Date: Thu, 6 Feb 1997 11:52:11 -0800 (PST) From: Doug White <dwhite@gdi.uoregon.edu> To: "Kevin T. Likes" <klikes@isd.state.in.us> Cc: freebsd-questions@freebsd.org Subject: Re: NEC 282 ATAPI cd-rom problem Message-ID: <Pine.BSI.3.94.970206115034.829W-100000@localhost> In-Reply-To: <97Feb6.135425est.53786@mailgate.isd.state.in.us>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, 6 Feb 1997, Kevin T. Likes wrote: > I'm running 2.1.5-RELEASE on a pentium 133 with a PCI and an ISA > bus, and an IDE contoller. I also have what is identified on bootup > as an ATAPI device NEC CDROM:282. > > I rebuilt the kernel with the following options: > > options ATAPI #Enable ATAPI support for IDE bus > device wcd0 #IDE CD-ROM > > Running nm on the kernel shows a number of what appear to be functions > to access wcd0, but when I try to mount I get the following error: > > bash# mount /dev/wcd0c /mnt > /dev/wcd0c on /mnt: Device not configured > > dmesg shows the system doesn't seem to be even scanning for the device > at all. What steps am I missing? If the wdc probe doesn't find it during startup, then it won't be configured. Try moving it to the slave position on the primary IDE controller. Doug White | University of Oregon Internet: dwhite@resnet.uoregon.edu | Residence Networking Assistant http://gladstone.uoregon.edu/~dwhite | Computer Science Major
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSI.3.94.970206115034.829W-100000>