnum 0x09 function 0x01: vendor 0x1106 device 0x3038
VIA Technologies, Inc. USB
pci bus 0x0000 cardnum 0x09 function 0x02: vendor 0x1106 device 0x3104
VIA Technologies, Inc. USB 2.0
pci bus 0x0000 cardnum 0x0a function 0x00: vendor 0x11ad device 0x0002
Lite-On Communications Inc LNE100TX
pci bus 0x0000 cardnum 0x0c function 0x00: vendor 0x13f6 device 0x0111
C-Media Electronics Inc CM8738
pci bus 0x0000 cardnum 0x0e function 0x00: vendor 0x1103 device 0x0004
Triones Technologies, Inc. HPT366/368/370/370A/372
pci bus 0x0000 cardnum 0x11 function 0x00: vendor 0x1106 device 0x3147
VIA Technologies, Inc. VT8233A ISA Bridge
pci bus 0x0000 cardnum 0x11 function 0x01: vendor 0x1106 device 0x0571
VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE
pci bus 0x0000 cardnum 0x11 function 0x02: vendor 0x1106 device 0x3038
VIA Technologies, Inc. USB
pci bus 0x0000 cardnum 0x11 function 0x03: vendor 0x1106 device 0x3038
VIA Technologies, Inc. USB
pci bus 0x0001 cardnum 0x00 function 0x00: vendor 0x10de device 0x0110
nVidia Corporation NV11 [GeForce2 MX/MX 400]
cramster# dmesg | grep -i pcm
pcm0: <CMedia CMI8738> port 0xcc00-0xccff irq 5 at device 12.0 on pci0
pcm0: detached
cramster# dmesg
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2-CURRENT #1: Wed Nov 3 23:50:19 PST 2004
root@cramster.walkers.attbi.com:/usr/obj/usr/src/sys/HOOLIGAN-110404
WARNING: Kernel preemption is disabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) XP 1800+ (1536.83-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x662 Stepping = 2
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0480000<MP,AMIE,DSP,3DNow!>
real memory = 805240832 (767 MB)
avail memory = 782475264 (746 MB)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <VIA694 AWRDACPI> on motherboard
acpi0: [GIANT-LOCKED]
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU (3 Cx states)> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0x5000-0x500f,0x4080-0x40ff,0x4000-0x407f,0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA Generic host to PCI bridge> mem 0xe8000000-0xe9ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
uhci0: <VIA 83C572 USB controller> port 0xc000-0xc01f irq 10 at device 9.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xc400-0xc41f irq 5 at device 9.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xed001000-0xed0010ff irq 11 at device 9.2 on pci0
ehci0: [GIANT-LOCKED]
ehci_pci_attach: companion usb0
ehci_pci_attach: companion usb1
usb2: EHCI version 0.95
usb2: companion controllers, 2 ports each: usb0 usb1
usb2: <VIA VT6202 USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
dc0: <82c169 PNIC 10/100BaseTX> port 0xc800-0xc8ff mem 0xed000000-0xed0000ff irq 5 at device 10.0 on pci0
miibus0: <MII bus> on dc0
bmtphy0: <BCM5201 10/100baseTX PHY> on miibus0
bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc0: Ethernet address: 00:a0:cc:d6:c7:03
dc0: [GIANT-LOCKED]
pci0: <multimedia, audio> at device 12.0 (no driver attached)
atapci0: <HighPoint HPT372 UDMA133 controller> port 0xe000-0xe0ff,0xdc00-0xdc03,0xd800-0xd807,0xd400-0xd403,0xd000-0xd007 irq 10 at device 14.0 on pci0
ata2: at 0xd000 on atapci0
ata3: at 0xd800 on atapci0
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <VIA 8233A UDMA133 controller> port 0xe400-0xe40f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 17.1 on pci0
ata0: at 0x1f0 irq 14 on atapci1
ata1: at 0x170 irq 15 on atapci1
uhci2: <VIA 83C572 USB controller> port 0xe800-0xe81f irq 11 at device 17.2 on pci0
uhci2: [GIANT-LOCKED]
usb3: <VIA 83C572 USB controller> on uhci2
usb3: USB revision 1.0
uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhci3: <VIA 83C572 USB controller> port 0xec00-0xec1f irq 11 at device 17.3 on pci0
uhci3: [GIANT-LOCKED]
usb4: <VIA 83C572 USB controller> on uhci3
usb4: USB revision 1.0
uhub4: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
fdc0: <floppy drive controller> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse Explorer, device ID 4
orm0: <ISA Option ROM> at iomem 0xc0000-0xcbfff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1536830483 Hz quality 800
Timecounters tick every 10.000 msec
IPsec: Initialized Security Association Processing.
acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0%
ad0: 28629MB <WDC WD300BB-00AUA1> [58168/16/63] at ata0-master UDMA100
ATAPI_RESET time = 70us
acd0: DVDROM <TOSHIBA DVD-ROM SD-M1212> at ata1-master UDMA33
ad4: 76319MB <WDC WD800JB-00ETA0> [155061/16/63] at ata2-master UDMA100
ad5: 76319MB <WDC WD800BB-00DAA1> [155061/16/63] at ata2-slave UDMA100
ad6: 76319MB <WDC WD800BB-00CAA1> [155061/16/63] at ata3-master UDMA100
ar0: 76319MB <ATA RAID1 array> [9729/255/63] status: READY subdisks:
disk0 READY on ad4 at ata2-master
disk1 READY on ad5 at ata2-slave
Mounting root from ufs:/dev/ad0s1a
dc0: failed to force tx and rx to idle state
dc0: failed to force tx and rx to idle state
dc0: failed to force tx and rx to idle state
pcm0: <CMedia CMI8738> port 0xcc00-0xccff irq 5 at device 12.0 on pci0
pcm0: detached
cramster# exit
exit
Script done on Sat Nov 6 00:12:30 2004
help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?bddfa6fa04110600137c50fb8e>