Date: Mon, 4 Jun 2001 13:05:42 +0300 From: Valentin Nechayev <netch@iv.nn.kiev.ua> To: current@freebsd.org Subject: panic: free: multiple frees Message-ID: <20010604130541.A612@iv.nn.kiev.ua>
next in thread | raw e-mail | index | archive | help
-current, cvsup: date=2001.06.03.00.00.00
Normally worked, but after Ctrl-Alt-Del:
IdlePTD 4038656
initial pcb at 32f940
panicstr: from debugger
panic messages:
---
panic: free: multiple frees
panic: from debugger
Uptime: 25m49s
(kgdb) bt
#0 0xc0199a36 in dumpsys ()
#1 0xc0199823 in boot ()
#2 0xc0199c3d in panic ()
#3 0xc01201d5 in db_panic ()
#4 0xc0120175 in db_command ()
#5 0xc012023a in db_command_loop ()
#6 0xc0122403 in db_trap ()
#7 0xc02881aa in kdb_trap ()
#8 0xc0295450 in trap ()
#9 0xc0288418 in Debugger ()
#10 0xc0199c34 in panic ()
#11 0xc0193089 in free ()
#12 0xc01d0807 in cache_zap ()
#13 0xc01d0d50 in cache_purgevfs ()
#14 0xc01d9c4f in dounmount ()
#15 0xc01d839e in vfs_unmountall ()
#16 0xc019978f in boot ()
#17 0xc0199144 in reboot ()
#18 0xc0296061 in syscall ()
#19 0xc0288c8d in syscall_with_err_pushed ()
#20 0x80486ca in ?? ()
#21 0x80484a3 in ?? ()
#22 0x8048125 in ?? ()
(no debug symbols yet, sorry)
Startup dmesg:
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Mon Jun 4 09:11:46 EEST 2001
root@iv.nn.kiev.ua:/usr/obj/usr/HEAD/src/sys/nn12
Setting fdc 0 at to isa (string)
Setting fdc 0 port to 1008 (int)
Setting fdc 0 irq to 6 (int)
Setting fdc 0 drq to 2 (int)
Setting fd 0 at to fdc0 (string)
Setting fd 0 drive to 0 (int)
Setting fd 1 at to fdc0 (string)
Setting fd 1 drive to 1 (int)
Setting ata 0 at to isa (string)
Setting ata 0 port to 496 (int)
Setting ata 0 irq to 14 (int)
Setting ata 1 at to isa (string)
Setting ata 1 port to 368 (int)
Setting ata 1 irq to 15 (int)
Setting adv 0 at to isa (string)
Setting bt 0 at to isa (string)
Setting aha 0 at to isa (string)
Setting aic 0 at to isa (string)
Setting atkbdc 0 at to isa (string)
Setting atkbdc 0 port to 96 (int)
Setting atkbd 0 at to atkbdc (string)
Setting atkbd 0 irq to 1 (int)
Setting atkbd 0 flags to 1 (int)
Setting psm 0 at to atkbdc (string)
Setting psm 0 irq to 12 (int)
Setting vga 0 at to isa (string)
Setting sc 0 at to isa (string)
Setting sc 0 flags to 256 (int)
Setting vt 0 at to isa (string)
Setting npx 0 at to nexus (string)
Setting npx 0 port to 240 (int)
Setting npx 0 irq to 13 (int)
Setting apm 0 at to nexus (string)
Setting apm 0 disabled to 1 (int)
Setting apm 0 flags to 32 (int)
Setting pmtimer 0 at to isa (string)
Setting pcic 0 at to isa (string)
Setting pcic 0 port to 992 (int)
Setting pcic 0 maddr to 851968 (int)
Setting pcic 1 at to isa (string)
Setting pcic 1 irq to 11 (int)
Setting pcic 1 port to 994 (int)
Setting pcic 1 maddr to 868352 (int)
Setting pcic 1 disabled to 1 (int)
Setting sio 0 at to isa (string)
Setting sio 0 port to 1016 (int)
Setting sio 0 flags to 16 (int)
Setting sio 0 irq to 4 (int)
Setting sio 1 at to isa (string)
Setting sio 1 port to 760 (int)
Setting sio 1 irq to 3 (int)
Setting sio 2 at to isa (string)
Setting sio 2 disabled to 1 (int)
Setting sio 2 port to 1000 (int)
Setting sio 2 irq to 5 (int)
Setting sio 3 at to isa (string)
Setting sio 3 disabled to 1 (int)
Setting sio 3 port to 744 (int)
Setting sio 3 irq to 9 (int)
Setting ppc 0 at to isa (string)
Setting ppc 0 irq to 7 (int)
Setting ed 0 at to isa (string)
Setting ed 0 port to 640 (int)
Setting ed 0 irq to 10 (int)
Setting ed 0 maddr to 884736 (int)
Setting cs 0 at to isa (string)
