Date: Sun, 19 Sep 2004 12:19:53 +0300 From: Ion-Mihai Tetcu <itetcu@people.tecnik93.com> To: freebsd-current@freebsd.org Subject: BETA5 regression - reboots -reproducible Message-ID: <20040919121953.5de84a64@it.buh.tecnik93.com>
index | next in thread | raw e-mail
[-- Attachment #1 --]
Hi,
The "good" news is the it happens every time. The bad one - nothing
logged and no idea what it happens.
My "old" kernel+world was a BETA4 just before the apparition of
debug.witness oids. The new one is:
# uname -a
FreeBSD it.buh.tecnik93.com 5.3-BETA5 FreeBSD 5.3-BETA5 #6: Sat Sep 18 22:55:04 EEST 2004 itetcu@it.buh.tecnik93.com:/usr/obj/usr/src/sys/IT53_b3_df i386
so the time frame is pretty small.
Kernel and world were build with NOCLEAN (I'm rebuilding now after
removing /usr/obj).
The problem:
Each time I try to play a video file with gmplayer or mplayer the system
reboots; no error logged.
This is a ULE, apic, agp kernel, with witness (but running with or without
debug.witness.watch makes no difference) and invariants (see attached
conf file);
root(root)@it> /root [12:08:43] 0 # ll /etc/malloc.conf
lrwxr-xr-x 1 root wheel 2 Sep 7 13:16 /etc/malloc.conf -> aj
An old BETA3 kernel that happens to lay around works.
The only thing I've noticed is that X takes a little longer to load (I
mean the initial X screen with the X mouse cursor stays a few seconds
before turning into KDE start-up screen).
Also running Xorg with or without dri makes no difference.
This is the console dri output when loading X:
pci0: driver added
pci1: driver added
found-> vendor=0x1002, dev=0x4966, revid=0x01
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0087, statreg=0x02b0, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=16
powerspec 2 supports D0 D1 D2 D3 current D0
pci1:0:0: reprobing on driver added
drm0: <ATI Radeon If R250 9000> port 0xc000-0xc0ff mem 0xe1000000-0xe100ffff,0xd
8000000-0xdfffffff irq 16 at device 0.0 on pci1
info: [drm] AGP at 0xd0000000 128MB
info: [drm] Initialized radeon 1.11.0 20020828 on minor 0
agp0: Setting AGP v2 mode 4
info: [drm] Loading R200 Microcode
drm0: [MPSAFE]
*Anything* in order to fix this is very welcome.
Thanks,
--
IOnut
Unregistered ;) FreeBSD "user"
5.3-BETA4 - try `sysctl debug.witness_watch=0`
and prepare to fly :-)
[-- Attachment #2 --]
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.3-BETA5 #6: Sat Sep 18 22:55:04 EEST 2004
itetcu@it.buh.tecnik93.com:/usr/obj/usr/src/sys/IT53_b3_df
WARNING: WITNESS option enabled, expect reduced performance.
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0858000.
Preloaded elf module "/boot/kernel/ipfw.ko" at 0xc0858244.
Preloaded elf module "/boot/kernel/if_xl.ko" at 0xc08582f0.
Preloaded elf module "/boot/kernel/miibus.ko" at 0xc085839c.
Preloaded elf module "/boot/kernel/snd_via8233.ko" at 0xc0858448.
Preloaded elf module "/boot/kernel/sound.ko" at 0xc08584f8.
Preloaded elf module "/boot/kernel/dummynet.ko" at 0xc08585a4.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0858654.
