Date: 9 Aug 2001 22:37:58 +0200 From: elmar@devsoft.com To: FreeBSD-gnats-submit@freebsd.org Subject: kern/29582: usb0: host controller halted Message-ID: <20010809223758.A54500@devsoft.devsoft.com>
next in thread | raw e-mail | index | archive | help
>Number: 29582 >Category: kern >Synopsis: during boot the console shows: usb0: host controller halted >Confidential: no >Severity: serious >Priority: medium >Responsible: freebsd-bugs >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Thu Aug 09 13:40:26 PDT 2001 >Closed-Date: >Last-Modified: >Originator: Elmar Bartel >Release: FreeBSD 4.3-STABLE i386 >Organization: /dev Software GmbH >Environment: System: FreeBSD pegasus.devsoft.com 4.3-STABLE FreeBSD 4.3-STABLE #0: Thu Aug 9 20:12:35 CEST 2001 elmar@pegasus.devsoft.com:/usr/obj/.amd_mnt/boheme/host/usr/src/sys/PEGASUS i386 >Description: I installed FreeBSD 4.3-RELEASE on my laptop. During the installation and also during reboot the kernel always states: usb0: host controller halted (after it correctly discovered the usb hub controller. I obtained 4.3-STABLE in hope to remedy the problem, but failed. The USB-port had a USB-port bar connnected, that shows that usb is somewhat working - but fails later on some reason. The following is the config file and dmesg output. #---------------------------------------------------------------------- # # GENERIC -- Generic kernel configuration file for FreeBSD/i386 # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ./LINT configuration file. If you are # in doubt as to the purpose or necessity of a line, check first in LINT. # # $FreeBSD: src/sys/i386/conf/GENERIC,v 1.246.2.24 2001/04/05 17:23:10 sos Exp $ machine i386 cpu I386_CPU cpu I486_CPU cpu I586_CPU cpu I686_CPU ident PEGASUS maxusers 32 #makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options INET6 #IPv6 communications protocols options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options SOFTUPDATES #Enable FFS soft updates support options MFS #Memory Filesystem options MD_ROOT #MD is a potential root device options NFS #Network Filesystem options NFS_ROOT #NFS usable as root device, NFS required options MSDOSFS #MSDOS Filesystem options CD9660 #ISO 9660 Filesystem options CD9660_ROOT #CD-ROM usable as root, CD9660 required options PROCFS #Process filesystem options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI options UCONSOLE #Allow users to grab the console options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options KTRACE #ktrace(1) support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores options P1003_1B #Posix P1003_1B real-time extensions options _KPOSIX_PRIORITY_SCHEDULING options ICMP_BANDLIM #Rate limit bad replies options KBD_INSTALL_CDEV # install a CDEV entry in /dev # To make an SMP kernel, the next two are needed #options SMP # Symmetric MultiProcessor Kernel #options APIC_IO # Symmetric (APIC) I/O device isa device eisa device pci # Floppy drives device fdc0 at isa? port IO_FD1 irq 6 drq 2 device fd0 at fdc0 drive 0 device fd1 at fdc0 drive 1 # ATA and ATAPI devices device ata0 at isa? port IO_WD1 irq 14 device ata1 at isa? port IO_WD2 irq 15 device ata device atadisk # ATA disk drives device atapicd # ATAPI CDROM drives device atapifd # ATAPI floppy drives device atapist # ATAPI tape drives options ATA_STATIC_ID #Static device numbering ## SCSI Controllers #device ahb # EISA AHA1742 family #device ahc # AHA2940 and onboard AIC7xxx devices #device amd # AMD 53C974 (Tekram DC-390(T)) #device isp # Qlogic family #device ncr # NCR/Symbios Logic #device sym # NCR/Symbios Logic (newer chipsets) #options SYM_SETUP_LP_PROBE_MAP=0x40 # Allow ncr to attach legacy NCR devices when # both sym and ncr are configured #device adv0 at isa? #device adw #device bt0 at isa? #device aha0 at isa? #device aic0 at isa? #device ncv # NCR 53C500 #device nsp # Workbit Ninja SCSI-3 #device stg # TMC 18C30/18C50 # SCSI peripherals device scbus # SCSI bus (required) device da # Direct Access (disks) device sa # Sequential Access (tape etc) device cd # CD device pass # Passthrough device (direct SCSI access) # RAID controllers interfaced to the SCSI subsystem #device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID #device dpt # DPT Smartcache - See LINT for options! #device mly # Mylex