Date: Fri, 5 Feb 1999 02:42:52 -0400 (AST) From: The Hermit Hacker <scrappy@hub.org> To: freebsd-scsi@FreeBSD.ORG Cc: freebsd-stable@FreeBSD.ORG Subject: CAM problem with 3.0S? Message-ID: <Pine.BSF.4.05.9902050224520.344-300000@thelab.hub.org>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --]
Further to my last, slightly more details to work from...
Attached is from /var/log/messages, basically what gets spewed out when I
type 'tosha -iq'...and dmesg.boot
A few extra details that I just clued into. One thing has changed
recently, I added a 4 gig, UW drive to the system.
My controller is an Adaptec 2940 UW...with the two internal buses (one
68pin, one 50pin?) ... I have both in use...my root drive, and the CD I'm
trying to read from, is on the 50pin..my new 4gig is on the 68pin. I can
access both the root (obviously) and the 4gig drive, just tosha fails on
the CD...
%tosha -iq
error sending SCSI command: Input/output error
the kernel is "fresh" as of about 30minute ago or so, figured I should
bring the 3.0S machine up to date before adding more data...makes no
difference...
Trying to follow things through a little further, I just shut down and
removed the second bus (68pin)...now the CD works again. So, with both
bus's in operation, I can access both hard drives (1 on the 68pin bus, one
on the 50pin bus), but I can't touch the CD on the 50pin bus...if I remove
the 68pin bus/cable, the CD works again...
Anything else that I should be trying?
Marc G. Fournier
Systems Administrator @ hub.org
primary: scrappy@hub.org secondary: scrappy@{freebsd|postgresql}.org
[-- Attachment #2 --]
Feb 5 02:24:16 thelab /kernel: (pass2:ahc0:0:3:0): parity error during Command phase.
Feb 5 02:24:16 thelab /kernel: SEQADDR == 0x156
Feb 5 02:24:16 thelab /kernel: SCSIRATE == 0xf
Feb 5 02:24:16 thelab /kernel: (pass2:ahc0:0:3:0): parity error during Message-Out phase.
Feb 5 02:24:16 thelab /kernel: SEQADDR == 0x156
Feb 5 02:24:16 thelab /kernel: SCSIRATE == 0xf
Feb 5 02:24:16 thelab /kernel: (pass2:ahc0:0:3:0): data overrun detected in Data-In phase. Tag == 0x2b.
Feb 5 02:24:16 thelab /kernel: (pass2:ahc0:0:3:0): Have seen Data Phase. Length = 64. NumSGs = 1.
Feb 5 02:24:16 thelab /kernel: (pass2:ahc0:0:3:0): parity error during Command phase.
Feb 5 02:24:16 thelab /kernel: SEQADDR == 0x156
Feb 5 02:24:16 thelab /kernel: SCSIRATE == 0xf
Feb 5 02:24:16 thelab /kernel: (pass2:ahc0:0:3:0): parity error during Message-Out phase.
Feb 5 02:24:16 thelab /kernel: SEQADDR == 0x155
Feb 5 02:24:16 thelab /kernel: SCSIRATE == 0xf
Feb 5 02:24:17 thelab /kernel: (pass2:ahc0:0:3:0): parity error during Data-In phase.
Feb 5 02:24:17 thelab /kernel: SEQADDR == 0x111
Feb 5 02:24:17 thelab /kernel: SCSIRATE == 0xf
Feb 5 02:24:17 thelab /kernel: (pass2:ahc0:0:3:0): parity error during Command phase.
Feb 5 02:24:17 thelab /kernel: SEQADDR == 0x156
Feb 5 02:24:17 thelab /kernel: SCSIRATE == 0xf
Feb 5 02:24:17 thelab /kernel: (pass2:ahc0:0:3:0): parity error during Message-Out phase.
Feb 5 02:24:17 thelab /kernel: SEQADDR == 0x156
Feb 5 02:24:17 thelab /kernel: SCSIRATE == 0xf
Feb 5 02:24:17 thelab /kernel: (pass2:ahc0:0:3:0): parity error during Data-In phase.
Feb 5 02:24:17 thelab /kernel: SEQADDR == 0x111
Feb 5 02:24:17 thelab /kernel: SCSIRATE == 0xf
Feb 5 02:24:17 thelab /kernel: (pass2:ahc0:0:3:0): parity error during Command phase.
