Date: Wed, 28 Jan 2009 11:19:24 +0300 (MSK) From: "Marat N.Afanasyev" <marat@zealot.ksu.ru> To: FreeBSD-gnats-submit@FreeBSD.org Subject: usb/131074: no run-time detection of usb devices plugged into external usb hub Message-ID: <200901280819.n0S8JOcu085364@zealot.ksu.ru> Resent-Message-ID: <200901280830.n0S8U2Zt054661@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 131074
>Category: usb
>Synopsis: no run-time detection of usb devices plugged into external usb hub
>Confidential: no
>Severity: non-critical
>Priority: low
>Responsible: freebsd-usb
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Wed Jan 28 08:30:01 UTC 2009
>Closed-Date:
>Last-Modified:
>Originator: Marat N.Afanasyev
>Release: FreeBSD 7.1-STABLE amd64
>Organization:
>Environment:
System: FreeBSD zealot.ksu.ru 7.1-STABLE FreeBSD 7.1-STABLE #1: Tue Jan 20 05:47:24 MSK 2009 root@zealot.ksu.ru:/usr/obj/usr/src/sys/ZEALOT amd64
dmesg.boot:
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.1-STABLE #1: Tue Jan 20 05:47:24 MSK 2009
root@zealot.ksu.ru:/usr/obj/usr/src/sys/ZEALOT
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) Dual Core Processor 4850e (2500.19-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x60fb2 Stepping = 2
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x2001<SSE3,CX16>
AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
AMD Features2=0x11f<LAHF,CMP,SVM,ExtAPIC,CR8,Prefetch>
Cores per package: 2
usable memory = 4285681664 (4087 MB)
avail memory = 4124286976 (3933 MB)
ACPI APIC Table: <122408 APIC1032>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0 <Version 2.1> irqs 0-23 on motherboard
netsmb_dev: loaded
acpi0: <122408 RSDT1032> on motherboard
ACPI: Overriding _OS definition with "Linux"
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of ffb80000, 80000 (3) failed
acpi0: reservation of fff00000, 100000 (3) failed
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, cff00000 (3) failed
ACPI HPET table warning: Sequence is non-zero (2)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xc000-0xc0ff mem 0xd0000000-0xdfffffff,0xfeaf0000-0xfeafffff irq 18 at device 0.0 on pci1
drm0: <ATI Radeon X1600> on vgapci0
vgapci0: child drm0 requested pci_enable_busmaster
info: [drm] Initialized radeon 1.29.0 20080613
vgapci1: <VGA-compatible display> mem 0xfeae0000-0xfeaeffff at device 0.1 on pci1
pcib2: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci2: <ACPI PCI bus> on pcib2
re0: <RealTek 8168/8168B/8168C/8168CP/8168D/8111B/8111C/8111CP PCIe Gigabit Ethernet> port 0xd800-0xd8ff mem 0xfebff000-0xfebfffff irq 18 at device 0.0 on pci2
re0: Using 2 MSI messages
re0: Chip rev. 0x38000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
re0: Ethernet address: 00:1d:92:da:0c:b0
re0: [FILTER]
re0: [FILTER]
atapci0: <ATI IXP600 SATA300 controller> port 0xb000-0xb007,0xa000-0xa003,0x9000-0x9007,0x8000-0x8003,0x7000-0x700f mem 0xfe9ff800-0xfe9ffbff irq 22 at device 18.0 on pci0
atapci0: [ITHREAD]
atapci0: AHCI Version 01.10 controller with 4 ports detected
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci0
ata4: [ITHREAD]
ata5: <ATA channel 3> on atapci0
ata5: [ITHREAD]
ohci0: <OHCI (generic) USB controller> mem 0xfe9fe000-0xfe9fefff irq 16 at device 19.0 on pci0
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xfe9fd000-0xfe9fdfff irq 17 at device 19.1 on pci0
ohci1: [GIANT-LOCKED]
ohci1: [ITHREAD]
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
ohci2: <OHCI (generic) USB controller> mem 0xfe9fc000-0xfe9fcfff irq 18 at device 19.2 on pci0
ohci2: [GIANT-LOCKED]
ohci2: [ITHREAD]
usb2: OHCI version 1.0, legacy support
usb2: SMM does not respond, resetting
usb2: <OHCI (generic) USB controller> on ohci2
usb2: USB revision 1.0
uhub2: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
ohci3: <OHCI (generic) USB controller> mem 0xfe9fb000-0xfe9fbfff irq 17 at device 19.3 on pci0
ohci3: [GIANT-LOCKED]
ohci3: [ITHREAD]
usb3: OHCI version 1.0, legacy support
usb3: SMM does not respond, resetting
usb3: <OHCI (generic) USB controller> on ohci3
usb3: USB revision 1.0
uhub3: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ohci4: <OHCI (generic) USB controller> mem 0xfe9fa000-0xfe9fafff irq 18 at device 19.4 on pci0
ohci4: [GIANT-LOCKED]
ohci4: [ITHREAD]
usb4: OHCI version 1.0, legacy support
usb4: SMM does not respond, resetting
usb4: <OHCI (generic) USB controller> on ohci4
usb4: USB revision 1.0