Setting cs 0 port to 768 (int)
Setting sn 0 at to isa (string)
Setting sn 0 port to 768 (int)
Setting sn 0 irq to 10 (int)
Setting ie 0 at to isa (string)
Setting ie 0 port to 768 (int)
Setting ie 0 irq to 10 (int)
Setting ie 0 maddr to 851968 (int)
Setting fe 0 at to isa (string)
Setting fe 0 port to 768 (int)
Setting le 0 at to isa (string)
Setting le 0 port to 768 (int)
Setting le 0 irq to 5 (int)
Setting le 0 maddr to 851968 (int)
Setting lnc 0 at to isa (string)
Setting lnc 0 port to 640 (int)
Setting lnc 0 irq to 10 (int)
Setting lnc 0 drq to 0 (int)
Setting adv 0 at to isa (string)
Setting aha 0 at to isa (string)
Setting aic 0 at to isa (string)
Setting apm 0 at to nexus (string)
Setting apm 0 disabled to 1 (int)
Setting apm 0 flags to 32 (int)
Setting ata 0 at to isa (string)
Setting ata 0 irq to 14 (int)
Setting ata 0 port to 496 (int)
Setting ata 1 at to isa (string)
Setting ata 1 irq to 15 (int)
Setting ata 1 port to 368 (int)
Setting atkbd 0 at to atkbdc (string)
Setting atkbd 0 flags to 1 (int)
Setting atkbd 0 irq to 1 (int)
Setting atkbdc 0 at to isa (string)
Setting atkbdc 0 port to 96 (int)
Setting bt 0 at to isa (string)
Setting cs 0 at to isa (string)
Setting cs 0 port to 768 (int)
Setting ed 0 at to isa (string)
Setting ed 0 irq to 10 (int)
Setting ed 0 maddr to 884736 (int)
Setting ed 0 port to 640 (int)
Setting fd 0 at to fdc0 (string)
Setting fd 0 drive to 0 (int)
Setting fd 1 at to fdc0 (string)
Setting fd 1 drive to 1 (int)
Setting fdc 0 at to isa (string)
Setting fdc 0 drq to 2 (int)
Setting fdc 0 irq to 6 (int)
Setting fdc 0 port to 1008 (int)
Setting fe 0 at to isa (string)
Setting fe 0 port to 768 (int)
Setting ie 0 at to isa (string)
Setting ie 0 irq to 10 (int)
Setting ie 0 maddr to 851968 (int)
Setting ie 0 port to 768 (int)
Setting le 0 at to isa (string)
Setting le 0 irq to 5 (int)
Setting le 0 maddr to 851968 (int)
Setting le 0 port to 768 (int)
Setting lnc 0 at to isa (string)
Setting lnc 0 drq to 0 (int)
Setting lnc 0 irq to 10 (int)
Setting lnc 0 port to 640 (int)
Setting npx 0 at to nexus (string)
Setting npx 0 irq to 13 (int)
Setting npx 0 port to 240 (int)
Setting pcic 0 at to isa (string)
Setting pcic 0 maddr to 851968 (int)
Setting pcic 0 port to 992 (int)
Setting pcic 1 at to isa (string)
Setting pcic 1 disabled to 1 (int)
Setting pcic 1 irq to 11 (int)
Setting pcic 1 maddr to 868352 (int)
Setting pcic 1 port to 994 (int)
Setting pcm 0 at to isa (string)
Setting pcm 0 drq to 1 (int)
Setting pcm 0 flags to 0 (int)
Setting pcm 0 irq to 10 (int)
Setting pmtimer 0 at to isa (string)
Setting ppc 0 at to isa (string)
Setting ppc 0 irq to 7 (int)
Setting psm 0 at to atkbdc (string)
Setting psm 0 irq to 12 (int)
Setting sc 0 at to isa (string)
Setting sc 0 flags to 256 (int)
Setting sio 0 at to isa (string)
Setting sio 0 flags to 16 (int)
Setting sio 0 irq to 4 (int)
Setting sio 0 port to 1016 (int)
Setting sio 1 at to isa (string)
Setting sio 1 irq to 3 (int)
Setting sio 1 port to 760 (int)
Setting sio 2 at to isa (string)
Setting sio 2 disabled to 1 (int)
Setting sio 2 irq to 5 (int)
Setting sio 2 port to 1000 (int)
Setting sio 3 at to isa (string)
Setting sio 3 disabled to 1 (int)
Setting sio 3 irq to 9 (int)
Setting sio 3 port to 744 (int)
Setting sn 0 at to isa (string)
Setting sn 0 irq to 10 (int)
Setting sn 0 port to 768 (int)
Setting vga 0 at to isa (string)
Setting vt 0 at to isa (string)
Calibrating clock(s) ... TSC clock: 298979258 Hz, i8254 clock: 1193244 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
