Date: Tue, 10 Jul 2012 21:13:58 -0400 From: Kim Culhan <w8hdkim@gmail.com> To: Adrian Chadd <adrian@freebsd.org> Cc: freebsd-wireless@freebsd.org Subject: Re: ath not working with r238290 Message-ID: <CAKZxVQU7hHwmNZvs0FRAJ5xY_fjT7JmrUQggy0WUP5OGZt4dGQ@mail.gmail.com> In-Reply-To: <CAJ-VmomZn2u9gCQH_PtiUeik0N-3ktyJmJaq=CYO%2B50o2_q_Vw@mail.gmail.com> References: <CAKZxVQXSLOpOry53tjiF2uiWTYMo3THQaDh4gbFmVkEGWyy11g@mail.gmail.com> <CAJ-VmomZn2u9gCQH_PtiUeik0N-3ktyJmJaq=CYO%2B50o2_q_Vw@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, Jul 10, 2012 at 7:57 PM, Adrian Chadd <adrian@freebsd.org> wrote: > .. hm, what ifconfig commands is 'netif onestart' sending? What do you > have in your rc.conf ? > > I haven't tested AR5212 out, I'll make sure I do that tonight. Thanks muchly, the network from rc.conf: ifconfig_re0="DHCP" gateway_enable="YES" cloned_interfaces="bridge0" ifconfig_wlan0="channel 11" wlans_ath0="wlan0" create_args_wlan0="wlanmode hostap mode 11g" ifconfig_bridge0="inet 10.0.0.3 addm wlan0 addm em0 up" ifconfig_em0="up" hostapd_enable=YES pf_enable="YES" from hostapd.conf interface=wlan0 driver=bsd logger_syslog=-1 logger_syslog_level=0 logger_stdout=-1 logger_stdout_level=0 #debug=3 dump_file=/tmp/hostapd.dump ctrl_interface=/var/run/hostapd ctrl_interface_group=wheel ssid=athssid macaddr_acl=0 auth_algs=1 ieee8021x=0 wpa=2 wpa_passphrase=supersecret wpa_key_mgmt=WPA-PSK wpa_pairwise=CCMP -kim
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAKZxVQU7hHwmNZvs0FRAJ5xY_fjT7JmrUQggy0WUP5OGZt4dGQ>