Date: Sat, 29 Apr 2006 08:15:20 +0000 (UTC) From: "Bjoern A. Zeeb" <bz@FreeBSD.org> To: Maxim Sobolev <sobomax@FreeBSD.org> Cc: cvs-src@FreeBSD.org, src-committers@FreeBSD.org, cvs-all@FreeBSD.org Subject: Re: cvs commit: src/sys/dev/sk if_sk.c if_skreg.h Message-ID: <20060429081427.J13011@maildrop.int.zabbadoz.net> In-Reply-To: <44524F85.5000508@FreeBSD.org> References: <200604280317.k3S3Hb3L017882@repoman.freebsd.org> <1146195791.40894.6.camel@shumai.marcuscom.com> <44524F85.5000508@FreeBSD.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, 28 Apr 2006, Maxim Sobolev wrote: > Joe Marcus Clarke wrote: >> On Fri, 2006-04-28 at 03:17 +0000, Maxim Sobolev wrote: >>> sobomax 2006-04-28 03:17:37 UTC >>> >>> FreeBSD src repository >>> >>> Modified files: >>> sys/dev/sk if_sk.c if_skreg.h Log: >>> Add some incomplete support for Marvell Yukon EC controllers based on >>> OpenBSD changes. With these changes, PHY part of the driver becomes >>> functional (it senses media changes and negotiates speed just fine), >>> previously it just hang with no PHY message, but no data goes through >>> interface (error message is "can not stop transfer of Tx/Rx descriptor). >>> Hopefully somebody with more clue/free time will be able to pick up >>> after me. >> >> Maxim, I patched if_sk in a similar fashion, and got the same errors you >> did. I took a look at the Linux sky2 driver which works with the >> MacBook Yukon-II, and the Yukon-II chipset is very different from the >> Yukon. >> >> However, I did find that the SysKonnect-provided Yukon-II driver works >> quite well (see >> http://lists.freebsd.org/pipermail/freebsd-net/2006-January/009543.html). >> Building the driver was easy. I just untarred the source to >> /usr/src/sys/dev/myk, and did a make all. With this driver, I was able to >> get the wired ethernet in the MacBook to pass traffic. > > Thanks for the pointer, I will try that. It is not a big issue for me, > though, since ath works perfectly just OOB. So are you going to back out your last change to sk(4)? -- Bjoern A. Zeeb bzeeb at Zabbadoz dot NeT
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20060429081427.J13011>