MP Configuration Table version 1.4 found at 0xc00f0d20
Table 'FACP' at 0x3fff3040
Table 'APIC' at 0x3fff6a80
MADT: Found table at 0x3fff6a80
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
ACPI APIC Table: <GBT AWRDACPI>
Calibrating clock(s) ... i8254 clock: 1193258 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1540486681 Hz
CPU: AMD Athlon(tm) XP 1800+ (1540.49-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x662 Stepping = 2
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0400000<AMIE,DSP,3DNow!>
Data TLB: 32 entries, fully associative
Instruction TLB: 16 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 internal cache: 256 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative
real memory = 1073676288 (1023 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c26000 - 0x000000003edbffff, 1041866752 bytes (254362 pages)
avail memory = 1041108992 (992 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f9820
bios32: Entry = 0xf9c90 (c00f9c90) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0x9cc0
pnpbios: Found PnP BIOS data at 0xc00fa710
pnpbios: Entry = f0000:a740 Rev = 1.0
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 0
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: intpin 0 -> ExtINT (edge, high)
ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
ioapic0: intpin 16 -> PCI IRQ 16 (level, low)
ioapic0: intpin 17 -> PCI IRQ 17 (level, low)
ioapic0: intpin 18 -> PCI IRQ 18 (level, low)
ioapic0: intpin 19 -> PCI IRQ 19 (level, low)
ioapic0: intpin 20 -> PCI IRQ 20 (level, low)
ioapic0: intpin 21 -> PCI IRQ 21 (level, low)
ioapic0: intpin 22 -> PCI IRQ 22 (level, low)
ioapic0: intpin 23 -> PCI IRQ 23 (level, low)
MADT: intr override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0: intpin 2 trigger: edge
ioapic0: intpin 2 polarity: high
MADT: intr override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: low
lapic0: Routing NMI -> LINT1
ioapic0 <Version 0.3> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00040010 LDR: 0x01000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
random: <entropy source, Software, Yarrow>
io: <I/O>
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <GBT AWRDACPI> on motherboard
acpi0: [MPSAFE]
pci_open(1): mode 1 addr port (0x0cf8) is 0x80008840
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=31891106)
pcibios: BIOS version 2.10
Found $PIR table, 7 entries at 0xc00fc6c0
PCI-Only Interrupts: 5 10 11
Location Bus Device Pin Link IRQs
slot 1 0 9 A 0x02 3 4 5 6 7 9 10 11 12 14 15
slot 1 0 9 B 0x03 3 4 5 6 7 9 10 11 12 14 15
slot 1 0 9 C 0x04 3 4 5 6 7 9 10 11 12 14 15
slot 1 0 9 D 0x01 3 4 5 6 7 9 10 11 12 14 15
slot 2 0 10 A 0x03 3 4 5 6 7 9 10 11 12 14 15
slot 2 0 10 B 0x04 3 4 5 6 7 9 10 11 12 14 15
slot 2 0 10 C 0x01 3 4 5 6 7 9 10 11 12 14 15
slot 2 0 10 D 0x02 3 4 5 6 7 9 10 11 12 14 15
slot 3 0 11 A 0x04 3 4 5 6 7 9 10 11 12 14 15
slot 3 0 11 B 0x01 3 4 5 6 7 9 10 11 12 14 15
slot 3 0 11 C 0x02 3 4 5 6 7 9 10 11 12 14 15
slot 3 0 11 D 0x03 3 4 5 6 7 9 10 11 12 14 15
slot 4 0 12 A 0x01 3 4 5 6 7 9 10 11 12 14 15
slot 4 0 12 B 0x02 3 4 5 6 7 9 10 11 12 14 15
slot 4 0 12 C 0x03 3 4 5 6 7 9 10 11 12 14 15
slot 4 0 12 D 0x04 3 4 5 6 7 9 10 11 12 14 15
slot 5 0 13 A 0x02 3 4 5 6 7 9 10 11 12 14 15
slot 5 0 13 B 0x03 3 4 5 6 7 9 10 11 12 14 15
slot 5 0 13 C 0x04 3 4 5 6 7 9 10 11 12 14 15
slot 5 0 13 D 0x01 3 4 5 6 7 9 10 11 12 14 15
slot 6 0 19 A 0x03 3 4 5 6 7 9 10 11 12 14 15
slot 6 0 19 B 0x04 3 4 5 6 7 9 10 11 12 14 15
slot 6 0 19 C 0x01 3 4 5 6 7 9 10 11 12 14 15
slot 6 0 19 D 0x02 3 4 5 6 7 9 10 11 12 14 15
embedded 0 1 A 0x01 3 4 5 6 7 9 10 11 12 14 15
embedded 0 1 B 0x02 3 4 5 6 7 9 10 11 12 14 15
