Date: Thu, 13 Oct 2005 14:23:28 +0200 From: "Rehsack Jens \(ext\)" <jens.rehsack.ext@siemensvdo.com> To: "M. Warner Losh" <imp@bsdimp.com> Cc: rehsack@liwing.de, current@freebsd.org Subject: RE: Problems with Acer Travelmate & PC-Card interface Message-ID: <CE3682EF98A64140B2BF376C39461E0A02FAFF@krbdf7ma.ww011.siemens.net>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --] -----Original Message----- From: M. Warner Losh [mailto:imp@bsdimp.com] Sent: Friday, October 07, 2005 7:08 PM To: Rehsack Jens (ext) Cc: rehsack@liwing.de; jon@freebsd.org; current@freebsd.org Subject: Re: Problems with Acer Travelmate & PC-Card interface > : > > : Is there a way for me to support you with data or traces to figure > : it > : > > : out? Or do I simply have to wait ... > : > > > : > > If you had the debugging level like I suggested, then I think so. > : You > : > > did run it with hw.cardbus.cis_debug=1, right? > : > > : > Yes, I did. And it adds exactly the 4 lines you've additional in the > : log. > : > > : > > Warner > : > : Any news, Warner? > > No. Hi Warner, but I have. I attach a (stripped) /var/log/messages where I've inserted 2 similar cards. 1st is a UMTS-Card including WLAN-Module and is designed as cardbus card (of course), 2nd is a simple UMTS modem which is a "normal" PC-Card. I hope this will help you make any progress, because it would just be fine when I can start using my hardware without switching to windows ;) Best regards, Jens [-- Attachment #2 --] Oct 13 11:54:06 kermit kernel: Status is 0x30000820 Oct 13 11:54:06 kermit kernel: cbb0: card inserted: event=0x00000000, state=30000820 Oct 13 11:54:06 kermit kernel: cbb0: cbb_power: 3V Oct 13 11:54:06 kermit kernel: cbb0: cbb_power: 0V Oct 13 11:54:45 kermit kernel: Status is 0x30000026 Oct 13 11:55:11 kermit kernel: Status is 0x30000411 Oct 13 11:55:11 kermit kernel: cbb0: card inserted: event=0x00000000, state=30000411 Oct 13 11:55:11 kermit kernel: pccard0: chip_socket_enable Oct 13 11:55:11 kermit kernel: cbb_pcic_socket_enable: Oct 13 11:55:11 kermit kernel: cbb0: cbb_power: 5V Oct 13 11:55:11 kermit kernel: pccard0: read_cis Oct 13 11:55:11 kermit kernel: cis mem map 0xc0210000 (resource: 0xc0210000) Oct 13 11:55:11 kermit kernel: pccard0: CIS tuple chain: Oct 13 11:55:11 kermit kernel: CISTPL_DEVICE type=null speed=null Oct 13 11:55:11 kermit kernel: 01 03 00 00 ff Oct 13 11:55:11 kermit kernel: CISTPL_DEVICE_A type=null speed=null Oct 13 11:55:11 kermit kernel: 17 03 00 00 ff Oct 13 11:55:11 kermit kernel: CISTPL_LONGLINK_MFC 2 attr:4c attr:cb Oct 13 11:55:11 kermit kernel: 06 0b 02 00 4c 00 00 00 00 cb 00 00 00 Oct 13 11:55:11 kermit kernel: CISTPL_MANFID Oct 13 11:55:11 kermit kernel: 20 04 a4 00 76 02 Oct 13 11:55:11 kermit kernel: