Date: Wed, 21 Dec 2005 23:15:30 +0100 From: Juergen Lock <nox@jelal.kn-bremen.de> To: freebsd-stable@freebsd.org Subject: cdboot troubles; 6.0 kernel hanging Message-ID: <20051221221530.GA2390@saturn.kn-bremen.de>
next in thread | raw e-mail | index | archive | help
I have this box that apparently no longer likes FreeBSD's cdboot, it prints something about BOOT/LOADER and then just reboots. Any ideas how to debug something like that? The box already has FreeBSD installed (5.3 with some patches), and i tried copying the 6.0 kernel from disc1 and loading it manually at the loader prompt. It hangs after printing (boot -v): GEOM: new disk ad0 GEOM: new disk ad4 ad0 is on oboard pata (the board is a via kt400), ad4 is a single disk on a Promise Fasttrack tx2200 sata controller. I guess i could try to build a 6.0 kernel with ddb, but what would i be looking for then to find out why its hanging? I'll append 5.3's boot -v dmesg. (btw i see a lot more of the ata4-master: stat=0xa0 err=0xa0 lsb=0xa0 msb=0xa0 lines with the 6.0 kernel than with 5.3...) Thanx, Juergen -------snip---- penalty: 480 480 530 5480 5480 5480 5480 5480 50480 50480100480 pcib0: slot 9 INTA routed to irq 11 via \\_SB_.PCI0.LNKB found-> vendor=0x105a, dev=0x3571, revid=0x02 bus=0, slot=9, func=0 class=01-04-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0230, cachelnsz=1 (dwords) lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x12 (4500 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D3 current D0 map[10]: type 1, range 32, base e8120000, size 17, enabled map[14]: type 1, range 32, base e8140000, size 17, enabled map[18]: type 4, range 32, base 0000a800, size 6, enabled pcib0: matched entry for 0.10.INTA (src \\_SB_.PCI0.LNKC) pcib0: possible interrupts: 1 3 4 5 6 7 10 11 12 14 15 ACPI PCI link arbitrated settings: \\_SB_.PCI0.LNKA (references 12, priority 257160): interrupts: 10 5 11 12 7 6 4 3 15 14 1 penalty: 960 1010 1080 5960 5960 5960 5960 5960 50960 50960100960 \\_SB_.PCI0.LNKC (references 12, priority 257160): interrupts: 10 5 11 12 7 6 4 3 15 14 1 penalty: 960 1010 1080 5960 5960 5960 5960 5960 50960 50960100960 \\_SB_.PCI0.LNKD (references 12, priority 257160): interrupts: 10 5 11 12 7 6 4 3 15 14 1 penalty: 960 1010 1080 5960 5960 5960 5960 5960 50960 50960100960 pcib0: slot 10 INTA routed to irq 10 via \\_SB_.PCI0.LNKC found-> vendor=0x8086, dev=0x1076, revid=0x00 bus=0, slot=10, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0230, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type 4, range 32, base 0000ac00, size 8, enabled map[14]: type 1, range 32, base e8181000, size 8, enabled map[18]: type 1, range 32, base e8182000, size 12, enabled pcib0: matched entry for 0.11.INTA (src \\_SB_.PCI0.LNKD) pcib0: possible interrupts: 1 3 4 5 6 7 10 11 12 14 15 ACPI PCI link arbitrated settings: \\_SB_.PCI0.LNKA (references 12, priority 263050): interrupts: 5 11 10 12 7 6 4 3 15 14 1 penalty: 1490 1560 1560 6440 6440 6440 6440 6440 51440 51440101440 \\_SB_.PCI0.LNKD (references 12, priority 263050): interrupts: 5 11 10 12 7 6 4 3 15 14 1 penalty: 1490 1560 1560 6440 6440 6440 6440 6440 51440 51440101440 pcib0: slot 11 INTA routed to irq 11 via \\_SB_.PCI0.LNKD found-> vendor=0x1000, dev=0x000f, revid=0x26 bus=0, slot=11, func=0 class=01-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x11 (4250 ns), maxlat=0x40 (16000 ns) intpin=a, irq=11 powerspec 1 supports D0 D3 current D0 pci0:12:0: Transition from D2 to D0 map[10]: type 4, range 32, base 0000b000, size 6, enabled pcib0: matched entry for 0.12.INTA (src \\_SB_.PCI0.LNKA) pcib0: possible interrupts: 1 3 4 5 6 7 10 11 12 14 15 ACPI PCI link arbitrated settings: \\_SB_.PCI0.LNKA (references 12, priority 268941): interrupts: 5 10 11 12 7 6 4 3 15 14 1 penalty: 