Date: Fri, 29 Mar 1996 09:43:37 -0500 (EST) From: "Marc G. Fournier" <scrappy@ki.net> To: stable@freebsd.org Subject: Stable as bad with Adaptec as NCR Message-ID: <Pine.BSF.3.91.960329093949.568B-100000@ki.net>
next in thread | raw e-mail | index | archive | help
Hi...
Anyone care to make suggestions on maybe options I should turn on
in the kernel? This morning, less then 24hrs since last reboot, the system
froze with a SCSI bus hang...again :( (hard drive LED on bright red)
After the last hang, I pulled out the ASUS SC-100 I had in the machine
and put the Adaptec 1542CF in.
Included is what my system currently has in her for hardware,
noting that the video card is an ATI Mach64 w/ 4Meg VRAM (shouldn't
affect things, should it?) and that there are 2xConner drives and 2xQuantum
in the machine.
Right about now, I'll try just about anything :)
Thanks...
FreeBSD 2.1-STABLE #5: Tue Mar 26 14:40:09 EST 1996
scrappy@ki.net:/usr/src/sys/compile/kinet
CPU: i486 DX4 (486-class CPU)
Origin = "GenuineIntel" Id = 0x480 Stepping=0
Features=0x3<FPU,VME>
real memory = 16777216 (16384K bytes)
avail memory = 14692352 (14348K bytes)
Probing for devices on PCI bus 0:
chip0 <SiS 85c496> rev 49 on pci0:5
vga0 <VGA-compatible display device> rev 0 on pci0:15
Probing for devices on the ISA bus:
ed0 at 0x280-0x29f irq 5 maddr 0xd8000 msize 16384 on isa
ed0: address 00:00:c0:86:44:79, type WD8013EPC (16 bit)
vt0 at 0x60-0x6f irq 1 on motherboard
vt0: generic, 80 col, color, 8 scr, mf2-kbd, [R3.20-b24]
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: NEC 72065B
fd0: 1.44MB 3.5in
aha0 at 0x330-0x333 irq 11 drq 5 on isa
aha0 waiting for scsi devices to settle
(aha0:0:0): "CONNER CFP1060S 1.05GB 243F" type 0 fixed SCSI 2
sd0(aha0:0:0): Direct-Access 1013MB (2074880 512 byte sectors)
(aha0:1:0): "QUANTUM LPS340S 020B" type 0 fixed SCSI 2
sd1(aha0:1:0): Direct-Access 327MB (670506 512 byte sectors)
(aha0:2:0): "QUANTUM LP240S GM240S01X 4.6" type 0 fixed SCSI 2
sd2(aha0:2:0): Direct-Access 234MB (479350 512 byte sectors)
(aha0:3:0): "CONNER CFA540S 13B0" type 0 fixed SCSI 2
sd3(aha0:3:0): Direct-Access 515MB (1056708 512 byte sectors)
ep0 not found at 0x300
npx0 on motherboard
npx0: INT 16 interface
WARNING: / was not properly dismounted.
Marc G. Fournier | POP Mail Telnet Acct DNS Hosting
System | WWW Services Database Services | Knowledge,
Administrator | | Information and
scrappy@ki.net | WWW: http://www.ki.net | Communications, Inc
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.3.91.960329093949.568B-100000>