CISTPL_VERS_1 Oct 13 11:55:11 kermit kernel: 15 2c 06 01 4e 6f 76 61 74 65 6c 20 57 69 72 65 Oct 13 11:55:11 kermit kernel: 6c 65 73 73 00 4d 65 72 6c 69 6e 20 55 4d 54 53 Oct 13 11:55:11 kermit kernel: 20 4d 6f 64 65 6d 00 55 36 33 30 00 00 ff Oct 13 11:55:11 kermit kernel: CISTPL_END Oct 13 11:55:11 kermit kernel: ff Oct 13 11:55:11 kermit kernel: cis mem map c0210000 Oct 13 11:55:11 kermit kernel: CISTPL_LINKTARGET expected, code ff observed Oct 13 11:55:11 kermit kernel: cis mem map c0210000 Oct 13 11:55:11 kermit kernel: CISTPL_FUNCID Oct 13 11:55:11 kermit kernel: 21 02 02 01 Oct 13 11:55:11 kermit kernel: CISTPL_FUNCE Oct 13 11:55:11 kermit kernel: 22 04 00 02 0f 7f Oct 13 11:55:11 kermit kernel: CISTPL_CONFIG Oct 13 11:55:11 kermit kernel: 1a 06 05 05 00 04 63 02 Oct 13 11:55:11 kermit kernel: CISTPL_CFTABLE_ENTRY Oct 13 11:55:11 kermit kernel: 1b 19 c7 01 99 69 55 1d f6 32 2d a3 60 f8 03 07 Oct 13 11:55:11 kermit kernel: 50 ff ff 48 c1 05 43 4f 4d 31 00 Oct 13 11:55:11 kermit kernel: CISTPL_CFTABLE_ENTRY Oct 13 11:55:11 kermit kernel: 1b 12 0f 98 a3 60 f8 02 07 50 ff ff 48 c1 05 43 Oct 13 11:55:11 kermit kernel: 4f 4d 32 00 Oct 13 11:55:11 kermit kernel: CISTPL_CFTABLE_ENTRY Oct 13 11:55:11 kermit kernel: 1b 12 17 98 a3 60 e8 03 07 50 ff ff 48 c1 05 43 Oct 13 11:55:11 kermit kernel: 4f 4d 33 00 Oct 13 11:55:11 kermit kernel: CISTPL_CFTABLE_ENTRY Oct 13 11:55:11 kermit kernel: 1b 12 1f 98 a3 60 e8 02 07 50 ff ff 48 c1 05 43 Oct 13 11:55:11 kermit kernel: 4f 4d 34 00 Oct 13 11:55:11 kermit kernel: CISTPL_CFTABLE_ENTRY Oct 13 11:55:11 kermit kernel: 1b 0e 27 98 23 50 ff ff 48 c1 05 43 4f 4d 78 00 Oct 13 11:55:11 kermit kernel: CISTPL_END Oct 13 11:55:11 kermit kernel: ff Oct 13 11:55:11 kermit kernel: cis mem map c0210000 Oct 13 11:55:11 kermit kernel: CISTPL_FUNCID Oct 13 11:55:11 kermit kernel: 21 02 02 01 Oct 13 11:55:11 kermit kernel: CISTPL_FUNCE Oct 13 11:55:11 kermit kernel: 22 04 00 02 0f 7f Oct 13 11:55:11 kermit kernel: CISTPL_CONFIG Oct 13 11:55:11 kermit kernel: 1a 06 05 0a 20 04 63 02 Oct 13 11:55:11 kermit kernel: CISTPL_CFTABLE_ENTRY Oct 13 11:55:11 kermit kernel: 1b 19 c7 01 99 69 55 1d f6 32 2d a3 60 f8 02 07 Oct 13 11:55:11 kermit kernel: 50 ff ff 48 c1 05 43 4f 4d 36 00 Oct 13 11:55:11 kermit kernel: CISTPL_CFTABLE_ENTRY Oct 13 11:55:11 kermit kernel: 1b 12 0f 98 a3 60 f8 03 07 50 ff ff 48 c1 05 43 Oct 13 11:55:11 kermit kernel: 4f 4d 37 00 Oct 13 11:55:11 kermit kernel: CISTPL_CFTABLE_ENTRY Oct 13 11:55:11 kermit kernel: 1b 12 17 98 a3 60 e8 02 07 50 ff ff 48 c1 05 43 Oct 13 11:55:11 kermit kernel: 4f 4d 38 00 Oct 13 11:55:11 kermit kernel: CISTPL_CFTABLE_ENTRY Oct 13 11:55:11 kermit kernel: 1b 12 1f 98 a3 60 e8 03 07 50 ff ff 48 c1 05 43 Oct 13 11:55:11 kermit kernel: 4f 