Date: Wed, 30 Oct 1996 20:20:55 +1100 (EST) From: Gavin Cameron <gavin@ormond.unimelb.edu.au> To: hardware@freebsd.org Subject: ZNYX346 and FreeBSD 2.1.5 Message-ID: <199610300920.UAA19628@gateway.ormond.unimelb.edu.au>
next in thread | raw e-mail | index | archive | help
Hi there, Does anyone have a ZNYX346, a 4 port ethernet card based on DEC 21140 chipset, running in a 2.1.5R system? If so how? All ports on the ZYNX refuse to talk after bootup. I have the following cards in a Pentium system * PCI S3 video card as vga0 * PCI SMC8432BT ethernet card as de0 * ZNYX 346 4 port ethernet card as de1 de2 de3 de4 One thing I notice is that the following IRQs are assigned: * vga0 int a irq 9 * de0 int a irq 5 * de1 int a irq 11 * de2 int a irq 9 * de3 int a irq 5 * de4 int a irq 12 After bootup I can use de0, but de1..4 refuse to work. I've tried ifconfiging the interface to use link0, link1 and link2 but still no luck. All ethernet ports will eventually talk at 10MBits. When I boot up I get the following in /var/log/messages: Oct 31 06:10:15 router /kernel: FreeBSD 2.1.5-RELEASE #0: Thu Oct 31 04:37:18 EST 1996 Oct 31 06:10:16 router /kernel: root@router.ormond.unimelb.edu.au:/usr/src/sys/compile/router Oct 31 06:10:16 router /kernel: CPU: 133-MHz Pentium 735\90 or 815\100 (Pentium-class CPU) Oct 31 06:10:16 router /kernel: Origin = "GenuineIntel" Id = 0x52c Stepping=12 Oct 31 06:10:16 router /kernel: Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8> Oct 31 06:10:16 router /kernel: real memory = 16777216 (16384K bytes) Oct 31 06:10:16 router /kernel: avail memory = 14692352 (14348K bytes) Oct 31 06:10:16 router /kernel: Probing for devices on PCI bus 0: Oct 31 06:10:16 router /kernel: chip0 <Intel 82439> rev 1 on pci0:0 Oct 31 06:10:16 router /kernel: chip1 <Intel 82371 PCI-ISA bridge> rev 1 on pci0:7:0 Oct 31 06:10:16 router /kernel: chip2 <Intel 82371 Bus-Master IDE controller> rev 0 on pci0:7:1 Oct 31 06:10:16 router /kernel: chip3 <generic PCI bridge (vendor=1011 device=21 subclass=4)> rev 0 on pci0:15 Oct 31 06:10:17 router /kernel: vga0 <VGA-compatible display device> rev 0 int a irq 9 on pci0:16 Oct 31 06:10:17 router /kernel: de0 <Digital DC21041 Ethernet> rev 17 int a irq 5 on pci0:17 Oct 31 06:10:17 router /kernel: de0: DC21041 [10Mb/s] pass 1.1 Ethernet address 00:00:c0:d8:5f:e8 Oct 31 06:10:17 router /kernel: Probing for devices on PCI bus 1: Oct 31 06:10:17 router /kernel: de1 <Digital DC21140 Fast Ethernet> rev 32 int a irq 11 on pci1:4 Oct 31 06:10:17 router /kernel: de1: DC21140 [10-100Mb/s] pass 2.0 Ethernet address 00:c0:95:e0:02:a0 Oct 31 06:10:17 router /kernel: de1: enabling 100baseTX UTP port Oct 31 06:10:17 router /kernel: de2 <Digital DC21140 Fast Ethernet> rev 32 int a irq 9 on pci1:5 Oct 31 06:10:17 router /kernel: de2: can't read ENET ROM (why=-3) (ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff Oct 31 06:10:17 router /kernel: de2: DC21140 [10-100Mb/s] pass 2.0 Ethernet address unknown Oct 31 06:10:17 router /kernel: de3 <Digital DC21140 Fast Ethernet> rev 32 int a irq 5 on pci1:6 Oct 31 06:10:18 router /kernel: de3: can't read ENET ROM (why=-3) (ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff Oct 31 06:10:18 router /kernel: de3: DC21140 [10-100Mb/s] pass 2.0 Ethernet address unknown Oct 31 06:10:18 router /kernel: de4 <Digital DC21140 Fast Ethernet> rev 32 int a irq 12 on pci1:7 Oct 31 06:10:18 router /kernel: de4: can't read ENET ROM (why=-3) (ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff Oct 31 06:10:18 router /kernel: de4: DC21140 [10-100Mb/s] pass 2.0 Ethernet address unknown Oct 31 06:10:18 router /kernel: Probing for devices on the ISA bus: Oct 31 06:10:18 router /kernel: vt0 at 0x60-0x6f irq 1 on motherboard Oct 31 06:10:18 router /kernel: vt0: unkown s3, 80 col, color, 8 scr, mf2-kbd, [R3.20-b24] Oct 31 06:10:18 router /kernel: lpt0 at 0x378-0x37f irq 7 on isa Oct 31 06:10:18 router /kernel: lpt0: Interrupt-driven port Oct 31 06:10:18 router /kernel: lp0: TCP/IP capable interface Oct 31 06:10:19 router /kernel: sio0 at 0x3f8-0x3ff irq 4 on isa Oct 31 06:10:19 router /kernel: sio0: type 16550A Oct 31 06:10:19 router /kernel: wdc0 at 0x1f0-0x1f7 irq 14 flags 0x80ff80ff on isa Oct 31 06:10:19 router /kernel: wdc0: unit 0 (wd0): <WDC AC21200H>, 32-bit, multi-block-16 Oct 31 06:10:19 router /kernel: wd0: 1222MB (2503872 sectors), 2484 cyls, 16 heads, 63 S/T, 512 B/S Oct 31 06:10:19 router /kernel: fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa Oct 31 06:10:19 router /kernel: fdc0: NEC 72065B Oct 31 06:10:19 router /kernel: fd0: 1.44MB 3.5in Oct 31 06:10:19 router /kernel: npx0 on motherboard Oct 31 06:10:19 router /kernel: npx0: INT 16 interface Oct 31 06:10:19 router /kernel: de0: enabling 10baseT/UTP port -- []-------------------------------------+--------------------------------------[] | Gavin Cameron | Ormond College | | Ph : +61 3 9344 1201 | The University of Melbourne | | Fax : +61 3 9344 1111 | Parkville, Victoria | | Email : gavin@ormond.unimelb.edu.au | Australia, 3052 | []-------------------------------------+--------------------------------------[]
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199610300920.UAA19628>