embedded 0 1 C 0x03 3 4 5 6 7 9 10 11 12 14 15
embedded 0 1 D 0x04 3 4 5 6 7 9 10 11 12 14 15
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 17 func 0
acpi0: Power Button (fixed)
ACPI timer looks GOOD min = 1, max = 2, width = 1
ACPI timer looks GOOD min = 1, max = 2, width = 1
ACPI timer looks GOOD min = 1, max = 2, width = 1
ACPI timer looks GOOD min = 1, max = 2, width = 1
ACPI timer looks GOOD min = 1, max = 2, width = 1
ACPI timer looks GOOD min = 1, max = 2, width = 1
ACPI timer looks GOOD min = 1, max = 2, width = 1
ACPI timer looks GOOD min = 1, max = 2, width = 1
ACPI timer looks GOOD min = 1, max = 2, width = 1
ACPI timer looks GOOD min = 1, max = 2, width = 1
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
unknown: not probed (disabled)
unknown: not probed (disabled)
cpu0: <ACPI CPU (3 Cx states)> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0x5000-0x500f,0x4080-0x40ff,0x4000-0x407f,0xcf8-0xcff on acpi0
ACPI PCI link initial configuration:
\\_SB_.PCI0.ALKB irq 0: [21] 0+ low,level,sharable 0.16.0
\\_SB_.PCI0.ALKB irq 0: [21] 0+ low,level,sharable 0.16.1
\\_SB_.PCI0.ALKB irq 0: [21] 0+ low,level,sharable 0.16.2
\\_SB_.PCI0.ALKB irq 0: [21] 0+ low,level,sharable 0.16.3
\\_SB_.PCI0.ALKA irq 0: [20] 0+ low,level,sharable 0.17.0
\\_SB_.PCI0.ALKB irq 0: [21] 0+ low,level,sharable 0.17.1
\\_SB_.PCI0.ALKC irq 0: [22] 0+ low,level,sharable 0.17.2
\\_SB_.PCI0.ALKD irq 0: [23] 0+ low,level,sharable 0.17.3
\\_SB_.PCI0.ALKD irq 0: [23] 0+ low,level,sharable 0.18.0
\\_SB_.PCI0.ALKD irq 0: [23] 0+ low,level,sharable 0.18.1
\\_SB_.PCI0.ALKD irq 0: [23] 0+ low,level,sharable 0.18.2
\\_SB_.PCI0.ALKD irq 0: [23] 0+ low,level,sharable 0.18.3
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 3, range 32, base d0000000, size 27, enabled
found-> vendor=0x1106, dev=0x3189, revid=0x00
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2230, cachelnsz=0 (dwords)
lattimer=0x08 (240 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
found-> vendor=0x1106, dev=0xb168, revid=0x00
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x2230, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
map[10]: type 4, range 32, base 0000d000, size 7, enabled
map[14]: type 1, range 32, base e3000000, size 7, enabled
pcib0: matched entry for 0.12.INTA
pcib0: slot 12 INTA hardwired to IRQ 16
found-> vendor=0x10b7, dev=0x9200, revid=0x78
bus=0, slot=12, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x0a (2500 ns), maxlat=0x0a (2500 ns)
intpin=a, irq=16
powerspec 2 supports D0 D1 D2 D3 current D0
found-> vendor=0x1106, dev=0x3177, revid=0x00
bus=0, slot=17, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0087, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 0000e000, size 4, enabled
found-> vendor=0x1106, dev=0x0571, revid=0x06
bus=0, slot=17, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 0000e400, size 8, enabled
pcib0: matched entry for 0.17.INTC (src \\_SB_.PCI0.ALKC)
pcib0: possible interrupts: 22
ACPI PCI link arbitrated settings:
\\_SB_.PCI0.ALKB (references 5, priority 250):
interrupts: 21
penalty: 50
\\_SB_.PCI0.ALKD (references 5, priority 250):
interrupts: 23
penalty: 50
\\_SB_.PCI0.ALKA (references 1, priority 10):
interrupts: 20
penalty: 10
\\_SB_.PCI0.ALKC (references 1, priority 10):
interrupts: 22
penalty: 10
acpi link set: _CRS failed for link \\_SB_.PCI0.ALKC - AE_NULL_ENTRY
acpi link set: curr irq 0 != 22 for \\_SB_.PCI0.ALKC
pcib0: slot 17 INTC routed to irq 22 via \\_SB_.PCI0.ALKC
found-> vendor=0x1106, dev=0x3059, revid=0x50
bus=0, slot=17, func=5
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=22
powerspec 2 supports D0 D1 D2 D3 current D0
