Date: Tue, 13 Sep 2016 17:21:33 +0000 (UTC) From: John Baldwin <jhb@FreeBSD.org> To: src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-stable@freebsd.org, svn-src-stable-11@freebsd.org Subject: svn commit: r305776 - stable/11/share/man/man4 Message-ID: <201609131721.u8DHLXgj068934@repo.freebsd.org>
next in thread | raw e-mail | index | archive | help
Author: jhb Date: Tue Sep 13 17:21:32 2016 New Revision: 305776 URL: https://svnweb.freebsd.org/changeset/base/305776 Log: MFC 305624: Document PCI_HP and PCI_IOV kernel options and various tunables in pci(4). Describe PCI-related kernel options for HotPlug and SR-IOV support in the pci(4) manual page. While here, add a section describing the various tunables supported by the PCI bus driver as well. Modified: stable/11/share/man/man4/pci.4 Directory Properties: stable/11/ (props changed) Modified: stable/11/share/man/man4/pci.4 ============================================================================== --- stable/11/share/man/man4/pci.4 Tue Sep 13 16:33:33 2016 (r305775) +++ stable/11/share/man/man4/pci.4 Tue Sep 13 17:21:32 2016 (r305776) @@ -24,21 +24,47 @@ .\" .\" $FreeBSD$ .\" -.Dd January 3, 2008 +.Dd September 8, 2016 .Dt PCI 4 .Os .Sh NAME .Nm pci -.Nd generic PCI driver +.Nd generic PCI bus driver .Sh SYNOPSIS +To compile the PCI bus driver into the kernel, +place the following line in your +kernel configuration file: +.Bd -ragged -offset indent .Cd device pci +.Ed +.Pp +To compile in support for Single Root I/O Virtualization +.Pq SR-IOV : +.Bd -ragged -offset indent +.Cd options PCI_IOV +.Ed +.Pp +To compile in support for native PCI-express HotPlug: +.Bd -ragged -offset indent +.Cd options PCI_HP +.Ed .Sh DESCRIPTION The .Nm -driver provides a way for userland programs to read and write +driver provides support for +.Tn PCI +devices in the kernel and limited access to +.Tn PCI +devices for userland. +.Pp +The +.Nm +driver provides a +.Pa /dev/pci +character device that can be used by userland programs to read and write .Tn PCI configuration registers. -It also provides a way for userland programs to get a list of all +Programs can also use this device to get a list of all .Tn PCI devices, or all .Tn PCI @@ -73,14 +99,13 @@ children when .Tn PCI client drivers are dynamically loaded at runtime. -.Sh KERNEL CONFIGURATION -The -.Nm -device is included in the kernel as described in the SYNOPSIS section. The .Nm -driver cannot be built as a -.Xr kld 4 . +driver also includes support for PCI-PCI bridges, +various platform-specific Host-PCI bridges, +and basic support for +.Tn PCI +VGA adapters. .Sh IOCTLS The following .Xr ioctl 2 @@ -310,6 +335,164 @@ reading registers, above, also apply to .Tn PCI configuration registers. .El +.Sh LOADER TUNABLES +Tunables can be set at the +.Xr loader 8 +prompt before booting the kernel, or stored in +.Xr loader.conf 5 . +The current value of these tunables can be examined at runtime via +.Xr sysctl 8 +nodes of the same name. +Unless otherwise specified, +each of these tunables is a boolean that can be enabled by setting the +tunable to a non-zero value. +.Bl -tag -width indent +.It Va hw.pci.clear_bars Pq Defaults to 0 +Ignore any firmware-assigned memory and I/O port resources. +This forces the +.Tn PCI +bus driver to allocate resource ranges for memory and I/O port resources +from scratch. +.It Va hw.pci.clear_buses Pq Defaults to 0 +Ignore any firmware-assigned bus number registers in PCI-PCI bridges. +This forces the +.Tn PCI +bus driver and PCI-PCI bridge driver to allocate bus numbers for secondary +buses behind PCI-PCI bridges. +.It Va hw.pci.clear_pcib Pq Defaults to 0 +Ignore any firmware-assigned memory and I/O port resource windows in PCI-PCI +bridges. +This forces the PCI-PCI bridge driver to allocate memory and I/O port resources +for resource windows from scratch. +.Pp +By default the PCI-PCI bridge driver will allocate windows that +contain the firmware-assigned resources devices behind the bridge. +In addition, the PCI-PCI bridge driver will suballocate from existing window +regions when possible to satisfy a resource request. +As a result, +both +.Va hw.pci.clear_bars +and +.Va hw.pci.clear_pcib +must be enabled to fully ignore firmware-supplied resource assignments. +.It Va hw.pci.default_vgapci_unit Pq Defaults to -1 +By default, +the first +.Tn PCI +VGA adapter encountered by the system is assumed to be the boot display device. +This