Timecounter "TSC" frequency 298964608 Hz
CPU: AMD-K6(tm) 3D processor (298.96-MHz 586-class CPU)
Origin = "AuthenticAMD" Id = 0x58c Stepping = 12
Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX>
AMD Features=0x80000800<SYSCALL,3DNow!>
Data TLB: 128 entries, 2-way associative
Instruction TLB: 64 entries, 1-way associative
L1 data cache: 32 kbytes, 32 bytes/line, 2 lines/tag, 2-way associative
L1 instruction cache: 32 kbytes, 32 bytes/line, 2 lines/tag, 2-way associative
Write Allocate Disable
real memory = 134217728 (131072K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009ffff, 651264 bytes (159 pages)
0x003e1000 - 0x07febfff, 130068480 bytes (31755 pages)
avail memory = 126554112 (123588K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00facc0
bios32: Entry = 0xfb140 (c00fb140) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xb170
pnpbios: Found PnP BIOS data at 0xc00fbce0
pnpbios: Entry = f0000:bd08 Rev = 1.0
Other BIOS signatures found:
Preloaded elf kernel "kernel" at 0xc03bb000.
null: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
K6-family MTRR support enabled (2 registers)
VESA: information block
56 45 53 41 00 02 d0 0c 00 c0 00 00 00 00 16 0d
00 c0 40 00 01 01 ef 0c 00 c0 00 0d 00 c0 0e 0d
00 c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
VESA: 45 mode(s) found
VESA: v2.0, 4096k memory, flags:0x0, mode table:0xc00c0d16 (c0000d16)
VESA: S3 Incorporated. ViRGE /DX /GX
VESA: S3 Incorporated. ViRGE /DX /GX Rev B
Using $PIR table, 5 entries at 0xc00fdaa0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: physical bus=0
found-> vendor=0x8086, dev=0x7100, revid=0x01
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
found-> vendor=0x8086, dev=0x7110, revid=0x01
bus=0, slot=7, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
map[20]: type 4, range 32, base 0000f000, size 4, enabled
found-> vendor=0x8086, dev=0x7111, revid=0x01
bus=0, slot=7, func=1
class=01-01-80, hdrtype=0x00, mfdev=0
map[20]: type 4, range 32, base 00006400, size 5, enabled
found-> vendor=0x8086, dev=0x7112, revid=0x01
bus=0, slot=7, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
intpin=d, irq=11
map[90]: type 4, range 32, base 00005000, size 4, enabled
found-> vendor=0x8086, dev=0x7113, revid=0x01
bus=0, slot=7, func=3
class=06-80-00, hdrtype=0x00, mfdev=0
map[10]: type 1, range 32, base e0000000, size 26, enabled
found-> vendor=0x5333, dev=0x8a01, revid=0x01
bus=0, slot=19, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
intpin=a, irq=10
pci0: <PCI bus> on pcib0
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device 7.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xf000
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI probe 00 00
ata0-slave: ATAPI probe 00 00
ata0: mask=03 stat0=50 stat1=00
ata0-master: ATA probe 01 a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xf008
ata1: mask=03 ostat0=b5 ostat2=50
ata1-master: ATAPI probe ff ff
ata1-slave: ATAPI probe 14 eb
ata1: mask=03 stat0=54 stat1=00
ata1-master: ATA probe eb ff
ata1: devices=08
ata1: at 0x170 irq 15 on atapci0
pci0: <serial bus, USB> at 7.2 (no driver attached)
Timecounter "PIIX" frequency 3579545 Hz
pci0: <bridge, PCI-unknown> at 7.3 (no driver attached)
pci0: <display, VGA> at 19.0 (no driver attached)
ata-: ata0 already exists, using ata2 instead
ata-: ata1 already exists, using ata3 instead
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
pnpbios: 14 devices, largest 69 bytes
PNP0000: adding irq mask 0x4