agp0: <VIA 8377 (Apollo KT400/KT400A/KT600) host to PCI bridge> mem 0xd0000000-0xd7ffffff at device 0.0 on pci0
agp0: Reserved 0x8000000 bytes for rid 0x10 type 3 at 0xd0000000
agp0: allocating GATT for aperture of size 256M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xc000-0xcfff
pcib1: memory decode 0xe0000000-0xe1ffffff
pcib1: prefetched decode 0xd8000000-0xdfffffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
map[10]: type 3, range 32, base d8000000, size 27, enabled
pcib1: device (null) requested decoded memory range 0xd8000000-0xdfffffff
map[14]: type 4, range 32, base 0000c000, size 8, enabled
pcib1: device (null) requested decoded I/O range 0xc000-0xc0ff
map[18]: type 1, range 32, base e1000000, size 16, enabled
pcib1: device (null) requested decoded memory range 0xe1000000-0xe100ffff
pcib0: matched entry for 0.1.INTA
pcib0: slot 1 INTA hardwired to IRQ 16
pcib1: slot 0 INTA is routed to irq 16
found-> vendor=0x1002, dev=0x4966, revid=0x01
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0087, statreg=0x02b0, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=16
powerspec 2 supports D0 D1 D2 D3 current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xd000-0xd07f mem 0xe3000000-0xe300007f irq 16 at device 12.0 on pci0
xl0: Reserved 0x80 bytes for rid 0x14 type 3 at 0xe3000000
xl0: using memory mapped I/O
xl0: media options word: a
xl0: found MII/AUTO
miibus0: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: OUI 0x00105a, model 0x0000, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: bpf attached
xl0: Ethernet address: 00:0a:5e:1e:84:81
xl0: [MPSAFE]
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 8235 UDMA133 controller> port 0xe000-0xe00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 17.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xe000
ata0: channel #0 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=50
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=50 devices=0x3<ATA_SLAVE,ATA_MASTER>
ata0: [MPSAFE]
ata1: channel #1 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1-slave: stat=0x00 err=0x00 lsb=0x00 msb=0x00
ata1: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ata1: [MPSAFE]
pcm0: <VIA VT8235> port 0xe400-0xe4ff irq 22 at device 17.5 on pci0
pcm0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xe400
pcm0: [GIANT-LOCKED]
pcm0: <Avance Logic ALC650 AC97 Codec (id = 0x414c4720)>
pcm0: Codec features 20 bit DAC, 18 bit ADC, 5 bit master volume, Realtek 3D Stereo Enhancement
pcm0: Primary codec extended features variable rate PCM, double rate PCM, reserved 1, center DAC, surround DAC, LFE DAC, reserved 4
pcm0: sndbuf_setmap 275000, 1000; 0xc2381000 -> 275000
pcm0: sndbuf_setmap 293000, 1000; 0xc237f000 -> 293000
pcm0: sndbuf_setmap 271000, 1000; 0xc237d000 -> 271000
pcm0: sndbuf_setmap 26f000, 1000; 0xc237b000 -> 26f000
pcm0: sndbuf_setmap 2ad000, 1000; 0xc2379000 -> 2ad000
pcm0: sndbuf_setmap 2c3000, 1000; 0xc238f000 -> 2c3000
fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: ic_type 90 part_id 80
fdc0: [MPSAFE]
fdc0: [FAST]
sio0: irq maps: 0xc041 0xc051 0xc041 0xc041
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1: irq maps: 0xc041 0xc049 0xc041 0xc041
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
unknown: not probed (disabled)
ppc0: using extended I/O port range
ppc0: SPP
ppc0 port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
unknown: not probed (disabled)
psmcpnp0 irq 12 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000008, packet size:4
psm0: syncmask:08, syncbits:00
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xccfff on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 1540486681 Hz quality 800
Timecounters tick every 0.833 msec
