Date: Thu, 7 Mar 2002 20:22:19 -0800 (PST) From: Shizuka Kudo <shizukakudo_99@yahoo.com> To: sos@freebsd.dk, stable@freebsd.org Subject: Re: Request for testers of new ATA driver patches Message-ID: <20020308042219.52105.qmail@web11403.mail.yahoo.com> In-Reply-To: <200203042201.g24M1nU36308@freebsd.dk>
next in thread | previous in thread | raw e-mail | index | archive | help
--0-979827352-1015561339=:52065 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Soren, I apply the latest patches posted (2002-0307), build the kernel, reboot and everything seems OK, the RAID 0 drive is recognized correctly as ar0. However, when I reboot, the BIOS cannot detect the RAID card anymore except a power recycle. I attached the boot -v dmesg for your reference. My machine is a HP Vectra VL Pentium 200 with an IWill SIDE 100 raid card (a HighPoint 370A). Regards, --- Søren Schmidt <sos@freebsd.dk> wrote: > > I'm currently backporting the -current ATA driver to > -stable, and > I need some testers as to cover as much HW as > possible. > The patches are new, but at least they dont panic > here :) > They include atacontrol (for hotswapping, RAID > control etc) and > burncd with all -current features. > > ftp://ftp.freebsd.dk/pub/ATA/ata-diff-stable-2002-0304.gz > > Get those and tell me how it works for you, thanks!! > > PS: It might be nessesary to create the dir > sbin/atacontrol before > applying these patches... > > PPS: I dont subscribe to the -stable list, so please > mail me directly > with any questions/info you may have... > > -Søren > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-stable" in the body of the message __________________________________________________ Do You Yahoo!? Try FREE Yahoo! Mail - the world's greatest free email! http://mail.yahoo.com/ --0-979827352-1015561339=:52065 Content-Type: text/plain; name="dmesg.txt" Content-Description: dmesg.txt Content-Disposition: inline; filename="dmesg.txt" Extended BIOS: disabled Lower BIOS: enabled Coprocessor IRQ13: enabled Mouse IRQ12: disabled Interrupt Routing: A: IRQ9, B: IRQ11, C: disabled, D: disabled MB0: IRQ15, MB1: isa0: <ISA bus> on isab0 atapci1: <Intel PIIX3 ATA controller> port 0xf8b0-0xf8bf at device 15.1 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xf8b0 ata0: at 0x1f0 irq 14 on atapci1 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xf8b8 ata1: mask=02 ostat0=ff ostat2=50 ata1-slave: ATAPI 14 eb ata1: mask=02 stat0=00 stat1=00 ata1: devices=08 ata1: at 0x170 irq 15 on atapci1 ata-: ata0 exists, using next available unit number ata-: ata1 exists, using next available unit number Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ata4 failed to probe at port 0x1f0 irq 14 on isa0 ata5 failed to probe at port 0x170 irq 15 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 psm0: current command byte:0047 psm0: failed to reset the aux device. vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 05 a0 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio0: irq maps: 0x41 0x51 0x41 0x41 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: irq maps: 0x41 0x49 0x41 0x41 sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: parallel port found at 0x378 ppc0: using extended I/O port range ppc0: EPP SPP ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode ppbus0: IEEE1284 device found /NIBBLE/PS2/ECP/ECP_RLE/NIBBLE_ID/PS2_ID/ECP_ID/ECP_RLE_ID/Extensibility Link Probing for PnP devices on ppbus0: ppbus0: <XEROX 4508> PRINTER PCL5E plip0: <PLIP network interface> on ppbus0 bpf: lp0 attached lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 isa_probe_children: probing PnP devices BIOS Geometries: 0:026c7f3f 0..620=621 cylinders, 0..127=128 heads, 1..63=63 sectors 1:03fd7f3f 0..1021=1022 cylinders, 0..127=128 heads, 1..63=63 sectors 0 accounted for Device configuration finished. bpf: lo0 attached bpf: ppp0 attached new masks: bio 68c240, tty 63009a, net 67089a bpf: sl0 attached ad4: success setting WDMA2 on HighPoint chip Creating DISK ad4 ar: HighPoint check1 failed ad4: <QUANTUM FIREBALL_TM2550A/A6B.2000> ATA-0 disk at ata2-master ad4: 2445MB (5008752 sectors), 4969 C, 16 H, 63 S, 512 B ad4: 1 secs/int, 1 depth queue, WDMA2 ad4: piomode=4 dmamode=2 udmamode=-1 cblid=0 ad5: success setting WDMA2 on HighPoint chip Creating DISK ad5 ad6: success setting PIO4 on HighPoint chip Creating DISK ad6 Creating DISK ar0 ar0: 4028MB <ATA RAID0 array> [513/255/63] status: READY subdisks: 0 READY ad5: <Maxtor 82100A4/CA8X0D06> ATA-3 disk at ata2-slave ad5: 2014MB (4124736 sectors), 4092 C, 16 H, 63 S, 512 B ad5: 16 secs/int, 1 depth queue, WDMA2 ad5: piomode=4 dmamode=2 udmamode=-1 cblid=0 1 READY ad6: <IBM-DAQA-32160/R4ORA51B> ATA-3 disk at ata3-master ad6: 2067MB (4233600 sectors), 4200 C, 16 H, 63 S, 512 B ad6: 16 secs/int, 1 depth queue, PIO4 ad6: piomode=4 dmamode=1 udmamode=-1 cblid=0 ata1-slave: piomode=3 dmamode=1 udmamode=-1 dmaflag=1 ata1-slave: success setting PIO3 on generic chip acd0: <MATSHITA CR-583/BE34> CDROM drive at ata1 as slave acd0: read 1378KB/s (33004KB/s), 128KB buffer, PIO3 acd0: Reads: CD-R, CD-DA acd0: Writes: acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc Mounting root from ufs:/dev/da0s1a no such device 'da' setrootbyname failed ffs_mountroot: can't find rootvp Root mount failed: 6 Manual root filesystem specification: <fstype>:<device> Mount <device> using filesystem <fstype> eg. ufs:/dev/da0s1a ? List valid disk boot devices <empty line> Abort manual input mountroot> ufs:/dev/ad0\^H \^H4s1/\^H \^Ha Mounting root from ufs:/dev/ad4s1a ad4s1: type 0xa5, start 63, end = 3685247, size 3685185 : OK ad4s2: type 0xa5, start 3685248, end = 5007743, size 1322496 : OK start_init: trying /sbin/init ATA-3 disk at ata2-slave ATA-3 disk at ata2-slave ar0s1: type 0xa5, start 63, end = 8241344, size 8241282 : OK --0-979827352-1015561339=:52065-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020308042219.52105.qmail>