1970 2040 2160 6920 6920 6920 6920 6920 51920 51920101920 pcib0: slot 12 INTA routed to irq 10 via \\_SB_.PCI0.LNKA found-> vendor=0x1274, dev=0x1371, revid=0x08 bus=0, slot=12, func=0 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0105, statreg=0x0410, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x0c (3000 ns), maxlat=0x80 (32000 ns) intpin=a, irq=10 powerspec 1 supports D0 D2 D3 current D0 map[20]: type 4, range 32, base 0000b400, size 5, enabled pcib0: matched entry for 0.16.INTA (src \\_SB_.PCI0.LNKA) pcib0: slot 16 INTA is already routed to irq 10 found-> vendor=0x1106, dev=0x3038, revid=0x80 bus=0, slot=16, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[20]: type 4, range 32, base 0000b800, size 5, enabled pcib0: matched entry for 0.16.INTB (src \\_SB_.PCI0.LNKB) pcib0: slot 16 INTB is already routed to irq 11 found-> vendor=0x1106, dev=0x3038, revid=0x80 bus=0, slot=16, func=1 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[20]: type 4, range 32, base 0000bc00, size 5, enabled pcib0: matched entry for 0.16.INTC (src \\_SB_.PCI0.LNKC) pcib0: slot 16 INTC is already routed to irq 10 found-> vendor=0x1106, dev=0x3038, revid=0x80 bus=0, slot=16, func=2 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base e8183000, size 8, enabled pcib0: matched entry for 0.16.INTD (src \\_SB_.PCI0.LNKD) pcib0: slot 16 INTD is already routed to irq 11 found-> vendor=0x1106, dev=0x3104, revid=0x82 bus=0, slot=16, func=3 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 found-> vendor=0x1106, dev=0x3177, revid=0x00 bus=0, slot=17, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0087, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 map[20]: type 4, range 32, base 0000c000, size 4, enabled found-> vendor=0x1106, dev=0x0571, revid=0x06 bus=0, slot=17, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 2 supports D0 D3 current D0 map[10]: type 4, range 32, base 0000c400, size 8, enabled pcib0: matched entry for 0.17.INTC (src \\_SB_.PCI0.LNKC) pcib0: slot 17 INTC is already routed to irq 10 found-> vendor=0x1106, dev=0x3059, revid=0x50 bus=0, slot=17, func=5 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 0000c800, size 8, enabled map[14]: type 1, range 32, base e8184000, size 8, enabled pcib0: matched entry for 0.18.INTA (src \\_SB_.PCI0.LNKA) pcib0: slot 18 INTA is already routed to irq 10 found-> vendor=0x1106, dev=0x3065, revid=0x74 bus=0, slot=18, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x03 (750 ns), maxlat=0x08 (2000 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 agp0: <VIA 8377 (Apollo KT400/KT400A/KT600) host to PCI bridge> mem 0xd0000000-0xd7ffffff at device 0.0 on pci0 agp0: Reserved 0x8000000 bytes for rid 0x10 type 3 at 0xd0000000 agp0: allocating GATT for aperture of size 256M pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0x9000-0x9fff pcib1: memory decode 0xe8000000-0xe80fffff pcib1: prefetched decode 0xd8000000-0xe7ffffff pci1: <PCI bus> on pcib1 pci1: physical bus=1 map[10]: type 3, range 32, base d8000000, size 27, enabled pcib1: device (null) requested decoded memory range 0xd8000000-0xdfffffff map[14]: type 4, range 32, base 00009000, size 8, enabled pcib1: device (null) requested decoded I/O range 0x9000-0x90ff map[18]: type 1, range 32, base e8020000, size 16, enabled pcib1: device (null) requested decoded memory range 0xe8020000-0xe802ffff pcib0: matched entry for 0.1.INTA (src \\_SB_.PCI0.LNKA) pcib0: slot 1 INTA is already routed to irq 10 pcib1: slot 0 INTA is routed to irq 10 found-> vendor=0x1002, dev=0x4144, revid=0x00 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0087, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 3, range 32, base e0000000, size 27, memory disabled pcib1: device (null) requested decoded