DUMMYNET initialized (011031)
lo0: bpf attached
ipfw2 initialized, divert disabled, rule-based forwarding disabled, default to deny, logging disabled
cpu0: set speed to 100.0%
acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0%
ata0-slave: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ata0-master: pio=0x0c wdma=0x22 udma=0x46 cable=80pin
ata0-master: setting PIO4 on VIA 8235 chip
ata0-master: setting UDMA133 on VIA 8235 chip
ata0-slave: setting PIO4 on VIA 8235 chip
ata0-slave: setting UDMA100 on VIA 8235 chip
ad0: <Maxtor 6Y120L0/YAR41BW0> ATA-7 disk at ata0-master
ad0: 117246MB (240121728 sectors), 238216 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA133
GEOM: new disk ad0
ar: FreeBSD check1 failed
[0] f:00 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:20964762
[1] f:00 typ:165 s(CHS):1023/255/63 e(CHS):1023/254/63 s:20964825 l:163573830
[2] f:80 typ:165 s(CHS):1023/255/63 e(CHS):1023/254/63 s:184538655 l:20964825
[3] f:00 typ:6 s(CHS):1023/255/63 e(CHS):1023/254/63 s:205503480 l:34604010
GEOM: Configure ad0s1, start 32256 length 10733958144 end 10733990399
GEOM: Configure ad0s2, start 10733990400 length 83749800960 end 94483791359
GEOM: Configure ad0s3, start 94483791360 length 10733990400 end 105217781759
GEOM: Configure ad0s4, start 105217781760 length 17717253120 end 122935034879
ad1: <WDC WD1600JB-00EVA0/15.05R15> ATA-6 disk at ata0-slave
ad1: 152626MB (312579695 sectors), 310098 C, 16 H, 63 S, 512 B
ad1: 16 secs/int, 1 depth queue, UDMA100
ar: FreeBSD check1 failed
GEOM: Configure ad0s1a, start 0 length 268435456 end 268435455
GEOM: Configure ad0s1c, start 0 length 10733958144 end 10733958143
GEOM: Configure ad0s1d, start 268435456 length 1073741824 end 1342177279
GEOM: Configure ad0s1e, start 1342177280 length 9122611200 end 10464788479
GEOM: Configure ad0s1f, start 10464788480 length 269169664 end 10733958143
ata1-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
ATAPI_RESET time = 10us
ata1-master: setting PIO4 on VIA 8235 chip
ata1-master: setting UDMA33 on VIA 8235 chip
acd0: <PLEXTOR DVDR PX-708A/1.06> DVDR drive at ata1 as master
acd0: read 6890KB/s (6890KB/s) write 6890KB/s (6890KB/s), 2048KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
acd0: Writes: CDR, CDRW, DVDR, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
GEOM: Configure ad0s2b, start 0 length 1073741824 end 1073741823
GEOM: Configure ad0s2c, start 0 length 83749800960 end 83749800959
GEOM: Configure ad0s2d, start 1073741824 length 82676059136 end 83749800959
GEOM: Configure ad0s3a, start 0 length 268435456 end 268435455
GEOM: Configure ad0s3c, start 0 length 10733990400 end 10733990399
GEOM: Configure ad0s3d, start 268435456 length 1073741824 end 1342177279
GEOM: Configure ad0s3e, start 1342177280 length 9122611200 end 10464788479
GEOM: Configure ad0s3f, start 10464788480 length 269169664 end 10733958143
GEOM: new disk ad1
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:31455207
[1] f:00 typ:165 s(CHS):485/10/1 e(CHS):249/11/63 s:31455270 l:52404030
[2] f:00 typ:165 s(CHS):1023/0/1 e(CHS):1023/254/63 s:83859300 l:228717405
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad1s1, start 32256 length 16105065984 end 16105098239
GEOM: Configure ad1s2, start 16105098240 length 26830863360 end 42935961599
GEOM: Configure ad1s3, start 42935961600 length 117103311360 end 160039272959
GEOM: Configure ad1s1a, start 0 length 136314880 end 136314879
GEOM: Configure ad1s1b, start 136314880 length 2147483648 end 2283798527
GEOM: Configure ad1s1c, start 0 length 16105065984 end 16105065983
GEOM: Configure ad1s1d, start 2283798528 length 2202009600 end 4485808127
GEOM: Configure ad1s1e, start 4485808128 length 11619257856 end 16105065983
