Date: Thu, 09 Nov 1995 11:16:15 -0600 From: "Eric L. Hernes" <erich@lodgenet.com> To: "Eric L. Hernes" <erich@lodgenet.com> Cc: se@ZPR.Uni-Koeln.DE (Stefan Esser), hackers@freebsd.org Subject: Re: compaq's builtin pci bus Message-ID: <199511091716.LAA09270@jake.lodgenet.com> In-Reply-To: Your message of "Wed, 08 Nov 1995 16:36:53 CST." <199511082236.QAA01253@jake.lodgenet.com>
next in thread | previous in thread | raw e-mail | index | archive | help
>Stefan Esser writes:
>>On Nov 8, 13:14, "Eric L. Hernes" wrote:
>>
>>Well, I tried to get the -current PCI probe code into 2.1R
>>many weeks ago, but it was decided, it was to dangerous with
>>the release expected a few days later ... :)
>>
>>I really would like to know, whether it works with the most
>>recent SNAP, or only with -current ...
>>
here's the probes from the latest snap and -current:
2.1.0-951104-SNAP:
npx0 on motherboard
npx0: INT 16 interface
sb0 at 0x220 irq 7 drq 1 on isa
sb0: <SoundBlaster 2.2>
pcibus_setup(1): mode1res=0x8000000c (0x80000000), mode2res=0x0c (0x0e)
BIOS Geometries:
0:037f0e3e 0..895=896 cylinders, 0..14=15 heads, 1..62=62 sectors
1:03d90b23 0..985=986 cylinders, 0..11=12 heads, 1..35=35 sectors
0 accounted for
wd0s1: type 0xa5, start 62, end = 613799, size 613738 : OK
wd1s1: type 0xa5, start 35, end = 415379, size 415345 : OK
-current:
npx0 on motherboard
npx0: INT 16 interface
sb0 at 0x220 irq 7 drq 1 on isa
sb0: <SoundBlaster 2.2>
imasks: bio c0004040, tty c0031212, net c0031212
pcibus_setup(1): mode 1 addr port (0x0cf8) is 0x00000000
pcibus_setup(1a): mode1res=0x00000000 (0x80000000)
pcibus_setup(1b): mode1res=0x80000000 (0xff000001)
pcibus_check: device 0 is there (id=20000e11)
Probing for devices on the PCI bus:
configuration mode 1 allows 32 devices.
pci0:0: Compaq, device=0x2000, class=old (misc) [no driver assigned]
map(10): mem32(1aa590)
map(14): mem32(1aa590)
map(18): mem32(1aa590)
map(1c): mem32(1aa590)
map(20): io(20000e10)
vga0 <VGA-compatible display device> rev 142 int a irq 11 on pci0:10
mapreg[10] type=0 addr=40000000 size=1000000.
pci0:11: AMD, device=0x2000, class=network (ethernet) [no driver assigned]
pci0:15: Compaq, device=0x0002, class=bridge (isa) [no driver assigned]
pci0: uses 16777216 bytes of memory from 40000000 upto 40ffffff.
wd0s1: type 0xa5, start 62, end = 613799, size 613738 : OK
on the lnc0 card:
with
device lnc0 at isa? port 0x7000 net irq 10 drq 0 vector lncintr
in the config file, the card is recognized as being on
the VL-bus, and the ifconfig returns `Initialisation failed'
>>Regards, STefan
>>
>>
>>--
>> Stefan Esser, Zentrum fuer Paralleles Rechnen Tel: +49 221
> 4706021
>> Universitaet zu Koeln, Weyertal 80, 50931 Koeln FAX: +49 221 4705160
>> ============================================================================
>=
>>=
>> http://www.zpr.uni-koeln.de/~se <se@ZPR.Uni-Koeln.DE>
>
thanks,
eric.
--
erich@lodgenet.com
erich@rrnet.com
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199511091716.LAA09270>