Date: Mon, 8 Feb 2010 16:59:05 -0500 From: Danny Edge <nocmonkey@gmail.com> To: FreeBSD Questions <questions@freebsd.org> Subject: Problem building GCC - Postfix install from ports failed Message-ID: <addc34c61002081359m7117ed69m51fa23cc049e732@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
I was advised to try this again. New install FreeBSD 7.2 R, installing
Postfix from cd /usr/ports/mail/postfix && make install clean
I receive the following error near the end of the install:
checking whether -fkeep-inline-functions is supported... yes
updating cache ./config.cache
creating ./config.status
creating Makefile
===> Building for gcc-4.2.5_20090325
cd ./..//gcc-4.2-20090325 && autogen Makefile.def
autogen: not found
gmake: *** [..//gcc-4.2-20090325/Makefile.in] Error 127
*** Error code 1
Stop in /usr/ports/lang/gcc42.
*** Error code 1
Stop in /usr/ports/mail/addresses.
*** Error code 1
Stop in /usr/ports/mail.
mx#
Here is my dmesg output:
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.2-RELEASE-p4 #0: Fri Oct 2 12:21:39 UTC 2009
root@i386-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Sempron(tm) 2400+ (1666.49-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x681 Stepping = 1
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0480800<SYSCALL,MP,MMX+,3DNow!+,3DNow!>
real memory = 536084480 (511 MB)
avail memory = 510578688 (486 MB)
ACPI APIC Table: <A M I OEMAPIC >
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 0.3> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <A M I OEMRSDT> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 1ff00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA KT880 host to PCI bridge> on hostb0
agp0: aperture size is 128M
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xd000-0xd0ff mem
0xb0000000-0xb7ffffff,0xfe200000-0xfe20ffff irq 16 at device 0.0 on
pci1
vgapci1: <VGA-compatible display> mem
0xa8000000-0xafffffff,0xfe000000-0xfe00ffff at device 0.1 on pci1
skc0: <Marvell Gigabit Ethernet> port 0xe400-0xe4ff mem
0xfe900000-0xfe903fff irq 18 at device 9.0 on pci0
skc0: Marvell Yukon Lite Gigabit Ethernet rev. A3(0x7)
sk0: <Marvell Semiconductor, Inc. Yukon> on skc0
sk0: Ethernet address: 00:11:2f:b9:91:f2
miibus0: <MII bus> on sk0
e1000phy0: <Marvell 88E1011 Gigabit PHY> PHY 0 on miibus0
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
skc0: [ITHREAD]
atapci0: <VIA 6420 SATA150 controller> port
0xeff0-0xeff7,0xefe4-0xefe7,0xefa8-0xefaf,0xefe0-0xefe3,0xef90-0xef9f,0xe800-0xe8ff
irq 20 at device 15.0 on pci0
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
atapci1: <VIA 8237 UDMA133 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 15.1 on
pci0
ata0: <ATA channel 0> on atapci1
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci1
ata1: [ITHREAD]
uhci0: <VIA 83C572 USB controller> port 0xeec0-0xeedf irq 21 at device
16.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xef00-0xef1f irq 21 at device
16.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xef20-0xef3f irq 21 at device
16.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: <VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
uhci3: <VIA 83C572 USB controller> port 0xef40-0xef5f irq 21 at device
16.3 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb3: <VIA 83C572 USB controller> on uhci3
usb3: USB revision 1.0
uhub3: <VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xfea00000-0xfea000ff irq
21 at device 16.4 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <VIA VT6202 USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: <VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
uhub4: 8 ports with 8 removable, self powered
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq
2 on acpi0
fdc0: [FILTER]
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
cpu0: <ACPI CPU> on acpi0
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xccfff pnpid ORM0000 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1666490696 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 39266MB <IC35L040AVER07 0 ER4OA46A> at ata0-master UDMA100
ad1: 114473MB <WDC WD1200JB-00EVA0 15.05R15> at ata0-slave UDMA100
acd0: DVDR <NEC DVD RW ND-3520A/1.04> at ata1-master UDMA33
ad4: 152627MB <Seagate ST3160827AS 3.42> at ata2-master SATA150
GEOM_LABEL: Label for provider ad0s5 is ntfs/IBM_40GB_DATA.
GEOM_LABEL: Label for provider ad1s1 is ntfs/WD_DATA.
GEOM_LABEL: Label for provider ad1s5 is ntfs/WD_DATA#1.
GEOM_LABEL: Label for provider ad1s6 is ntfs/WD_DATA#2.
GEOM_LABEL: Label for provider ad4s1a is ufsid/3c3289b6df852df3.
GEOM_LABEL: Label for provider ad4s1d is ufsid/3c3289bc49b5d5b3.
GEOM_LABEL: Label for provider ad4s1e is ufsid/3c3289b6ff6278dc.
GEOM_LABEL: Label for provider ad4s1f is ufsid/3c3289b62b6f81cb.
Trying to mount root from ufs:/dev/ad4s1a
WARNING: / was not properly dismounted
GEOM_LABEL: Label ufsid/3c3289b6df852df3 removed.
GEOM_LABEL: Label for provider ad4s1a is ufsid/3c3289b6df852df3.
GEOM_LABEL: Label ufsid/3c3289b6df852df3 removed.
GEOM_LABEL: Label ufsid/3c3289b6ff6278dc removed.
WARNING: /tmp was not properly dismounted
GEOM_LABEL: Label ufsid/3c3289b62b6f81cb removed.
WARNING: /usr was not properly dismounted
GEOM_LABEL: Label ufsid/3c3289bc49b5d5b3 removed.
WARNING: /var was not properly dismounted
/var: mount pending error: blocks 16 files 6
sk0: link state changed to UP
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...1 1 0 0 done
All buffers synced.
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.2-RELEASE-p4 #0: Fri Oct 2 12:21:39 UTC 2009
root@i386-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Sempron(tm) 2400+ (1666.49-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x681 Stepping = 1
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0480800<SYSCALL,MP,MMX+,3DNow!+,3DNow!>
real memory = 536084480 (511 MB)
avail memory = 510578688 (486 MB)
ACPI APIC Table: <A M I OEMAPIC >
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 0.3> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <A M I OEMRSDT> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 1ff00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA KT880 host to PCI bridge> on hostb0
--
CPDE - Certified Petroleum Distribution Engineer
CCBC - Certified Canadian Beer Consumer
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?addc34c61002081359m7117ed69m51fa23cc049e732>