GEOM: Configure ad1s2c, start 0 length 26830863360 end 26830863359
GEOM: Configure ad1s2d, start 8192 length 26830855168 end 26830863359
GEOM: Configure ad1s3c, start 0 length 117103311360 end 117103311359
GEOM: Configure ad1s3d, start 0 length 117103311360 end 117103311359
(probe1:ata0:0:1:0): error 22
(probe1:ata0:0:1:0): Unretryable Error
(probe1:ata0:0:1:0): error 22
(probe1:ata0:0:1:0): Unretryable Error
(probe0:ata0:0:0:0): error 22
(probe0:ata0:0:0:0): Unretryable Error
(probe3:ata1:0:1:0): error 22
(probe3:ata1:0:1:0): Unretryable Error
(probe0:ata0:0:0:0): error 22
(probe0:ata0:0:0:0): Unretryable Error
(probe3:ata1:0:1:0): error 22
(probe3:ata1:0:1:0): Unretryable Error
(probe2:ata1:0:0:0): error 22
(probe2:ata1:0:0:0): Unretryable Error
(probe2:ata1:0:0:0): error 6
(probe2:ata1:0:0:0): Unretryable Error
(probe2:ata1:0:0:0): error 22
(probe2:ata1:0:0:0): Unretryable Error
pass0 at ata1 bus 0 target 0 lun 0
pass0: <PLEXTOR DVDR PX-708A 1.06> Removable CD-ROM SCSI-0 device
pass0: 33.000MB/s transfers
GEOM: new disk cd0
ioapic0: routing intpin 1 (ISA IRQ 1) to cluster 0
ioapic0: routing intpin 3 (ISA IRQ 3) to cluster 0
ioapic0: routing intpin 4 (ISA IRQ 4) to cluster 0
ioapic0: routing intpin 6 (ISA IRQ 6) to cluster 0
ioapic0: routing intpin 7 (ISA IRQ 7) to cluster 0
ioapic0: routing intpin 8 (ISA IRQ 8) to cluster 0
ioapic0: routing intpin 9 (ISA IRQ 9) to cluster 0
ioapic0: routing intpin 12 (ISA IRQ 12) to cluster 0
ioapic0: routing intpin 13 (ISA IRQ 13) to cluster 0
ioapic0: routing intpin 14 (ISA IRQ 14) to cluster 0
ioapic0: routing intpin 15 (ISA IRQ 15) to cluster 0
ioapic0: routing intpin 16 (PCI IRQ 16) to cluster 0
ioapic0: routing intpin 22 (PCI IRQ 22) to cluster 0
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
cd0 at ata1 bus 0 target 0 lun 0
cd0: <PLEXTOR DVDR PX-708A 1.06> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
Mounting root from ufs:/dev/ad0s3a
start_init: trying /sbin/init
[-- Attachment #3 --]
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ../../conf/NOTES and NOTES files.
# If you are in doubt as to the purpose or necessity of a line, check first
# in NOTES.
#
# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.394.2.2 2003/12/07 23:52:53 scottl Exp $
machine i386
#cpu I486_CPU
#cpu I586_CPU
cpu I686_CPU
ident IT53_b3_df
options CPU_ATHLON_SSE_HACK
#To statically compile in device wiring instead of /boot/device.hints
#hints "GENERIC.hints" #Default places to look for devices.
#options SCHED_4BSD #4BSD scheduler
options SCHED_ULE # ULE scheduler
options INET # InterNETworking
options INET6 # IPv6 communications protocols
options FFS # Berkeley Fast Filesystem
options SOFTUPDATES # Enable FFS soft updates support
options UFS_ACL # Support for access control lists
options UFS_DIRHASH # Improve performance on big directories
options MD_ROOT # MD is a potential root device
options NFSCLIENT # Network Filesystem Client
options NFSSERVER # Network Filesystem Server
options NFS_ROOT # NFS usable as /, requires NFSCLIENT
options MSDOSFS # MSDOS Filesystem
options CD9660 # ISO 9660 Filesystem
options PROCFS # Process filesystem (requires PSEUDOFS)
options PSEUDOFS # Pseudo-filesystem framework
options GEOM_GPT # GUID Partition Tables.
options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!]
options COMPAT_FREEBSD4 # Compatible with FreeBSD4
options SCSI_DELAY=15000 # Delay (in ms) before probing SCSI
options KTRACE # ktrace(1) support
options SYSVSHM # SYSV-style shared memory
options SYSVMSG # SYSV-style message queues
options SYSVSEM # SYSV-style semaphores
options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~128k to driver.