uhub4: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe9ff000-0xfe9ff0ff irq 19 at device 19.5 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb5: EHCI version 1.0
usb5: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4
usb5: <EHCI (generic) USB 2.0 controller> on ehci0
usb5: USB revision 2.0
uhub5: <ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb5
uhub5: 10 ports with 10 removable, self powered
uhub6: <vendor 0x03f0 product 0x2f24, class 9/0, rev 2.00/0.00, addr 2> on uhub5
uhub6: multiple transaction translators
uhub6: 6 ports with 6 removable, self powered
ucom0: <ArkMicroChips USB-UART Controller, class 0/0, rev 1.10/0.01, addr 3> on uhub6
uhub7: <vendor 0x0409 product 0x0059, class 9/0, rev 2.00/1.00, addr 4> on uhub5
uhub7: single transaction translator
uhub7: 4 ports with 4 removable, self powered
umass0: <Generic Mass Storage Device, class 0/0, rev 2.00/1.26, addr 5> on uhub7
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci1: <ATI IXP600 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on pci0
ata0: <ATA channel 0> on atapci1
ata0: [ITHREAD]
pci0: <multimedia, HDA> at device 20.2 (no driver attached)
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib3: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci3: <ACPI PCI bus> on pcib3
pci3: <multimedia, audio> at device 3.0 (no driver attached)
pci3: <input device> at device 3.1 (no driver attached)
k8temp0: <AMD K8 Thermal Sensors> on hostb4
acpi_button0: <Power Button> on acpi0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio0: [FILTER]
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse Explorer, device ID 4
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_throttle0: CLK_VAL field overlaps THT_EN bit
device_attach: acpi_throttle0 attach returned 6
powernow0: <PowerNow! K8> on cpu0
cpu1: <ACPI CPU> on acpi0
powernow1: <PowerNow! K8> on cpu1
orm0: <ISA Option ROM> at iomem 0xc0000-0xcf7ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
uscanner0: <Canon CanoScan, class 255/0, rev 1.10/1.00, addr 2> on uhub2
ulpt0: <HewLett Packard HP LaserJet 1200, class 0/0, rev 1.10/1.00, addr 3> on uhub2
ulpt0: using bi-directional mode
Timecounters tick every 1.000 msec
ipfw2 initialized, divert enabled, nat loadable, rule-based forwarding enabled, default to accept, logging limited to 1000 packets/entry by default
acd0: DVDR <PIONEER DVD-RW DVR-111D/1.29> at ata0-master UDMA66
ad4: 238475MB <WDC WD2500JS-40MVB1 10.02E01> at ata2-master SATA300
ad6: 476940MB <Seagate ST3500320AS SD15> at ata3-master SATA300
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x48 0x00 0x01
SMP: AP CPU #1 Launched!
cd0 at ata0 bus 0 target 0 lun 0
cd0: <PIONEER DVD-RW DVR-111D 1.29> Removable CD-ROM SCSI-0 device
cd0: 66.000MB/s transfers
cd0: cd present [2288832 x 2048 byte records]
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Generic USB SD Reader 1.00> Removable Direct Access SCSI-0 device
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da1 at umass-sim0 bus 0 target 0 lun 1
da1: <Generic USB CF Reader 1.01> Removable Direct Access SCSI-0 device
da1: 40.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
da2 at umass-sim0 bus 0 target 0 lun 2
da2: <Generic USB SM Reader 1.02> Removable Direct Access SCSI-0 device
da2: 40.000MB/s transfers
da2: Attempt to query device size failed: NOT READY, Medium not present
da3 at umass-sim0 bus 0 target 0 lun 3
da3: <Generic USB MS Reader 1.03> Removable Direct Access SCSI-0 device
da3: 40.000MB/s transfers
da3: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/ad4s1a
re0: link state changed to UP
vlan1: link state changed to UP
vlan3: link state changed to UP
vlan4: link state changed to UP
vlan11: link state changed to UP
uscanner0 and ulpt0 plugged into root hub on motherboard, da0-da3 are
fixed slots on usb card-reader with 3 self-powered usb 2.0 ports (uhub7)
and ucom0 is plugged into uhub6 (6 self-powered usb 2.0 ports) on my
monitor. No device plugged into uhub6 or uhub7 is detected in run-time,
such devices can be detected only in boot-time.
>Description:
usb devices plugged into external usb hub are detected only in boot-time,
no detection of such devices in run-time.
>How-To-Repeat:
boot system with external usb hub, try to plug in any usb device in this hub,
see no reaction from system
>Fix:
>Release-Note:
>Audit-Trail:
>Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200901280819.n0S8JOcu085364>