PNP0000: adding io range 0x20-0x21, size=0x2, align=0
PNP0000: adding io range 0xa0-0xa1, size=0x2, align=0
PNP0000: end config
pnpbios: handle 0 device ID PNP0000 (0000d041)
PNP0200: adding dma mask 0x10
PNP0200: adding io range 0-0xf, size=0x10, align=0
PNP0200: adding io range 0x81-0x83, size=0x3, align=0
PNP0200: adding io range 0x87-0x87, size=0x1, align=0
PNP0200: adding io range 0x89-0x8b, size=0x3, align=0
PNP0200: adding io range 0x8f-0x91, size=0x3, align=0
PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0
PNP0200: end config
pnpbios: handle 1 device ID PNP0200 (0002d041)
PNP0100: adding irq mask 0x1
PNP0100: adding io range 0x40-0x43, size=0x4, align=0
PNP0100: end config
pnpbios: handle 2 device ID PNP0100 (0001d041)
PNP0b00: adding irq mask 0x100
PNP0b00: adding io range 0x70-0x71, size=0x2, align=0
PNP0b00: end config
pnpbios: handle 3 device ID PNP0b00 (000bd041)
PNP0303: adding irq mask 0x2
PNP0303: adding io range 0x60-0x60, size=0x1, align=0
PNP0303: adding io range 0x64-0x64, size=0x1, align=0
PNP0303: end config
pnpbios: handle 4 device ID PNP0303 (0303d041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0
PNP0800: end config
pnpbios: handle 5 device ID PNP0800 (0008d041)
PNP0c04: adding irq mask 0x2000
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0
PNP0c04: end config
pnpbios: handle 6 device ID PNP0c04 (040cd041)
PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000
PNP0c01: adding fixed memory32 range 0xfffe0000-0xffffffff, size=0x20000
PNP0c01: adding fixed memory32 range 0x100000-0x7ffffff, size=0x7f00000
PNP0c01: end config
pnpbios: handle 7 device ID PNP0c01 (010cd041)
PNP0c02: adding fixed memory32 range 0xf0000-0xf3fff, size=0x4000
PNP0c02: adding fixed memory32 range 0xf4000-0xf7fff, size=0x4000
PNP0c02: adding fixed memory32 range 0xf8000-0xfbfff, size=0x4000
PNP0c02: adding fixed memory32 range 0xfc000-0xfffff, size=0x4000
PNP0c02: end config
pnpbios: handle 8 device ID PNP0c02 (020cd041)
PNP0a03: adding io range 0x4d0-0x4d1, size=0x2, align=0
PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0
PNP0a03: adding io range 0x480-0x48f, size=0x10, align=0
PNP0a03: adding io range 0x4000-0x403f, size=0x40, align=0
PNP0a03: adding io range 0x5000-0x501f, size=0x20, align=0
PNP0a03: end config
pnpbios: handle 9 device ID PNP0a03 (030ad041)
PNP0501: adding irq mask 0x10
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0
PNP0501: end config
pnpbios: handle 10 device ID PNP0501 (0105d041)
PNP0700: adding dma mask 0x4
PNP0700: adding io range 0x3f2-0x3f5, size=0x4, align=0
PNP0700: adding irq mask 0x40
PNP0700: end config
pnpbios: handle 11 device ID PNP0700 (0007d041)
PNP0400: adding irq mask 0x80
PNP0400: adding io range 0x378-0x37f, size=0x8, align=0
PNP0400: end config
pnpbios: handle 12 device ID PNP0400 (0004d041)
PNP0501: adding irq mask 0x8
PNP0501: adding io range 0x2f8-0x2ff, size=0x8, align=0
PNP0501: end config
pnpbios: handle 13 device ID PNP0501 (0105d041)
sc-: sc0 already exists, using sc1 instead
vga-: vga0 already exists, using vga1 instead
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata2 failed to probe at port 0x1f0 irq 14 on isa0
ata3 failed to probe at port 0x170 irq 15 on isa0
adv0 failed to probe on isa0
bt0 failed to probe on isa0
aha0 failed to probe on isa0
aic0 failed to probe on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0067
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0067
psm0: the aux port is not functioning (2).
