Date: Wed, 26 Jan 2000 22:23:12 +0000 From: Alex <ak@freenet.co.uk> To: Soren Schmidt <sos@freebsd.dk> Cc: current@FreeBSD.ORG Subject: Re: My ATAPI CD not come ready Message-ID: <388F73D0.80AD5C39@freenet.co.uk> References: <200001260731.IAA90753@freebsd.dk>
next in thread | previous in thread | raw e-mail | index | archive | help
Soren Schmidt wrote: > > It seems Alex wrote: > > > You need to update.. > > > > > > OK - I've just updated. Here goes again: > > > > ata1-slave: ata_command: timeout waiting for intr > > ata1-slave: identify failed > > ad0: 6194MB <TOSHIBA MK6409MAV> [13424/15/63] at ata0-master using > > UDMA33 > > acd0: CDROM <UJDA150> at ata1-master using PIO4 > > Mounting root from ufs:/dev/ad0s2a > > > I wouldn't be surprised if ATAPI_CMD_IDENTIFY failed on ata1-master, but > > why does it say ata1-slave? It's a notebook PC, so unfortunately I'm > > not sure how it's all connected. > > Apparently it thinks something is there, could you mail me a complete > verbose bootlog (dmesg) please, and I'll try to figure out what is > going wrong.. OK - here's the part relevant to ata: ata-pci0: <Intel PIIX4 ATA-33 controller> port 0xfcf0-0xfcff at device 1.1 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xfcf0 ata0: mask=03 status0=50 status1=00 ata0: mask=03 status0=50 status1=00 ata0: devices = 0x1 ata0 at 0x01f0 irq 14 on ata-pci0 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xfcf8 ata1: mask=03 status0=00 status1=00 ata1: mask=03 status0=00 status1=00 ata1: devices = 0xc ata1 at 0x0170 irq 15 on ata-pci0 ... (delay) ata1-slave: ata_command: timeout waiting for intr ata1-slave: identify failed ata0-master: success setting up UDMA2 mode on PIIX4 chip ad0: <TOSHIBA MK6409MAV/F5.01 A> ATA-4 disk at ata0 as master ad0: 6194MB (12685680 sectors), 13424 cyls, 15 heads, 63 S/T, 512 B/S ad0: 16 secs/int, 1 depth queue, UDMA33 ad0: piomode=4 dmamode=2 udmamode=2 cblid=0 Creating DISK ad0 Creating DISK wd0 ata1-master: piomode=4 dmamode=2 udmamode=-1 dmaflag=1 ata1-master: success setting up PIO4 mode on generic chip acd0: <UJDA150/1.02> CDROM drive at ata1 as master acd0: read 4134KB/s (4134KB/s), 128KB buffer, PIO4 acd0: Reads: CD-R, CD-RW, CD-DA acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray acd0: Medium: CD-ROM 120mm photo disc loaded, unlocked Mounting root from ufs:/dev/ad0s2a ad0s1: type 0xb, start 63, end = 5322239, size 5322177 : OK ad0s2: type 0xa5, start 5322240, end = 12685679, size 7363440 : OK Any ideas? Alex To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?388F73D0.80AD5C39>