4d 39 00 Oct 13 11:55:11 kermit kernel: CISTPL_CFTABLE_ENTRY Oct 13 11:55:11 kermit kernel: 1b 0e 27 98 23 50 ff ff 48 c1 05 43 4f 4d 79 00 Oct 13 11:55:11 kermit kernel: CISTPL_END Oct 13 11:55:11 kermit kernel: ff Oct 13 11:55:11 kermit kernel: pccard0: check_cis_quirks Oct 13 11:55:11 kermit kernel: pccard0: CIS version PC Card Standard 6.1 Oct 13 11:55:11 kermit kernel: pccard0: CIS info: Novatel Wireless, Merlin UMTS Modem, U630, Oct 13 11:55:11 kermit kernel: pccard0: Manufacturer code 0xa4, product 0x276 Oct 13 11:55:11 kermit kernel: pccard0: function 0: serial port, ccr addr 400 mask 263 Oct 13 11:55:11 kermit kernel: pccard0: function 0, config table entry 7: I/O card; irq mask ffff; iomask 3, iospace 3f8-3ff; io8 irqpulse audio Oct 13 11:55:11 kermit kernel: pccard0: function 0, config table entry 15: I/O card; irq mask ffff; iomask 3, iospace 2f8-2ff; io8 irqpulse audio Oct 13 11:55:11 kermit kernel: pccard0: function 0, config table entry 23: I/O card; irq mask ffff; iomask 3, iospace 3e8-3ef; io8 irqpulse audio Oct 13 11:55:11 kermit kernel: pccard0: function 0, config table entry 31: I/O card; irq mask ffff; iomask 3, iospace 2e8-2ef; io8 irqpulse audio Oct 13 11:55:11 kermit kernel: pccard0: function 0, config table entry 39: I/O card; irq mask ffff; iomask 3, iospace 0-7; io8 irqpulse audio Oct 13 11:55:11 kermit kernel: pccard0: function 1: serial port, ccr addr 420 mask 263 Oct 13 11:55:11 kermit kernel: pccard0: function 1, config table entry 7: I/O card; irq mask ffff; iomask 3, iospace 2f8-2ff; io8 irqpulse audio Oct 13 11:55:11 kermit kernel: pccard0: function 1, config table entry 15: I/O card; irq mask ffff; iomask 3, iospace 3f8-3ff; io8 irqpulse audio Oct 13 11:55:11 kermit kernel: pccard0: function 1, config table entry 23: I/O card; irq mask ffff; iomask 3, iospace 2e8-2ef; io8 irqpulse audio Oct 13 11:55:11 kermit kernel: pccard0: function 1, config table entry 31: I/O card; irq mask ffff; iomask 3, iospace 3e8-3ef; io8 irqpulse audio Oct 13 11:55:11 kermit kernel: pccard0: function 1, config table entry 39: I/O card; irq mask ffff; iomask 3, iospace 0-7; io8 irqpulse audio Oct 13 11:55:11 kermit kernel: pccard0: functions scanning Oct 13 11:55:11 kermit kernel: pccard0: Card has 2 functions. pccard_mfc is 1 Oct 13 11:55:11 kermit kernel: pccard0: I/O rid 0 start 3f8 end 3ff Oct 13 11:55:11 kermit kernel: cbb_pcic_socket_enable: Oct 13 11:55:11 kermit kernel: cbb0: cbb_power: 0V Oct 13 11:55:11 kermit kernel: cbb0: cbb_power: 5V Oct 13 11:55:11 kermit kernel: pccard0: ccr_res == c020b000-c020bfff, base=400 Oct 13 11:55:11 kermit kernel: unknown: MFC: I/O base 0 IOSIZE 0x1 Oct 13 11:55:11 kermit kernel: pccard0: function 0 CCR at 0 offset 400: 47 28 0 0, 0 0 0 0, 0 Oct 13 