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0 at vga0
fb0: vga0, vga, type:VGA (5), flags:0x700ff
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
vt0 failed to probe on isa0
pmtimer0 failed to probe on isa0
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sio0: irq maps: 0x41 0x51 0x41 0x41
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: irq maps: 0x41 0x49 0x41 0x41
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
bpf: lp0 attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ed0 failed to probe at port 0x280 iomem 0xd8000 irq 10 on isa0
cs0 failed to probe at port 0x300 on isa0
sn0 failed to probe at port 0x300 irq 10 on isa0
ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10 on isa0
fe0 failed to probe at port 0x300 on isa0
le0 failed to probe at port 0x300 iomem 0xd0000 irq 5 on isa0
lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
pcm0 failed to probe at port 0x530-0x537,0xf8c-0xf94,0xe0e irq 10 drq 1 on isa0
sc1: no video adapter is found.
sc1: <System console> failed to probe on isa0
vga1: <Generic ISA VGA> failed to probe on isa0
isa_probe_children: probing PnP devices
unknown: <PNP0303> can't assign resources
unknown: <PNP0303> at port 0x60 on isa0
pca0: <AT-style speaker sound> at port 0x61 on isa0
unknown: <PNP0501> can't assign resources
unknown: <PNP0501> at port 0x3f8-0x3ff on isa0
unknown: <PNP0700> can't assign resources
unknown: <PNP0700> at port 0x3f2-0x3f5 on isa0
unknown: <PNP0400> can't assign resources
unknown: <PNP0400> at port 0x378-0x37f on isa0
unknown: <PNP0501> can't assign resources
unknown: <PNP0501> at port 0x2f8-0x2ff on isa0
BIOS Geometries:
0:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
bpf: ppp0 attached
IP packet filtering initialized, divert enabled, rule-based forwarding disabled, default to accept, logging limited to 100 packets/entry by default
DUMMYNET initialized (010124)
bpf: lo0 attached
ad0: success setting UDMA2 on Intel chip
Creating DISK ad0
ad0: <IBM-DJNA-351520/J56OA30K> ATA-4 disk at ata0-master
ad0: 14664MB (30033360 sectors), 29795 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA33
ad0: piomode=4 dmamode=2 udmamode=4 cblid=1
ata1-slave: piomode=3 dmamode=-1 udmamode=-1 dmaflag=0
ata1-slave: success setting PIO3 on generic chip
acd0: <FX410A/J05> CDROM drive at ata1 as slave
acd0: read 689KB/s (48501KB/s), 128KB buffer, PIO3
acd0: Reads:
acd0: Writes:
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable trayacd0: Medium: CD-ROM 120mm data disc, unlocked
Mounting root from ufs:/dev/ad0s4a
ad0s1: type 0x6, start 63, end = 1558304, size 1558242 : OK
ad0s2: type 0x5, start 8948205, end = 30025484, size 21077280 : OK
ad0s3: type 0x83, start 1558305, end = 2795309, size 1237005 : OK
ad0s4: type 0xa5, start 2795310, end = 8948204, size 6152895 : OK
ad0s5: type 0x83, start 8948268, end = 9157049, size 208782 : OK
ad0<extended>: type 0x5, start 9157050, end = 12434309, size 3277260 : OK
ad0s6: type 0x6, start 9157113, end = 12434309, size 3277197 : OK
ad0<extended>: type 0x5, start 12434310, end = 16450559, size 4016250 : OK
ad0s7: type 0x6, start 12434373, end = 16450559, size 4016187 : OK
ad0<extended>: type 0x5, start 16450560, end = 22185764, size 5735205 : OK
ad0s8: type 0x83, start 16450623, end = 22185764, size 5735142 : OK
ad0<extended>: type 0x5, start 22185765, end = 22603454, size 417690 : OK
ad0s9: type 0x82, start 22185828, end = 22603454, size 417627 : OK
ad0<extended>: type 0x5, start 22603455, end = 26700029, size 4096575 : OK
ad0s10: type 0x6, start 22603518, end = 26700029, size 4096512 : OK
ad0<extended>: type 0x5, start 26700030, end = 30025484, size 3325455 : OK
ad0s11: type 0x6, start 26700093, end = 30025484, size 3325392 : OK
WARNING: / was not properly dismounted
start_init: trying /sbin/init
Kernel config:
machine i386
cpu I486_CPU
cpu I586_CPU
cpu I686_CPU
ident nn12
makeoptions DEBUG=-g
maxusers 32
hints "GENERIC.hints" #Default places to look for devices.