memory range 0xe0000000-0xe7ffffff map[14]: type 1, range 32, base e8030000, size 16, enabled pcib1: device (null) requested decoded memory range 0xe8030000-0xe803ffff found-> vendor=0x1002, dev=0x4164, revid=0x00 bus=1, slot=0, func=1 class=03-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0080, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D1 D2 D3 current D0 pci1: <display, VGA> at device 0.0 (no driver attached) pci1: <display> at device 0.1 (no driver attached) atapci0: <Promise PDC20571 SATA150 controller> port 0xa400-0xa4ff,0xa000-0xa07f mem 0xe8100000-0xe811ffff,0xe8180000-0xe8180fff irq 11 at device 9.0 on pci0 atapci0: failed: rid 0x20 is memory, requested 4 atapci0: Reserved 0x20000 bytes for rid 0x20 type 3 at 0xe8100000 atapci0: Reserved 0x1000 bytes for rid 0x1c type 3 at 0xe8180000 atapci0: [MPSAFE] ata2: channel #0 on atapci0 ata2: reset tp1 mask=01 ostat0=50 ostat1=50 ata2-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata2: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata2: [MPSAFE] ata3: channel #1 on atapci0 ata3: reset tp1 mask=00 ostat0=ff ostat1=ff ata3: [MPSAFE] ata4: channel #2 on atapci0 ata4: reset tp1 mask=03 ostat0=a0 ostat1=b0 ata4-master: stat=0xa0 err=0xa0 lsb=0xa0 msb=0xa0 ata4-master: stat=0xa0 err=0xa0 lsb=0xa0 msb=0xa0 ata4-master: stat=0xa0 err=0xa0 lsb=0xa0 msb=0xa0 ata4-master: stat=0xa0 err=0xa0 lsb=0xa0 msb=0xa0 ata4-master: stat=0xa0 err=0xa0 lsb=0xa0 msb=0xa0 ata4-master: stat=0xa0 err=0xa0 lsb=0xa0 msb=0xa0 ata4-master: stat=0xa0 err=0xa0 lsb=0xa0 msb=0xa0 ata4-master: stat=0xa0 err=0xa0 lsb=0xa0 msb=0xa0 ata4-slave: stat=0xb0 err=0xb0 lsb=0xb0 msb=0xb0 ata4: reset tp2 stat0=a0 stat1=b0 devices=0x0 ata4: [MPSAFE] em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port 0xa800-0xa83f mem 0xe8140000-0xe815ffff,0xe8120000-0xe813ffff irq 10 at device 10.0 on pci0 em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xe8120000 em0: Reserved 0x40 bytes for rid 0x18 type 4 at 0xa800 em0: [GIANT-LOCKED] em0: bpf attached em0: Ethernet address: 00:0e:0c:6d:38:a9 em0: Speed:N/A Duplex:N/A sym0: <875> port 0xac00-0xacff mem 0xe8182000-0xe8182fff,0xe8181000-0xe81810ff irq 11 at device 11.0 on pci0 sym0: Reserved 0x100 bytes for rid 0x14 type 3 at 0xe8181000 sym0: Reserved 0x1000 bytes for rid 0x18 type 3 at 0xe8182000 sym0: chip clock is 40401KHz sym0: No NVRAM, ID 7, Fast-20, SE, parity checking sym0: open drain IRQ line driver, using on-chip SRAM sym0: using LOAD/STORE-based firmware. sym0: [GIANT-LOCKED] pci0: <multimedia, audio> at device 12.0 (no driver attached) uhci0: <VIA 83C572 USB controller> port 0xb400-0xb41f irq 10 at device 16.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xb400 uhci0: [GIANT-LOCKED] usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <VIA 83C572 USB controller> port 0xb800-0xb81f irq 11 at device 16.1 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xb800 uhci1: [GIANT-LOCKED] usb1: <VIA 83C572 USB controller> on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <VIA 83C572 USB controller> port 0xbc00-0xbc1f irq 10 at device 16.2 on pci0 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbc00 uhci2: [GIANT-LOCKED] usb2: <VIA 83C572 USB controller> on uhci2 usb2: USB revision 1.0 uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered ehci0: <VIA VT6202 USB 2.0 controller> mem 0xe8183000-0xe81830ff irq 11 at device 16.3 on pci0 ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xe8183000 ehci0: [GIANT-LOCKED] ehci_pci_attach: companion usb0 ehci_pci_attach: companion usb1 ehci_pci_attach: companion usb2 usb3: EHCI version 1.0 usb3: companion controllers, 2 ports each: usb0 usb1 usb2 usb3: <VIA VT6202 USB 2.0 controller> on ehci0 usb3: USB revision 2.0 uhub3: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub3: 