Date: Sat, 24 Nov 2001 07:51:49 +0100 From: dak <aurelien.nephtali@wanadoo.fr> To: mobile@freebsd.org, stable@freebsd.org Subject: Xth attempt: Sound problem with VIA on Compaq laptop Message-ID: <20011124075148.A686@mars> In-Reply-To: <200111232217.fANMHMK00142@mars>; from MAILER-DAEMON on Fri, Nov 23, 2001 at 11:17:22PM %2B0100 References: <200111232217.fANMHMK00142@mars>
next in thread | previous in thread | raw e-mail | index | archive | help
--3MwIy2ne0vdjdPXF
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
Hi,
Since a long time I have a problem with my laptop, i don't have sound as long as I reboot under Windows ...
Even on FreeBSD 4.2 the problem occurs.
My dmesg is in attachment. My kernel is built with 'device pcm' but even with every options which exist, the problem is still there :/
And a more strange thing: when i was playing around with sound options by compiling kernel many times, sometimes I can read a music CD with cdcontrol,
sometimes cd is played but no sound ... but when i have sound, on next reboot sound disapears ...
Hope you'll solve that problem soon ...
Thanks in adance.
PS: sorry for my english :>
PS2: My laptop is a Compaq Presario Serie 1200 Model 12XL408
--3MwIy2ne0vdjdPXF
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename=dmesg
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.4-STABLE #3: Thu Nov 15 17:46:12 CET 2001
dak@mars:/usr/src/sys/compile/laptop
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (697.42-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 129957888 (126912K bytes)
avail memory = 123453440 (120560K bytes)
Preloaded elf kernel "kernel" at 0xc030a000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 5 entries at 0xc00fdf70
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI to PCI bridge (vendor=1106 device=8601)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <Trident model 8520 VGA-compatible display device> at 0.0 irq 9
isab0: <VIA 82C686 PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA66 controller> port 0x1420-0x142f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <VIA 83C572 USB controller> at 7.2 irq 11
isab1: <PCI to ISA bridge (vendor=1106 device=3057)> at device 7.4 on pci0
pcm0: <VIA VT82C686A> irq 9 at device 7.5 on pci0
pcm0: cannot allocate bus resource.device_probe_and_attach: pcm0 attach returned 6
pci0: <unknown card> (vendor=0x14f1, dev=0x2013) at 9.0 irq 11
pci_cfgintr_linked: linked (2) to hard-routed irq 9
pci_cfgintr: 0:10 INTA routed to irq 9
pcic0: <TI PCI-1410 PCI-CardBus Bridge> irq 9 at device 10.0 on pci0
pcic0: PCI Memory allocated: 0x44000000
pcic0: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][CSC serial isa irq]
pccard0: <PC Card bus (classic)> on pcic0
orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
IP Filter: v3.4.20 initialized. Default = pass all, Logging = enabled
ad0: 9590MB <FUJITSU MHM2100AT> [19485/16/63] at ata0-master UDMA66
acd0: CDROM <TOSHIBA CD-ROM XM-7002Bc> at ata1-master using PIO4
Mounting root from ufs:/dev/ad0s2a
pccard: card inserted, slot 0
pccard: card removed, slot 0
pccard: card inserted, slot 0
ed1 at port 0x240-0x25f irq 9 flags 0x80010 slot 0 on pccard0
ed1: address 00:e0:98:73:6f:27, type Linksys (16 bit)
lxtphy0: <LXT970 10/100 media interface> on miibus0
lxtphy0: 100baseFX, 100baseFX-FDX, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
--3MwIy2ne0vdjdPXF--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20011124075148.A686>