Date: Mon, 15 Jul 2013 11:10:58 -0700 From: hiren panchasara <hiren.panchasara@gmail.com> To: Adrian Chadd <adrian@freebsd.org> Cc: freebsd-embedded@freebsd.org Subject: Re: Making Picostation m2HP work Message-ID: <CALCpEUE%2BDMq9KYBNZfJLx6DTxAY%2B1gv3uLQ3OtO-N1W1zRKL=Q@mail.gmail.com> In-Reply-To: <CALCpEUGmtpVL=Y5Uqiz_h4%2BKgBDH9%2B=vC_DJHyU5rvOGOdiSag@mail.gmail.com> References: <CALCpEUHxqyZb1Y5WqsuxjvwY2Pd_xN2%2BoTgsew0DwdRMC6=5Nw@mail.gmail.com> <CAJ-VmomtCNq3KUjVfcaLGjnSLjnvBWKzARs8TzebmN9MdMFkcA@mail.gmail.com> <CALCpEUGmtpVL=Y5Uqiz_h4%2BKgBDH9%2B=vC_DJHyU5rvOGOdiSag@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sun, Jul 14, 2013 at 12:13 PM, hiren panchasara <hiren.panchasara@gmail.com> wrote: > On Fri, Jul 12, 2013 at 1:58 PM, Adrian Chadd <adrian@freebsd.org> wrote: >> cool. >> >> So step #1 - what kind of SoC is it (7241) and wifi (ar9280) ? >> >> The SoC dictates which base config we "copy" when we build the kernel. >> >> The important bits for these SoCs are: >> >> * which SoC >> * for AR91xx/AR71xx - which ethernet switch and how it's wired up; the >> AR933x and AR724x have an internet switch so there's only one config >> * how much RAM >> * what's the flash layout - important for generating the image and >> populating the hints table with the flash layout >> >> But let's focus on getting a kernel netbooting first.. > > Build kernel.AP91 with your buildscripts and trying to tftpboot the > board with that but getting following errors in /var/log/messages on > my tftpserver (my laptop) > > flymockour-l7 in.tftpd[11247]: tftpd: oack: Host is down - when I do > "tftpboot 0x80050000 kernel.AP91" and tftp transfer never gets done > (keeps timing out) > > I am not sure what this means but I will try putting switch in-between > my laptop and the board and see if I can make this thing to work. Adrian, Putting a switch between tftpserver and the board worked. (Thanks Rui). ar7240> printenv bootdelay=1 baudrate=115200 ethaddr=00:15:6d:0d:00:00 mtdids=nor0=ar7240-nor0 partition=nor0,0 mtddevnum=0 mtddevname=u-boot filesize=10000 fileaddr=81000000 serverip=192.168.1.254 ethact=eth0 mtdparts=mtdparts=ar7240-nor0:256k(u-boot),64k(u-boot-env),1024k(kernel),5760k(rootfs),256k(cfg),64k(EEPROM) bootcmd=bootm 0x9f050000 bootargs=console=tty0 root=31:03 rootfstype=squashfs init=/init ipaddr=192.168.1.20 stdin=serial stdout=serial stderr=serial Environment size: 452/65532 bytes ar7240> tftpboot 0x80050000 kernel.AP91 Using eth0 device TFTP from server 192.168.1.254; our IP address is 192.168.1.20 Filename 'kernel.AP91'. Load address: 0x80050000 Loading: # done ar7240> go 0x80050100 ## Starting application at 0x80050100 ... Its stuck here and not doing anything. What should I look into next? Thanks, Hiren > > Anybody with some clue what this means? > > Thanks, > Hiren >> >> >> >> -adrian >>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CALCpEUE%2BDMq9KYBNZfJLx6DTxAY%2B1gv3uLQ3OtO-N1W1zRKL=Q>