options INET #InterNETworking
options IPFIREWALL
options IPFIREWALL_VERBOSE
options IPFIREWALL_VERBOSE_LIMIT=100 #limit verbosity
options IPFIREWALL_DEFAULT_TO_ACCEPT #allow everything by default
options IPDIVERT #divert sockets
options TCP_DROP_SYNFIN #drop TCP packets with SYN+FIN
options DUMMYNET
options FFS #Berkeley Fast Filesystem
# options FFS_ROOT #FFS usable as root device [keep this!]
options SOFTUPDATES
options NFS #Network Filesystem
options MSDOSFS #MSDOS Filesystem
options CD9660 #ISO 9660 Filesystem
options PROCFS #Process filesystem
options EXT2FS
options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
options SCSI_DELAY=5000
options MSGBUF_SIZE=81920
options DDB
options USERCONFIG #boot -c editor
options VISUAL_USERCONFIG #visual boot -c editor
options INCLUDE_CONFIG_FILE
options KTRACE #ktrace(1) support
options SYSVSHM #SYSV-style shared memory
options SYSVMSG #SYSV-style message queues
options SYSVSEM #SYSV-style semaphores
options VFS_AIO
options P1003_1B #Posix P1003_1B real-time extensions
options _KPOSIX_PRIORITY_SCHEDULING
options _KPOSIX_VERSION=199309L
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
device random
device isa
device eisa
device pci
#options COMPAT_OLDISA # compatability shims for lnc, fe, le
#options COMPAT_OLDPCI # compatability shims for lnc, vx
# Floppy drives
device fdc
# ATA and ATAPI devices
device ata
device atadisk # ATA disk drives
device atapicd # ATAPI CDROM drives
options ATA_STATIC_ID #Static device numbering
#options ATA_ENABLE_ATAPI_DMA #Enable DMA on ATAPI devices
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc 1
device atkbd
device psm
device vga
options VESA
# splash screen/screen saver
device splash
# syscons is the default console driver, resembling an SCO console
device sc 1
options SC_HISTORY_SIZE=1500 # number of history buffer lines
options SC_MOUSE_CHAR=0x3 # char code for text mode mouse cursor
options SC_KERNEL_CONS_ATTR="(FG_GREEN|BG_BLACK)"
options SC_KERNEL_CONS_REV_ATTR="(FG_BLACK|BG_GREEN)"
# Floating point support - do not disable.
device npx
# Power management support (see LINT for more options)
device apm
# Serial (COM) ports
device sio
# Parallel port
device ppc
device ppbus # Parallel port bus (required)
device lpt # Printer
device plip # TCP/IP over parallel
device ppi # Parallel port interface device
#device vpo # Requires scbus and da
# Pseudo devices - the number indicates how many units to allocated.
device loop # Network loopback
device ether # Ethernet support
device sl # Kernel SLIP
device ppp 1 # Kernel PPP
device tun # Packet tunnel.
device pty 32 # Pseudo-ttys (telnet etc)
device md # Memory "disks"
device speaker
device bpf 2 # Berkeley packet filter
device md 4
device snp
device pcm
device sbc
device pca
device seq
options HZ=300
options NTIMECOUNTER=30
options LIBICONV
options MSGBUF_SIZE=81920
options FB_INSTALL_CDEV # install a CDEV entry in /dev
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010604130541.A612>