AcceleRAID/eXtremeRAID # RAID controllers #device aac # Adaptec FSA RAID, Dell PERC2/PERC3 #device ida # Compaq Smart RAID #device amr # AMI MegaRAID #device mlx # Mylex DAC960 family #device twe # 3ware Escalade # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc0 at isa? port IO_KBD device atkbd0 at atkbdc? irq 1 flags 0x1 device psm0 at atkbdc? irq 12 device vga0 at isa? # splash screen/screen saver pseudo-device splash # syscons is the default console driver, resembling an SCO console device sc0 at isa? flags 0x100 # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? #options XSERVER # support for X server on a vt console #options FAT_CURSOR # start with block cursor # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines #options PCVT_SCANSET=2 # IBM keyboards are non-std # Floating point support - do not disable. device npx0 at nexus? port IO_NPX irq 13 # Power management support (see LINT for more options) #device apm0 at nexus? disable flags 0x20 # Advanced Power Management #options POWERFAIL_NMI # make it beep instead of panicing # PCCARD (PCMCIA) support device card device pcic0 at isa? irq 0 port 0x3e0 iomem 0xd0000 device pcic1 at isa? irq 0 port 0x3e2 iomem 0xd4000 disable # Serial (COM) ports device sio0 at isa? disable port IO_COM1 flags 0x10 irq 4 device sio1 at isa? disable port IO_COM2 irq 3 device sio2 at isa? disable port IO_COM3 irq 5 device sio3 at isa? disable port IO_COM4 irq 9 ## Parallel port #device ppc0 at isa? irq 7 #device ppbus # Parallel port bus (required) #device lpt # Printer #device plip # TCP/IP over parallel #device ppi # Parallel port interface device ##device vpo # Requires scbus and da # PCI Ethernet NICs. device de # DEC/Intel DC21x4x (``Tulip'') device fxp # Intel EtherExpress PRO/100B (82557, 82558) device tx # SMC 9432TX (83c170 ``EPIC'') device vx # 3Com 3c590, 3c595 (``Vortex'') device wx # Intel Gigabit Ethernet Card (``Wiseman'') # PCI Ethernet NICs that use the common MII bus controller code. # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! device miibus # MII bus support device dc # DEC/Intel 21143 and various workalikes device pcn # AMD Am79C79x PCI 10/100 NICs device rl # RealTek 8129/8139 device sf # Adaptec AIC-6915 (``Starfire'') device sis # Silicon Integrated Systems SiS 900/SiS 7016 device ste # Sundance ST201 (D-Link DFE-550TX) device tl # Texas Instruments ThunderLAN device vr # VIA Rhine, Rhine II device wb # Winbond W89C840F device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') # ISA Ethernet NICs. device ed0 at isa? port 0x280 irq 10 iomem 0xd8000 device ex device ep device fe0 at isa? port 0x300 # Xircom Ethernet device xe # PRISM I IEEE 802.11b wireless NIC. device awi # WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really # exists only as a PCMCIA device, so there is no ISA attachment needed # and resources will always be dynamically assigned by the pccard code. device wi # Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will # work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP # mode (the factory default). If you set the switches on your ISA # card for a manually chosen I/O address and IRQ, you must specify # those parameters here. device an # The probe order of these is presently determined by i386/isa/isa_compat.c. device ie0 at isa? port 0x300 irq 10 iomem 0xd0000 #device le0 at isa? port 0x300 irq 5 iomem 0xd0000 device lnc0 at isa? port 0x280 irq 10 drq 0 device cs0 at isa? port 0x300 device sn0 at isa? port 0x300 irq 10 # Pseudo devices - the number indicates how many units to allocate. pseudo-device loop # Network loopback pseudo-device ether # Ethernet support pseudo-device sl 1 # Kernel SLIP pseudo-device ppp 1 # Kernel PPP pseudo-device tun # Packet tunnel. pseudo-device pty # Pseudo-ttys (telnet etc) pseudo-device md # Memory "disks" pseudo-device gif 4 # IPv6 and IPv4 tunneling pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation) # The `bpf' pseudo-device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! pseudo-device bpf #Berkeley packet filter # USB support device uhci # UHCI PCI->USB interface device ohci # OHCI PCI->USB interface device usb # USB Bus (required) device ugen # Generic device uhid # "Human Interface Devices" device ukbd # Keyboard device ulpt # Printer # umass IOMEGA ZIP 100 