Date: Mon, 20 Sep 2004 16:36:53 -0400 From: Adam K Kirchhoff <adamk@voicenet.com> To: Oliver Brandmueller <ob@e-Gitt.NET> Cc: freebsd-current@freebsd.org Subject: Re: SMP problems with -CURRENT? (and BETA5) Message-ID: <414F3F65.9090804@voicenet.com> In-Reply-To: <20040920140744.GC54785@e-Gitt.NET> References: <414EB6CE.3000501@voicenet.com> <414ECAE9.7070909@voicenet.com> <20040920133602.GB54785@e-Gitt.NET> <20040920140744.GC54785@e-Gitt.NET>
next in thread | previous in thread | raw e-mail | index | archive | help
Oliver Brandmueller wrote:
>Hi again.
>
>On Mon, Sep 20, 2004 at 03:36:03PM +0200, Oliver Brandmueller wrote:
>
>
>>I see the same here with my kernel. Apparently I dot not yet try to
>>switch of HTT and stuff like that. This is a Dual Xeon with HTT enabled
>>at the moment.
>>
>>
>
>OK, I had HTT disabled and saw as the last message before hang (on a
>dual Xeon)
>
>SMP: AP CPU #1 Launched!
>
>Now I enabled HTT and the I see:
>
>SMP: AP CPU #1 Launched!
>SMP: AP CPU #2 Launched!
>SMP: AP CPU #3 Launched!
>
>However, booting without ACPI worked. So it seems that this is the
>direction, where we have to look for the problem:
>
>Copyright (c) 1992-2004 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
>FreeBSD 5.3-BETA5 #10: Mon Sep 20 12:59:45 CEST 2004
> root@champagne.eusc.inter.net:/usr/obj/usr/src/sys/CHAMPAGNE
>Timecounter "i8254" frequency 1193182 Hz quality 0
>CPU: Intel(R) Xeon(TM) CPU 2.40GHz (2392.05-MHz 686-class CPU)
> Origin = "GenuineIntel" Id = 0xf29 Stepping = 9
>
>Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
> Hyperthreading: 2 logical CPUs
>real memory = 2146959360 (2047 MB)
>avail memory = 2099662848 (2002 MB)
>MPTable: < SE7501CW2>
>FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
> cpu0 (BSP): APIC ID: 0
> cpu1 (AP): APIC ID: 6
>
>
>Greetings, Oliver
>
>
>
>
Unfortunately, for me booting with acpi disabled leads to:
Fatal trap 9: general protection fault while in kernel mode
cpuid = 0; apic id = 00
instruction pointer = 0x58:0x1023
stack pointer = 0x10:0xf80
frame pointer = 0x10:0x0
code segment = base 0xc00f0000, limit 0xffff, type 0x1b
= DPL 0, pres 1, def32 0, gran 0
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 0 (swapper)
trap number = 9
panic: general protection fault
cpuid = 0
Uptime: 1s
Automatic reboot in 15 seconds - press a key on the console to abort
--> Press a key on the console to reboot,
--> or switch off the system now.
I'm gonna try with HTT disabled in the BIOS next.
Any other ideas?
Adam
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?414F3F65.9090804>