6 ports with 6 removable, self powered isab0: <PCI-ISA bridge> at device 17.0 on pci0 isa0: <ISA bus> on isab0 atapci1: <VIA 8235 UDMA133 controller> port 0xc000-0xc00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 17.1 on pci0 atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xc000 ata0: channel #0 on atapci1 atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci1: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata0: [MPSAFE] ata1: channel #1 on atapci1 atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci1: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=50 ostat1=50 ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata1-slave: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER> ata1: [MPSAFE] pci0: <multimedia, audio> at device 17.5 (no driver attached) vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xc800-0xc8ff mem 0xe8184000-0xe81840ff irq 10 at device 18.0 on pci0 vr0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xc800 miibus0: <MII bus> on vr0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: OUI 0x004063, model 0x0032, rev. 5 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto vr0: bpf attached vr0: Ethernet address: 00:0a:e6:55:d5:db vr0: [GIANT-LOCKED] fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fdc0: ic_type 90 part_id 80 fdc0: [MPSAFE] fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0: irq maps: 0x1 0x11 0x1 0x1 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio1: irq maps: 0x1 0x9 0x1 0x1 sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A unknown: not probed (disabled) unknown: not probed (disabled) ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0: <ECP parallel printer port> port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/16 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 plip0: bpf attached lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 psmcpnp0: <PS/2 mouse port> irq 12 on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 atkbd0: [GIANT-LOCKED] psm0: current command byte:0047 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model IntelliMouse, device ID 3-00, 3 buttons psm0: config:00000000, flags:00000008, packet size:4 psm0: syncmask:08, syncbits:00 unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff ahc_isa_probe 10: ioport 0xac00 alloc failed ahc_isa_probe 11: ioport 0xbc00 alloc failed ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it fdc: fdc0 already exists; skipping it ppc: ppc0 already exists; skipping it sc: sc0 already exists; skipping it sio: sio0 already exists; skipping it sio: sio1 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <ISA Option ROMs> at iomem 0xe2000-0xe2fff,0xc0000-0xccfff on isa0 pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. procfs registered Timecounter "TSC" frequency 2075027952 Hz quality 800 Timecounters tick every 1.000 msec i4bipr: 4 IP over raw HDLC ISDN device(s) attached (VJ header compression) ipr0: bpf attached ipr1: bpf attached ipr2: bpf attached ipr3: bpf attached i4bctl: ISDN system control port attached i4b: ISDN call control device attached i4brbch: 4 raw B channel access device(s) attached i4btel: 2 ISDN telephony interface device(s) attached i4btrc: 4 ISDN trace device(s) attached lo0: bpf attached cpu0: set speed to 100.0% acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0% ata0-master: pio=0x0c wdma=0x22 udma=0x46 cable=80pin ata0-master: setting PIO4 on VIA 8235 chip ata0-master: setting UDMA133 on VIA 8235 chip ad0: <Maxtor 6Y080L0/YAR41VW0> ATA-7 disk at ata0-master ad0: 78167MB (160086528 sectors), 158816 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA133 ar: FreeBSD check1 failed ata1-slave: pio=0x0c wdma=0x22 udma=0x42 cable=80pin