tunable can be set to choose a specific VGA adapter by specifying the +unit number of the associated +.Va vgapci Ns Ar X +device. +.It Va hw.pci.do_power_nodriver Pq Defaults to 0 +Place devices into a low power state +.Pq D3 +when a suitable device driver is not found. +Can be set to one of the following values: +.Bl -tag -width indent +.It 3 +Powers down all +.Tn PCI +devices without a device driver. +.It 2 +Powers down most devices without a device driver. +PCI devices with the display, memory, and base peripheral device classes +are not powered down. +.It 1 +Similar to a setting of 2 except that storage controllers are also not +powered down. +.It 0 +All devices are left fully powered. +.El +.Pp +A +.Tn PCI +device must support power management to be powered down. +Placing a device into a low power state may not reduce power consumption. +.It Va hw.pci.do_power_resume Pq Defaults to 1 +Place +.Tn PCI +devices into the fully powered state when resuming either the system or an +individual device. +Setting this to zero is discouraged as the system will not attempt to power +up non-powered PCI devices after a suspend. +.It Va hw.pci.do_power_suspend Pq Defaults to 1 +Place +.Tn PCI +devices into a low power state when suspending either the system or individual +devices. +Normally the D3 state is used as the low power state, +but firmware may override the desired power state during a system suspend. +.It Va hw.pci.enable_ari Pq Defaults to 1 +Enable support for PCI-express Alternative RID Interpretation. +This is often used in conjunction with SR-IOV. +.It Va hw.pci.enable_io_modes Pq Defaults to 1 +Enable memory or I/O port decoding in a PCI device's command register if it has +firmware-assigned memory or I/O port resources. +The firmware +.Pq BIOS +in some systems does not enable memory or I/O port decoding for some devices +even when it has assigned resources to the device. +This enables decoding for such resources during bus probe. +.It Va hw.pci.enable_msi Pq Defaults to 1 +Enable support for Message Signalled Interrupts +.Pq MSI . +MSI interrupts can be disabled by setting this tunable to 0. +.It Va hw.pci.enable_msix Pq Defaults to 1 +Enable support for extended Message Signalled Interrupts +.Pq MSI-X . +MSI-X interrupts can be disabled by setting this tunable to 0. +.It Va hw.pci.enable_pcie_hp Pq Defaults to 1 +Enable support for native PCI-express HotPlug. +.It Va hw.pci.honor_msi_blacklist Pq Defaults to 1 +MSI and MSI-X interrupts are disabled for certain chipsets known to have +broken MSI and MSI-X implementations when this tunable is set. +It can be set to zero to permit use of MSI and MSI-X interrupts if the +chipset match is a false positive. +.It Va hw.pci.iov_max_config Pq Defaults to 1MB +The maximum amount of memory permitted for the configuration parameters +used when creating Virtual Functions via SR-IOV. +This tunable can also be changed at runtime via +.Xr sysctl 8 . +.It Va hw.pci.realloc_bars Pq Defaults to 0 +Attempt to allocate a new resource range during the initial device scan +for any memory or I/O port resources with firmware-assigned ranges that +conflict with another active resource. +.It Va hw.pci.usb_early_takeover Pq Defaults to 1 on Tn amd64 and Tn i386 +Disable legacy device emulation of USB devices during the initial device +scan. +Set this tunable to zero to use USB devices via legacy emulation when +using a custom kernel without USB controller drivers. +.It Va hw.pci<D>.<B>.<S>.INT<P>.irq +These tunables can be used to override the interrupt routing for legacy +PCI INTx interrupts. +Unlike other tunables in this list, +these do not have corresponding sysctl nodes. +The tunable name includes the address of the PCI device as well as the +pin of the desired INTx IRQ to override: +.Bl -tag -width indent +.It <D> +The domain +.Pq or segment +of the PCI device in decimal. +.It <B> +The bus address of the PCI device in decimal. +.It <S> +The slot of the PCI device in decimal. +.It <P> +The interrupt pin of the PCI slot to override. +One of +.Ql A , +.Ql B , +.Ql C , +or +.Ql D . +.El +.Pp +The value of the tunable is the raw IRQ value to use for the INTx interrupt +pin identified by the tunable name. +Mapping of IRQ values to platform interrupt sources is machine dependent. +.El .Sh FILES .Bl -tag -width /dev/pci -compact .It Pa /dev/pci
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201609131721.u8DHLXgj068934>