Date: Thu, 11 Sep 2003 17:30:59 -0400 From: "John Straiton" <jsmailing@clickcom.com> To: "'Scott Lambert'" <lambert@lambertfam.org> Cc: freebsd-performance@freebsd.org Subject: RE: Performance Problems.. Server hardware smoked by $500 box? Message-ID: <004701c378ac$04783280$1916c60a@win2k.clickcom.com> In-Reply-To: <20030911205454.GA85724@laptop.lambertfam.org>
next in thread | previous in thread | raw e-mail | index | archive | help
> > #bonnie -s 1 (run on NFS share) > > -------Sequential Output-------- ---Sequential > Input--- --Random-- > > -Per Char- --Block--- -Rewrite-- -Per Char- --Block--- > > --Seeks--- Machine MB K/sec %CPU K/sec %CPU K/sec %CPU > K/sec %CPU K/sec %CPU K/sec %CPU > > PROD 1 6364 25.0 9121 4.9 166 0.3 2906 13.5 > 94108 28.6 398.8 3.3 > > DEV 1 11246 65.3 11259 6.4 6733 4.3 11009 41.9 > 292571 95.3 5612.2 28.9 > > Did you build these tables in a variable font or something? > I had to do a lot of massaging to get them to line up and be > readable in mutt and vi. Damn outlook.... =( Cut n pasted from SecureCRT. > Using less CPU% on the PROD box without memory pressure says > I/O issues to me. > > Is your SCSI bus clean? Do you get any SCSI errors? > Is write cache enabled on the SCSI? > How big is the hardware cache on the SCSI? and the IDE? > ...etc.. Both bonnie scores are to the same place... To the DB/File Server's RAID5 chassis via NFS. Since nothing is being served (even php session files are written over NFS), the local drive performance shouldn't be an issue in my mind, tho' I included it for completeness. Please correct me if I'm wrong. > Have you tried putting the DEV NIC in the PROD machine? Can't. The production machine is a Dell 1650, a 1 Unit machine with zero PCI slots (at least ones that a 3c905 will fit in). We were gonna try that yesterday *frown*. > Have you watched systat -vm 1 while testing? Maybe you can > tell if you are getting an interupt storm or something. Will try.. > Do you have a lot of apache processes in biord during the run > on the PROD box? Yes, in all cases the # of Min/Max/Start servers on the production machine has been approximately double over the development. But everything I've read seemed to indicate that this *helps* serving speed until you run into vm issues. Am I misinformed? > Are the filesystems mounted with the same options on > production and development systems? > > > Recv Send Send > > Socket Socket Message Elapsed > > Size Size Size Time Throughput > > bytes bytes bytes secs. 10^6bits/sec > > 57344 32768 32768 10.01 92.74 # DB FROM PROD > > 57344 32768 32768 10.00 87.61 # DB FROM DEV > > Either machine should be able to saturate a 100Mbps link if > the data doesn't have to come from disk first. My thoughts too. This test was run using netperf which to the best of my knowledge, just runs 1's and 0's down the link (client/server) to test speed, it doesn't actually try sending a file or anything. John Straiton jks@ clickcom.com Clickcom, Inc 704-365-9970x101
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?004701c378ac$04783280$1916c60a>