ata1-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin ata1-master: setting PIO4 on VIA 8235 chip ata1-master: setting UDMA33 on VIA 8235 chip ata1-slave: setting PIO4 on VIA 8235 chip ata1-slave: setting UDMA33 on VIA 8235 chip acd0: <NEC DV-5800C/D9S2> DVDROM drive at ata1 as master acd0: read 8268KB/s (8268KB/s), 512KB buffer, UDMA33 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc acd1: <HL-DT-ST DVDRAM GSA-4120B/A102> DVDR drive at ata1 as slave acd1: read 6890KB/s (6890KB/s) write 6890KB/s (6890KB/s), 2048KB buffer, UDMA33 acd1: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd1: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof acd1: Audio: play, 256 volume levels acd1: Mechanism: ejectable tray, unlocked acd1: Medium: no/blank disc ata2-master: pio=0x0c wdma=0x22 udma=0x46 cable=40pin ad4: <ST3160827AS/3.42> ATA-6 disk at ata2-master ad4: 152627MB (312581808 sectors), 310101 C, 16 H, 63 S, 512 B ad4: 16 secs/int, 1 depth queue, SATA150 ar: Promise check1 failed Waiting 15 seconds for SCSI devices to settle (noperiph:sym0:0:-1:-1): SCSI BUS reset delivered. GEOM: new disk ad0 GEOM: new disk ad4 [0] f:00 typ:12 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:33559722 [1] f:80 typ:12 s(CHS):1023/255/63 e(CHS):1023/254/63 s:33559785 l:66974985 [2] f:00 typ:5 s(CHS):1023/255/63 e(CHS):1023/254/63 s:100534770 l:33993540 [3] f:00 typ:165 s(CHS):1023/255/63 e(CHS):1023/254/63 s:134528310 l:25543350 GEOM: Configure ad0s1, start 32256 length 17182577664 end 17182609919 GEOM: Configure ad0s2, start 17182609920 length 34291192320 end 51473802239 GEOM: Configure ad0s3, start 51473802240 length 17404692480 end 68878494719 GEOM: Configure ad0s4, start 68878494720 length 13078195200 end 81956689919 [0] f:00 typ:5 s(CHS):1023/255/63 e(CHS):1023/254/63 s:248573745 l:64002960 [1] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:248573682 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad4s1, start 127269757440 length 32769515520 end 160039272959 GEOM: Configure ad4s2, start 32256 length 127269725184 end 127269757439 MBREXT Slice 5 on ad0s3: [0] f:00 typ:131 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:32001417 [1] f:00 typ:5 s(CHS):1023/254/63 e(CHS):1023/254/63 s:32001480 l:1992060 GEOM: Configure ad0s5, start 32256 length 16384725504 end 16384757759 MBREXT Slice 6 on ad0s3: [0] f:00 typ:130 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:1991997 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad0s6, start 16384790016 length 1019902464 end 17404692479 GEOM: Configure ad0s4a, start 0 length 268435456 end 268435455 GEOM: Configure ad0s4b, start 268435456 length 1073741824 end 1342177279 GEOM: Configure ad0s4c, start 0 length 13078195200 end 13078195199 GEOM: Configure ad0s4e, start 1342177280 length 10737418240 end 12079595519 GEOM: Configure ad0s4f, start 12079595520 length 998599680 end 13078195199 MBREXT Slice 5 on ad4s1: [0] f:00 typ:12 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:64002897 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad4s5, start 32256 length 32769483264 end 32769515519 GEOM: Configure ad4s2a, start 0 length 268435456 end 268435455 GEOM: Configure ad4s2b, start 268435456 length 1073741824 end 1342177279 GEOM: Configure ad4s2c, start 0 length 127269725184 end 127269725183 GEOM: Configure ad4s2d, start 1342177280 length 125927547904 end 127269725183 (probe0:ata0:0:0:0): error 22 (probe0:ata0:0:0:0): Unretryable Error (probe1:ata0:0:1:0): error 22 (probe1:ata0:0:1:0): Unretryable Error (probe4:ata2:0:0:0): error 22 (probe4:ata2:0:0:0): Unretryable Error (probe5:ata2:0:1:0): error 22 (probe5:ata2:0:1:0): Unretryable Error (probe6:ata3:0:0:0): error 22 (probe6:ata3:0:0:0): Unretryable Error (probe7:ata3:0:1:0): error 22 (probe7:ata3:0:1:0): Unretryable Error (probe8:ata4:0:0:0): error 22 (probe8:ata4:0:0:0): Unretryable Error (probe9:ata4:0:1:0): error 22 (probe9:ata4:0:1:0): Unretryable Error (probe0:ata0:0:0:0): error 22 (probe0:ata0:0:0:0): Unretryable Error (probe1:ata0:0:1:0): error 22 (probe1:ata0:0:1:0): Unretryable Error (probe4:ata2:0:0:0): error 22 (probe4:ata2:0:0:0): Unretryable Error (probe5:ata2:0:1:0): error 22 (probe5:ata2:0:1:0): Unretryable Error (probe6:ata3:0:0:0): error 22 (probe6:ata3:0:0:0): Unretryable Error (probe7:ata3:0:1:0): error 22 (probe7:ata3:0:1:0): Unretryable Error (probe8:ata4:0:0:0): error 22 (probe8:ata4:0:0:0): Unretryable Error (probe9:ata4:0:1:0): error 22 (probe9:ata4:0:1:0): Unretryable Error (probe2:ata1:0:0:0): error 22 (probe2:ata1:0:0:0): Unretryable Error (probe3:ata1:0:1:0): error 22 (probe3:ata1:0:1:0): Unretryable Error (probe2:ata1:0:0:0): error 6 (probe2:ata1:0:0:0): Unretryable Error (probe3:ata1:0:1:0): error 6 (probe3:ata1:0:1:0): Unretryable Error (probe2:ata1:0:0:0): error 22 (probe2:ata1:0:0:0): Unretryable Error (probe3:ata1:0:1:0): error 22 (probe3:ata1:0:1:0): Unretryable Error (probe10:sym0:0:0:0): Retrying Command (probe10:sym0:0:0:0): Retrying Command (probe0:sym0:0:0:1): Device Busy (probe0:sym0:0:0:1): Retrying Command pass0 at sym0 bus 0 target 0 lun 0 pass0: <IBM DNES-309170 SA30> Fixed Direct Access SCSI-3 device pass0: Serial Number AJ156082 pass0: 20.000MB/s transfers (20.000MHz, offset 16), Tagged Queueing Enabled pass1 at ata1 bus 0 target 0 lun 0 pass1: <_NEC DV-5800C D9S2> Removable CD-ROM SCSI-0 device pass1: 33.000MB/s transfers pass2 at ata1 bus 0 target 1 lun 0 pass2: <HL-DT-ST DVDRAM GSA-4120B A102> Removable CD-ROM SCSI-0 device pass2: 33.000MB/s transfers GEOM: new disk cd0 GEOM: new disk cd1 GEOM: new disk da0 (cd0:ata1:0:0:0): error 6 (cd0:ata1:0:0:0): Unretryable Error cd0 at ata1 bus 0 target 0 lun 0 cd0: <_NEC DV-5800C D9S2> Removable CD-ROM SCSI-0 device cd0: 33.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present (cd1:ata1:0:1:0): error 6 (cd1:ata1:0:1:0): Unretryable Error cd1 at ata1 bus 0 target 1 lun 0 cd1: <HL-DT-ST DVDRAM GSA-4120B A102> Removable CD-ROM SCSI-0 device cd1: 33.000MB/s transfers cd1: Attempt to query device size failed: NOT READY, Medium not present (cd0:ata1:0:0:0): error 6 (cd0:ata1:0:0:0): Unretryable Error (cd0:ata1:0:0:0): error 6 (cd0:ata1:0:0:0): Unretryable Error (cd0:ata1:0:0:0): error 6 (cd0:ata1:0:0:0): Unretryable Error (cd1:ata1:0:1:0): error 6 (cd1:ata1:0:1:0): Unretryable Error (cd1:ata1:0:1:0): error 6 (cd1:ata1:0:1:0): Unretryable Error (cd1:ata1:0:1:0): error 6 (cd1:ata1:0:1:0): Unretryable Error da0 at sym0 bus 0 target 0 lun 0 da0: <IBM DNES-309170 SA30> Fixed Direct Access SCSI-3 device da0: Serial Number AJ156082 da0: 20.000MB/s transfers (20.000MHz, offset 16), Tagged Queueing Enabled da0: 8748MB (17916240 512 byte sectors: 255H 63S/T 1115C) [0] f:00 typ:5 s(CHS):0/0/33 e(CHS):373/133/16 s:32 l:6000608 [1] f:80 typ:165 s(CHS):373/133/17 e(CHS):1023/54/27 s:6000640 l:11915264 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure da0s1, start 16384 length 3072311296 end 3072327679 GEOM: Configure da0s2, start 3072327680 length 6100615168 end 9172942847 MBREXT Slice 5 on da0s1: [0] f:80 typ:131 s(CHS):0/2/1 e(CHS):1023/63/32 s:32 l:6000576 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure da0s5, start 16384 length 3072294912 end 3072311295 GEOM: Configure da0s2a, start 0 length 268435456 end 268435455 GEOM: Configure da0s2c, start 0 length 6100615168 end 6100615167 GEOM: Configure da0s2e, start 268435456 length 5832179712 end 6100615167 Mounting root from ufs:/dev/ad4s2a start_init: trying /sbin/init tun0: bpf attached pflog0: bpf attached
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20051221221530.GA2390>