driver device umass # Disks/Mass storage - Requires scbus and da device ums # Mouse #device uscanner # Scanners # USB Ethernet, requires mii #device aue # ADMtek USB ethernet #device cue # CATC USB ethernet #device kue # Kawasaki LSI USB ethernet device pcm options CAMDEBUG options UHCI_DEBUG options OHCI_DEBUG options USB_DEBUG options UMASS_DEBUG #---------------------------------------------------------------------- Here is the dmesg output after boot: #---------------------------------------------------------------------- Copyright (c) 1992-2001 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.3-STABLE #0: Thu Aug 9 20:12:35 CEST 2001 elmar@pegasus.devsoft.com:/usr/obj/.amd_mnt/boheme/host/usr/src/sys/PEGASUS Timecounter "i8254" frequency 1193182 Hz CPU: Pentium III/Pentium III Xeon/Celeron (696.58-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x683 Stepping = 3 Features=0x387f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE> real memory = 134152192 (131008K bytes) avail memory = 126455808 (123492K bytes) Preloaded elf kernel "kernel" at 0xc0415000. Pentium Pro MTRR support enabled md0: Malloc disk npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pci0: <unknown card> (vendor=0x0000, dev=0x0000) at 0.1 pci0: <unknown card> (vendor=0x8086, dev=0x7196) at 0.2 irq 11 pci0: <Trident model 9525 VGA-compatible display device> at 2.0 irq 5 pcic-pci0: <TI PCI-1410 PCI-CardBus Bridge> at device 3.0 on pci0 pcic-pci0: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][FUNC pci int + CSC serial isa irq] pci0: <unknown card> (vendor=0x125d, dev=0x1988) at 6.0 irq 11 isab0: <PCI to ISA bridge (vendor=8086 device=7198)> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> port 0x1ca0-0x1caf at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 uhci0: <Intel 82443MX USB controller> port 0x1c80-0x1c9f irq 11 at device 7.2 on pci0 uhci_run: setting run=0 uhci_run: done cmd=0x0 sts=0x20 uhci_run: setting run=1 uhci_run: done cmd=0x81 sts=0x0 usb0: <Intel 82443MX USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhub1: Philips Semiconductors product 0x1122, class 9/0, rev 1.10/1.10, addr 2 uhub1: 4 ports with 4 removable, self powered uhub2: Philips Semiconductors product 0x1122, class 9/0, rev 1.10/1.10, addr 3 uhub2: 3 ports with 3 removable, bus powered uhci_waitintr: timeout usbd_transfer_cb: short transfer 0<8 uhub3: AMI AMI USBHub , class 9/0, rev 1.00/1.50, addr 4 uhub3: 3 ports with 0 removable, self powered ukbd0: AMI AMI USB HID , rev 1.00/1.50, addr 5, iclass 3/1 kbd1 at ukbd0 ums0: AMI AMI USB HID , rev 1.00/1.50, addr 5, iclass 3/1 ums0: 5 buttons and Z dir. uhid0: AMI AMI USB HID , rev 1.00/1.50, addr 5, iclass 3/0 ugen0: AMI AMI USBSerPar , rev 1.00/1.50, addr 6 chip1: <PCI to Other bridge (vendor=8086 device=719b)> at device 7.3 on pci0 dc0: <ADMtek AN985 10/100BaseTX> port 0x1800-0x18ff mem 0xfec20000-0xfec203ff irq 5 at device 9.0 on pci0 dc0: Ethernet address: 00:20:18:d6:6d:1b miibus0: <MII bus> on dc0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fdc0: direction bit not set fdc0: cmd 3 failed at out byte 1 of 3 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> pcic0: <VLSI 82C146> at port 0x3e0 iomem 0xd0000 on isa0 pcic0: Polling mode pccard0: <PC Card bus -- kludge version> on pcic0 pccard1: <PC Card bus -- kludge version> on pcic0 usb0: host controller halted ad0: 9590MB <FUJITSU MHM2100AT> [19485/16/63] at ata0-master UDMA33 Mounting root from ufs:/dev/ad0s2a uhci_timeout: ii=0xc0b293c0 uhub1: at uhub0 port 2 (addr 2) disconnected ukbd0: detached ums0: detached uhid0: detached ugen0: detached uhci_timeout: ii=0xc0b29440 uhci_timeout: ii=0xc0b293c0 uhci_timeout: ii=0xc0b293c0 uhci_timeout: ii=0xc0b29360 uhci_timeout: ii=0xc0b29360 uhub3: detached uhci_timeout: ii=0xc0b294c0 uhci_timeout: ii=0xc0b29440 uhci_timeout: ii=0xc0b29440 uhub2: detached uhub1: detached uhci_timeout: ii=0xc0b29540 uhci_timeout: ii=0xc0b29540 uhci_timeout: ii=0xc0b29540 usbd_new_device: addr=2, getting first desc failed uhub0: device problem, disabling port 2 #---------------------------------------------------------------------- >How-To-Repeat: simply on each reboot. >Fix: Not known. >Release-Note: >Audit-Trail: >Unformatted: To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010809223758.A54500>