Date: Thu, 3 Aug 2000 15:49:02 +0200 From: Jascha Hoogenraad <jascha@equilibrate.net> To: freebsd-stable@FreeBSD.org Subject: Adaptec 2940u2w + 4.1-stable from 2-8 Message-ID: <20000803154902.A470@equilibrate.net>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --]
Dear FreeBSD world,
i have the following problem and i hope you know an answer for it:
I run 4.1-stable (from 2-8 from ftp.nl.freebsd.org)
i get this error:
www.p0.s0: fatal write I/O error
scsi0: fatal drive I/O error
vinum: drive scsi0 is down
vinum: mail.p0.s0 is crashed
vinum: mail.p0 is faulty
vinum: mail is down
(da0:ahc0:0:0:0): Synchronize cache failed, status == 0x5b, scsi status == 0x0
(da0:ahc0:0:0:0): Invalidating pack
www.p0.s0: fatal write I/O error
scsi0: fatal drive I/O error
(da0:ahc0:0:0:0): Invalidating pack
www.p0.s0: fatal write I/O error
scsi0: fatal drive I/O error
(da0:ahc0:0:0:0): Invalidating pack
www.p0.s0: fatal write I/O error
scsi0: fatal drive I/O error
(da0:ahc0:0:0:0): Invalidating pack
www.p0.s0: fatal write I/O error
scsi0: fatal drive I/O error
(da0:ahc0:0:0:0): Invalidating pack
www.p0.s0: fatal write I/O error
scsi0: fatal drive I/O error
(da0:ahc0:0:0:0): Invalidating pack
www.p0.s0: fatal write I/O error
scsi0: fatal drive I/O error
(da0:ahc0:0:0:0): Invalidating pack
www.p0.s0: fatal write I/O error
scsi0: fatal drive I/O error
(da0:ahc0:0:0:0): Invalidating pack
If anyone knows where this comes from and/or how to fix this i would be gratefull.. I'm a very faithfull FreeBSD user and have never had real big troubles with FreeBSD till 4.x, maybe it's just an hardware error, but the scsi bios tests en checkit tests run without much problems..
my dmesg is:
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.1-STABLE #0: Thu Aug 3 12:55:07 GMT 2000
root@www2.equilibrate.net:/www/usr/obj/usr/src/sys/WWW2
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (602.19-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x683 Stepping = 3
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PA
T,PSE36,MMX,FXSR,XMM>
real memory = 536854528 (524272K bytes)
config> q
avail memory = 519086080 (506920K bytes)
Preloaded elf kernel "kernel" at 0xc031c000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc031c09c.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib2: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib2
pci1: <ATI Mach64-GB graphics accelerator> at 0.0 irq 11
isab0: <VIA 82C596B PCI-ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C596B ATA66 controller> port 0xb800-0xb80f at device 4.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <VIA 83C572 USB controller> at 4.2 irq 12
ahc0: <Adaptec 2940 Ultra2 SCSI adapter> port 0xb000-0xb0ff mem 0xe1000000-0xe10
00fff irq 10 at device 11.0 on pci0
ahc0: aic7890/91 Wide Channel A, SCSI Id=7, 16/255 SCBs
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xa800-0xa87f mem 0xe0800000-0xe080
007f irq 12 at device 13.0 on pci0
xl0: Ethernet address: 00:50:da:df:3c:05
miibus0: <MII bus> on xl0
xlphy0: <3Com internal media interface> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib1: <Host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib1
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ad0: 12407MB <Maxtor 91301U3> [25209/16/63] at ata0-master using UDMA66
acd0: CDROM <CD-ROM 48X/TKU> at ata1-master using PIO4
Waiting 15 seconds for SCSI devices to settle
Mounting root from ufs:/dev/ad0s1a
da0 at ahc0 bus 0 target 0 lun 0
da0: <SEAGATE ST318436LW 0005> Fixed Direct Access SCSI-3 device
da0: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled
da0: 17522MB (35885168 512 byte sectors: 255H 63S/T 2233C)
vinum: loaded
vinum: reading configuration from /dev/da0s1e
Kind Regards,
Jascha Hoogenraad
--
Jascha Hoogenraad <mailto:jascha@equilibrate.net>
Equilibrate Networking - Voice: +31-70-3364900 - Fax: +31-70-3364901
[-- Attachment #2 --]
-----BEGIN PGP SIGNATURE-----
Version: 2.6.3ia
iQCVAwUBOYl4TtiyeT6k//vtAQEaNAP/SVzXNgOuru9874hk5rmtM7HpPKHB+VI0
9yN7Wv1UsXtXKvo6Bkhc/PX37HG8Qc7ZA19jfTEQpxC+JryTNko4EncJqamjtR81
PcqgiYGVao4jaGQg0QM2gHEQkLXzFwfj+bPFO2c++ZLFQuBw/xAixM4bMpsvPINn
aDdZCDthWd4=
=ACqM
-----END PGP SIGNATURE-----
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20000803154902.A470>