Feb 5 02:24:17 thelab /kernel: SEQADDR == 0x156
Feb 5 02:24:17 thelab /kernel: SCSIRATE == 0xf
Feb 5 02:24:17 thelab /kernel: (pass2:ahc0:0:3:0): parity error during Message-Out phase.
Feb 5 02:24:17 thelab /kernel: SEQADDR == 0x156
Feb 5 02:24:17 thelab /kernel: SCSIRATE == 0xf
Feb 5 02:24:17 thelab /kernel: (pass2:ahc0:0:3:0): parity error during Data-In phase.
Feb 5 02:24:17 thelab /kernel: SEQADDR == 0x111
Feb 5 02:24:17 thelab /kernel: SCSIRATE == 0xf
Feb 5 02:24:17 thelab /kernel: (pass2:ahc0:0:3:0): INQUIRY. CDB: 12 0 0 0 40 0
Feb 5 02:24:17 thelab /kernel: (pass2:ahc0:0:3:0): ABORTED COMMAND asc:48,0
Feb 5 02:24:17 thelab /kernel: (pass2:ahc0:0:3:0): Initiator detected error message received
[-- Attachment #3 --]
Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.0-STABLE #1: Fri Feb 5 02:10:35 AST 1999
root@thelab.hub.org:/usr/src/sys/compile/thelab
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 267274330 Hz
CPU: Pentium II (267.27-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x634 Stepping=4
Features=0x80f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,MMX>
real memory = 134217728 (131072K bytes)
config> quit
avail memory = 128155648 (125152K bytes)
Preloaded elf kernel "kernel" at 0xf0250000.
Probing for devices on PCI bus 0:
chip0: <Host to PCI bridge (vendor=8086 device=7180)> rev 0x03 on pci0.0.0
chip1: <PCI to PCI bridge (vendor=8086 device=7181)> rev 0x03 on pci0.1.0
chip2: <Intel 82371AB PCI to ISA bridge> rev 0x01 on pci0.7.0
chip3: <Intel 82371AB Power management controller> rev 0x01 on pci0.7.3
vx0: <3COM 3C590 Etherlink III PCI> rev 0x00 int a irq 12 on pci0.10.0
utp[*utp*]: disable 'auto select' with DOS util! address 00:20:af:f7:8f:d2
Warning! Defective early revision adapter!
fxp0: <Intel EtherExpress Pro 10/100B Ethernet> rev 0x02 int a irq 9 on pci0.11.0
fxp0: Ethernet address 00:a0:c9:af:0f:58
ahc0: <Adaptec 2940 Ultra SCSI adapter> rev 0x00 int a irq 11 on pci0.12.0
ahc0: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs
Probing for devices on PCI bus 1:
vga0: <VGA-compatible display device> rev 0x04 int a irq 11 on pci1.0.0
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=0x0>
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
psm0 not found
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
fdc0: direction bit not set
fdc0: cmd 3 failed at out byte 1 of 3
fdc0 not found at 0x3f0
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
npx0 on motherboard
npx0: INT 16 interface
IP packet filtering initialized, divert enabled, rule-based forwarding disabled, default to accept, logging disabled
Waiting 15 seconds for SCSI devices to settle
changing root device to da0s1a
(cd0:ahc0:0:3:0): parity error during Data-In phase.
SEQADDR == 0x39
SCSIRATE == 0xf
cd0 at ahc0 bus 0 target 3 lun 0
cd0: <SONY CD-ROM CDU625 1.0r> Removable CD-ROM SCSI-2 device
cd0: 20.0MB/s transfers (20.0MHz, offset 15)
cd0: cd present [290402 x 2048 byte records]
da1 at ahc0 bus 0 target 1 lun 0
da1: <SEAGATE ST15230W 0638> Fixed Direct Access SCSI-2 device
da1: 20.0MB/s transfers (10.0MHz, offset 8, 16bit), Tagged Queueing Enabled
da1: 4095MB (8386733 512 byte sectors: 255H 63S/T 522C)
da0 at ahc0 bus 0 target 0 lun 0
da0: <SEAGATE ST36530N 1281> Fixed Direct Access SCSI-2 device
da0: 20.0MB/s transfers (20.0MHz, offset 15), Tagged Queueing Enabled
da0: 6208MB (12715920 512 byte sectors: 255H 63S/T 791C)
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.05.9902050224520.344-300000>