Date: Fri, 25 Oct 2013 11:02:20 -0500 From: Nathan Whitehorn <nwhitehorn@freebsd.org> To: "A.G. Russell IV" <arussell@agrussell.com> Cc: freebsd-ppc@freebsd.org Subject: Re: System reboots everytime I build something, FreeBSD-9.2-RELEASE-powerpc-disc1.iso Message-ID: <526A960C.2030801@freebsd.org> In-Reply-To: <20131025153121.GB15457@bifrost.agrussell.com> References: <20131024213126.GA15457@bifrost.agrussell.com> <CADyfeQXYAcWnBbpTuL%2BF2N=p5UqMH9%2BdHku4ouLv28q3E2nFjg@mail.gmail.com> <5269EC48.6010306@freebsd.org> <20131025153121.GB15457@bifrost.agrussell.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On 10/25/13 10:31, A.G. Russell IV wrote: > I will put the patch on. > > I've included the fan rpms every 30 seconds from start of build, to reboot. > > A.G. Thanks! Could you also include the output of dev.smusat? That has the CPU thermal sensors. -Nathan > > On Thu, Oct 24, 2013 at 10:58:00PM -0500, Nathan Whitehorn wrote: >> On 10/24/13 22:48, Julio Merino wrote: >>> On Thu, Oct 24, 2013 at 4:31 PM, A.G. Russell IV <arussell@agrussell.com> wrote: >>>> Oct 24 16:18:16 testother kernel: WARNING: Current temperature (CPU A1 DIODE TEMP: 91.1 C) exceeds critical temperature (90.0 C)! Shutting down! >>>> Oct 24 16:18:18 testother kernel: WARNING: Current temperature (CPU A1 DIODE TEMP: 91.1 C) exceeds critical temperature (90.0 C)! Shutting down! >>>> Oct 24 16:18:19 testother kernel: WARNING: Current temperature (CPU A1 DIODE TEMP: 92.2 C) exceeds critical temperature (90.0 C)! Shutting down! >>>> >>>> >>>> Oct 24 16:19:38 testother kernel: cpu0: IBM PowerPC 970MP revision 1.1, 18446744071915.11 MHz >>>> Oct 24 16:19:38 testother kernel: cpu0: Features dc000000<PPC32,PPC64,ALTIVEC,FPU,MMU> >>>> Oct 24 16:19:38 testother kernel: cpu0: HID0 1511081<DEEPNAP,NAP,DPM,NHR,TBEN,ENATTN> >>>> Oct 24 16:19:38 testother kernel: real memory = 2126057472 (2027 MB) >>>> Oct 24 16:19:38 testother kernel: avail memory = 2023890944 (1930 MB) >>>> Oct 24 16:19:38 testother kernel: FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs >>>> >>>> >>>> I can put this system on the Internet if that would help debug this. >>>> >>>> Thank you for your time, >>> See PR powerpc/180593; I've seen similar issues on my PowerMac G5. The >>> attached patch in that PR has fixed them for me. >>> >> Thanks for the reminder and for the patch. I've just committed it to >> HEAD and it should make it in to 10.0. >> >> The readings in the original post look stable however, and very high. >> It's possible the thermal control algorithm needs some tuning for G5 >> quad systems. Do you happen to know what the fans are doing? The quoted >> CPU speed is also extremely suspicious here.... >> -Nathan > ---------------------------sysctl output---------------------------- > Thu Oct 24 16:13:31 CDT 2013 > dev.smu.0.fans.drive_bay_a_intake.rpm: 1154 > dev.smu.0.fans.backside.rpm: 1713 > dev.smu.0.fans.cpu_a_intake.rpm: 786 > dev.smu.0.fans.cpu_b_intake.rpm: 786 > dev.smu.0.fans.cpu_a_exhaust.rpm: 799 > dev.smu.0.fans.cpu_b_exhaust.rpm: 799 > dev.smu.0.fans.cpu_a_pump.rpm: 1512 > dev.smu.0.fans.expansion_slots_intake.rpm: 1709 > Thu Oct 24 16:14:03 CDT 2013 > dev.smu.0.fans.drive_bay_a_intake.rpm: 1148 > dev.smu.0.fans.backside.rpm: 1706 > dev.smu.0.fans.cpu_a_intake.rpm: 782 > dev.smu.0.fans.cpu_b_intake.rpm: 783 > dev.smu.0.fans.cpu_a_exhaust.rpm: 796 > dev.smu.0.fans.cpu_b_exhaust.rpm: 797 > dev.smu.0.fans.cpu_a_pump.rpm: 1504 > dev.smu.0.fans.expansion_slots_intake.rpm: 1703 > Thu Oct 24 16:14:34 CDT 2013 > dev.smu.0.fans.drive_bay_a_intake.rpm: 1149 > dev.smu.0.fans.backside.rpm: 1717 > dev.smu.0.fans.cpu_a_intake.rpm: 783 > dev.smu.0.fans.cpu_b_intake.rpm: 783 > dev.smu.0.fans.cpu_a_exhaust.rpm: 796 > dev.smu.0.fans.cpu_b_exhaust.rpm: 797 > dev.smu.0.fans.cpu_a_pump.rpm: 1500 > dev.smu.0.fans.expansion_slots_intake.rpm: 1707 > Thu Oct 24 16:15:05 CDT 2013 > dev.smu.0.fans.drive_bay_a_intake.rpm: 1183 > dev.smu.0.fans.backside.rpm: 1706 > dev.smu.0.fans.cpu_a_intake.rpm: 877 > dev.smu.0.fans.cpu_b_intake.rpm: 878 > dev.smu.0.fans.cpu_a_exhaust.rpm: 925 > dev.smu.0.fans.cpu_b_exhaust.rpm: 890 > dev.smu.0.fans.cpu_a_pump.rpm: 1591 > dev.smu.0.fans.expansion_slots_intake.rpm: 1740 > Thu Oct 24 16:15:36 CDT 2013 > dev.smu.0.fans.drive_bay_a_intake.rpm: 1161 > dev.smu.0.fans.backside.rpm: 1708 > dev.smu.0.fans.cpu_a_intake.rpm: 795 > dev.smu.0.fans.cpu_b_intake.rpm: 794 > dev.smu.0.fans.cpu_a_exhaust.rpm: 806 > dev.smu.0.fans.cpu_b_exhaust.rpm: 806 > dev.smu.0.fans.cpu_a_pump.rpm: 1500 > dev.smu.0.fans.expansion_slots_intake.rpm: 1715 > Thu Oct 24 16:16:07 CDT 2013 > dev.smu.0.fans.drive_bay_a_intake.rpm: 1263 > dev.smu.0.fans.backside.rpm: 1707 > dev.smu.0.fans.cpu_a_intake.rpm: 1316 > dev.smu.0.fans.cpu_b_intake.rpm: 1315 > dev.smu.0.fans.cpu_a_exhaust.rpm: 1335 > dev.smu.0.fans.cpu_b_exhaust.rpm: 1337 > dev.smu.0.fans.cpu_a_pump.rpm: 1996 > dev.smu.0.fans.expansion_slots_intake.rpm: 1822 > Thu Oct 24 16:16:39 CDT 2013 > dev.smu.0.fans.drive_bay_a_intake.rpm: 1274 > dev.smu.0.fans.backside.rpm: 1708 > dev.smu.0.fans.cpu_a_intake.rpm: 1327 > dev.smu.0.fans.cpu_b_intake.rpm: 1340 > dev.smu.0.fans.cpu_a_exhaust.rpm: 1348 > dev.smu.0.fans.cpu_b_exhaust.rpm: 1349 > dev.smu.0.fans.cpu_a_pump.rpm: 2006 > dev.smu.0.fans.expansion_slots_intake.rpm: 1834 > Thu Oct 24 16:17:10 CDT 2013 > dev.smu.0.fans.drive_bay_a_intake.rpm: 1435 > dev.smu.0.fans.backside.rpm: 1707 > dev.smu.0.fans.cpu_a_intake.rpm: 1644 > dev.smu.0.fans.cpu_b_intake.rpm: 1648 > dev.smu.0.fans.cpu_a_exhaust.rpm: 1684 > dev.smu.0.fans.cpu_b_exhaust.rpm: 1685 > dev.smu.0.fans.cpu_a_pump.rpm: 2315 > dev.smu.0.fans.expansion_slots_intake.rpm: 1992 > Thu Oct 24 16:17:41 CDT 2013 > dev.smu.0.fans.drive_bay_a_intake.rpm: 1465 > dev.smu.0.fans.backside.rpm: 1702 > dev.smu.0.fans.cpu_a_intake.rpm: 2330 > dev.smu.0.fans.cpu_b_intake.rpm: 2335 > dev.smu.0.fans.cpu_a_exhaust.rpm: 2333 > dev.smu.0.fans.cpu_b_exhaust.rpm: 2379 > dev.smu.0.fans.cpu_a_pump.rpm: 2964 > dev.smu.0.fans.expansion_slots_intake.rpm: 2013 > Thu Oct 24 16:18:12 CDT 2013 > dev.smu.0.fans.drive_bay_a_intake.rpm: 1558 > dev.smu.0.fans.backside.rpm: 1693 > dev.smu.0.fans.cpu_a_intake.rpm: 2271 > dev.smu.0.fans.cpu_b_intake.rpm: 2365 > dev.smu.0.fans.cpu_a_exhaust.rpm: 2336 > dev.smu.0.fans.cpu_b_exhaust.rpm: 2344 > dev.smu.0.fans.cpu_a_pump.rpm: 3078 > dev.smu.0.fans.expansion_slots_intake.rpm: 2180 > Thu Oct 24 16:18:20 CDT 2013 > dev.smu.0.fans.drive_bay_a_intake.rpm: 1816 > dev.smu.0.fans.backside.rpm: 1690 > dev.smu.0.fans.cpu_a_intake.rpm: 3014 > dev.smu.0.fans.cpu_b_intake.rpm: 3060 > dev.smu.0.fans.cpu_a_exhaust.rpm: 3034 > dev.smu.0.fans.cpu_b_exhaust.rpm: 3047 > dev.smu.0.fans.cpu_a_pump.rpm: 3517 > dev.smu.0.fans.expansion_slots_intake.rpm: 2359 > > reboot... >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?526A960C.2030801>