options PFIL_HOOKS # pfil(9) framework
options ADAPTIVE_GIANT # Giant mutex is adaptive.
options HZ=1200
#options IPFIREWALL_VERBOSE
# Debugging for use in -current
makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
options BREAK_TO_DEBUGGER
options KDB_TRACE
options KDB # Enable kernel debugger support.
options DDB # Support DDB.
options GDB # Support remote GDB.
options INVARIANTS # Enable calls of extra sanity checking
options INVARIANT_SUPPORT # Extra sanity checks of internal structures,
# required by INVARIANTS
options WITNESS # Enable checks to detect deadlocks and cycles
options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed
# To make an SMP kernel, the next two are needed
#options SMP # Symmetric MultiProcessor Kernel
device apic # I/O APIC
device isa
device eisa
device pci
#device mgadrm
device agp # support several AGP chipsets
#device radeondrm
# Floppy drives
device fdc
# ATA and ATAPI devices
device ata
device atadisk # ATA disk drives
device ataraid # ATA RAID drives
device atapicd # ATAPI CDROM drives
#device atapifd # ATAPI floppy drives
#device atapist # ATAPI tape drives
options ATA_STATIC_ID #Static device numbering
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc # AT keyboard controller
device atkbd # AT keyboard
device psm # PS/2 mouse
device vga # VGA video card driver
device splash # Splash screen and screen saver support
# syscons is the default console driver, resembling an SCO console
device sc
# Enable this for the pcvt (VT220 compatible) console driver
#device vt
#options XSERVER # support for X server on a vt console
#options FAT_CURSOR # start with block cursor
# Floating point support - do not disable.
device npx
# Power management support (see NOTES for more options)
#device apm
# Add suspend/resume support for the i8254.
device pmtimer
# Serial (COM) ports
device sio # 8250, 16[45]50 based serial ports
# Parallel port
device ppc
device ppbus # Parallel port bus (required)
device lpt # Printer
device plip # TCP/IP over parallel
device ppi # Parallel port interface device
#device vpo # Requires scbus and da
# If you've got a "dumb" serial or parallel PCI card that is
# supported by the puc(4) glue driver, uncomment the following
# line to enable it (connects to the sio and/or ppc drivers):
#device puc
# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
#device miibus # MII bus support
#device bfe # Broadcom BCM440x 10/100 ethernet
#device re # RealTek 8139C+/8169/8169S/8110S
#device rl # RealTek 8129/8139
# Pseudo devices - the number indicates how many units to allocate.
device loop # Network loopback
device mem # Memory and kernel memory devices
device io # I/O device
device random # Entropy device
device ether # Ethernet support
#device sl # Kernel SLIP
#device ppp # Kernel PPP
#device tun # Packet tunnel.
device pty # Pseudo-ttys (telnet etc)
#device md # Memory "disks"
#device gif # IPv6 and IPv4 tunneling
#device faith # IPv6-to-IPv4 relaying (translation)
# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
device bpf # Berkeley packet filter
# SCSI peripherals
# for USB and cam
device scbus # SCSI bus (required for SCSI)
device da # Direct Access (disks)
device atapicam
device cd
device pass
# USB support
#device uhci # UHCI PCI->USB interface
#device ohci # OHCI PCI->USB interface
#device usb # USB Bus (required)
#device udbp # USB Double Bulk Pipe devices
#device ugen # Generic
#device uhid # "Human Interface Devices"
#device ukbd # Keyboard
#device ulpt # Printer
#device umass # Disks/Mass storage - Requires scbus and da
#device ums # Mouse
#device urio # Diamond Rio 500 MP3 player
#device uscanner # Scanners
[-- Attachment #4 --]
boot_verbose=1
#debug.witness.watch=0
#hint.acpi.0.disabled=1
hw.ata.wc=0
#hw.ata.ata_dma=0
hw.ata.atapi_dma="1"
snd_via8233_load="YES"
#if_rl_load="YES"
if_xl_load="YES"
ipfw_load="YES"
dummynet_load="YES"
#agp_load="YES"
#radeon_load="YES"
kern.filedelay="15"
kern.dirdelay="14"
kern.metadelay="13"
#bktr_load="YES"
#iicbus_load="YES"
#iicbb_load="YES"
#smbus_load="YES"
help
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040919121953.5de84a64>