Date: Thu, 24 Jan 2013 10:15:33 -0600 From: Derek Ragona <derek@computinginnovations.com> To: Anton Yuzhaninov <citrin@citrin.ru>, freebsd-questions@freebsd.org Subject: Re: IPMI SOL setup on FreeBSD 9.1 amd64 supermicro X9SCM-F/X9CL-F Message-ID: <6.0.0.22.2.20130124101025.069e9900@mail.computinginnovations.com> In-Reply-To: <kdoub2$r18$1@ger.gmane.org> References: <6.0.0.22.2.20130121123250.067f3158@mail.computinginnovations.com> <kdoub2$r18$1@ger.gmane.org>
next in thread | previous in thread | raw e-mail | index | archive | help
At 09:07 AM 1/23/2013, Anton Yuzhaninov wrote: >On Mon, 21 Jan 2013 22:52:17, Derek Ragona wrote: >DR> I have a couple servers that are built using the supermicro >X9SCM-F/X9CL-F >DR> motherboards, and I can't quite get IPMI SOL working right. >DR> >DR> These motherboards have 3 NIC's. One NIC is for a dedicated IPMI >interface. >DR> >DR> I have both servers configured to use the dedicated IPMI NIC and these >DR> NIC's are plugged into a separate unmanaged switch. >DR> >DR> Both systems boards are set to redirect com1. I changed /etc/ttys to >run a >DR> getty on /dev/ttyu0. I have com1 configured to 115,200 baud, 8, n, 1, no >DR> flowcontrol in the BIOS. I in have /etc/ttys: >DR> ttyu0 "/usr/libexec/getty std.115200" vt100 on secure > >/etc/ttys: >ttyu1 "/usr/libexec/getty std.115200" vt100 on secure > >/boot/loader.conf: >hint.uart.0.flags="0" >hint.uart.1.flags="0x10" >boot_serial="YES" >boot_multicons="YES" >comconsole_speed="115200" >console="comconsole vidconsole" Anton, Thanks for answering. I thought: >/etc/ttys: >ttyu1 "/usr/libexec/getty std.115200" vt100 on secure is for com2? I also thought: hint.uart.1.flags="0x10" Is for com2? you said: hint.uart.1.flags="0x10" Is that for for a serial only console? I read in some posts, to use: hint.uart.1.flags="0x30" for both a local console with a serial console. I could not find much documentation on the uart or sio flags. -Derek -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?6.0.0.22.2.20130124101025.069e9900>