Date: Sun, 21 Dec 2003 21:27:14 +0100 From: Gordon Bergling <gbergling@0xfce3.net> To: Mathew Kanner <mat@cnd.mcgill.ca> Cc: freebsd-current@freebsd.org Subject: Re: issues between ATAng and pcm Message-ID: <20031221202714.GA924@nemesis.md.0xfce3.net> In-Reply-To: <20031221192604.GH85297@cnd.mcgill.ca> References: <20031221143720.GA3453@nemesis.md.0xfce3.net> <20031221192604.GH85297@cnd.mcgill.ca>
next in thread | previous in thread | raw e-mail | index | archive | help
--PEIAKu/WMn1b1Hv9 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable Hi Mathew, On Sun Dec 21, 2003 at 02:26PM -0500, Mathew Kanner wrote: > On Dec 21, Gordon Bergling wrote: > > I discovering a strange behavior which seems to be caused of issues > > between ATAng and pcm looking. I start burning a cdr with an atapi > > cdrw drive at low speed (4x) and the sound which is played by xmms is > > getting slower and slower. After a few seconds the system isn't respond= ing > > anymore. One tone is played all the time and the system seems to be hard > > locked up. After nearly 60 seconds the system resumes normal operations. > > I had tried 3 times and the result is allways the same. > >=20 > > My hardware is: > > ad0: 43979MB <IBM-DTLA-307045> [89355/16/63] at ata0-master UDMA100 > > acd0: CDROM <CD-540E> at ata1-master PIO4 > > acd1: CDRW <R/RW 8x4x32> at ata1-slave PIO4 > > cd0 at ata1 bus 0 target 0 lun 0 > > cd0: <TEAC CD-540E 1.0A> Removable CD-ROM SCSI-0 device=20 > > cd0: 16.000MB/s transfers > > cd0: Attempt to query device size failed: NOT READY, Medium not present > > cd1 at ata1 bus 0 target 1 lun 0 > > cd1: <IDE-CD R/RW 8x4x32 2,0> Removable CD-ROM SCSI-0 device=20 > > cd1: 16.000MB/s transfers > > cd1: Attempt to query device size failed: NOT READY, Medium not present > > da0 at ahc0 bus 0 target 6 lun 0 > > da0: <IBM DDRS-34560D DC1B> Fixed Direct Access SCSI-2 device=20 > > da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing > > Enabled > > da0: 4357MB (8925000 512 byte sectors: 255H 63S/T 555C) >=20 > echo "hw.ata.atapi_dma=3D1" >> /boot/loader.conf I try to burn a cd which hw.ata.atapi_dma=3D1 but the same error is coming up. burncd died with hundreds of "burncd: ioctl(CDRIOCSETBLOCKSIZE): Device not configured". The following messages were printed to the console: ata1: resetting devices .. acd0: WARNING - removed from configuration acd1: WARNING - removed from configuration done ata1-slave: timeout sending command=3Da0 ata1-slave: error issuing ATA PACKET command psmintr: delay too long; resetting byte count (cd0:ata1:0:0:0): lost device (cd0:ata1:0:0:0): removing device entry GEOM: destroy disk cd0 dp=3D0xc2e33e00 any hints? best regards, Gordon --=20 Gordon Bergling <GBergling@0xfce3.net> http://www.0xFCE3.net/ PGP Fingerprint: 7732 9BB1 5013 AE8B E42C 28E0 93B9 D32B C76F 02A0 RIPE-HDL: MDTP-RIPE "There is no place like 127.0.0.0/8" --PEIAKu/WMn1b1Hv9 Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.3 (FreeBSD) iD8DBQE/5gIhk7nTK8dvAqARAmUEAKCv7F7z8Xqd0DSS9rBNjD+2bdCaWgCbBwVz 6vQ519oaswU4mZzlbmAIdZY= =w407 -----END PGP SIGNATURE----- --PEIAKu/WMn1b1Hv9--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20031221202714.GA924>