11:55:11 kermit kernel: pccard0: function 1 CCR at 0 offset 0: 0 0 0 0, 0 0 0 0, 0 Oct 13 11:55:11 kermit kernel: sio4: <Novatel Wireless Merlin UMTS Modem> at port 0x3f8-0x3ff irq 20 function 0 config 7 on pccard0 Oct 13 11:55:11 kermit kernel: sio4: MFC: I/O base 0x3f8 IOSIZE 0x8 Oct 13 11:55:11 kermit kernel: sio4: MFC: I/O base 0x3f8 IOSIZE 0x8 Oct 13 11:55:11 kermit kernel: sio4: type 16550A Oct 13 11:55:11 kermit kernel: sio4: unable to activate interrupt in fast mode - using normal mode Oct 13 11:55:11 kermit kernel: pccard0: function 0 CCR at 0 offset 400 mask 263: 47 28 0 0, f8 3 0 0, 7 Oct 13 11:55:11 kermit kernel: pccard0: I/O rid 0 start 2f8 end 2ff Oct 13 11:55:11 kermit kernel: pccard0: Allocation failed for cfe 7 Oct 13 11:55:11 kermit kernel: pccard0: I/O rid 0 start 3f8 end 3ff Oct 13 11:55:11 kermit kernel: pccard0: Allocation failed for cfe 15 Oct 13 11:55:11 kermit kernel: pccard0: I/O rid 0 start 2e8 end 2ef Oct 13 11:55:11 kermit kernel: pccard0: ccr_res == c020c000-c020cfff, base=420 Oct 13 11:55:11 kermit kernel: unknown: MFC: I/O base 0 IOSIZE 0x1 Oct 13 11:55:11 kermit kernel: pccard0: function 0 CCR at 0 offset 400: 47 28 0 0, f8 3 0 0, 7 Oct 13 11:55:11 kermit kernel: pccard0: function 1 CCR at 0 offset 420: 57 28 0 0, 0 0 0 0, 0 Oct 13 11:55:11 kermit kernel: sio5: <Novatel Wireless Merlin UMTS Modem> at port 0x2e8-0x2ef irq 20 function 1 config 23 on pccard0 Oct 13 11:55:11 kermit kernel: sio5: MFC: I/O base 0x2e8 IOSIZE 0x8 Oct 13 11:55:11 kermit kernel: sio5: MFC: I/O base 0x2e8 IOSIZE 0x8 Oct 13 11:55:11 kermit kernel: sio5: type 16550A Oct 13 11:55:11 kermit kernel: sio5: unable to activate interrupt in fast mode - using normal mode Oct 13 11:55:11 kermit kernel: pccard0: function 1 CCR at 0 offset 420 mask 263: 57 28 0 0, e8 2 0 0, 7 Oct 13 11:55:14 kermit kernel: ACPI-0501: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE Oct 13 11:55:14 kermit kernel: ACPI-1304: *** Error: Method execution failed [\_SB_.PCI0.LPC0.EC0_.GBIF] (Node 0xffffff00008d9240), AE_NO_HARDWARE_RESPONSE Oct 13 11:55:14 kermit kernel: ACPI-1304: *** Error: Method execution failed [\_SB_.PCI0.LPC0.EC0_.BAT0._BIF] (Node 0xffffff00008d8dc0), AE_NO_HARDWARE_RESPONSE Oct 13 11:55:20 kermit kernel: Status is 0x30000016 Oct 13 11:55:20 kermit kernel: All threads purged from cuad4 Oct 13 11:55:20 kermit kernel: All threads purged from ttyd4 Oct 13 11:55:20 kermit kernel: sio4: detached Oct 13 11:55:20 kermit kernel: All threads purged from cuad5 Oct 13 11:55:20 kermit kernel: All threads purged from ttyd5 Oct 13 11:55:20 kermit kernel: sio5: detached Oct 13 11:55:20 kermit kernel: cbb_pcic_socket_disable
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CE3682EF98A64140B2BF376C39461E0A02FAFF>