Date: Thu, 11 Nov 2010 14:12:13 +0100 From: Uffe Jakobsen <uffe@uffe.org> To: freebsd-mobile@freebsd.org Subject: Re: Acer Travelmate 8371 bricked by installing FreeBSD? Message-ID: <4CDBEBAD.7080505@uffe.org> In-Reply-To: <20101111132141.49592qovwxlndt4w@webmail.df.eu> References: <20101111132141.49592qovwxlndt4w@webmail.df.eu>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi Marcus, On 11/11/10 13.21, Markus Hoenicka wrote: > I was bold enough to use the > entire hard drive as the FreeBSD slice. This may be important as this > may have removed any magic that Acer had put onto this drive (there > were a bunch of partitions and non-assigned areas, only two of them > NTFS partitions). I've had similar considerations - but later it was revealed that it was of no relevance for the problem... > In any case, when I attempted to reboot into the > installed FreeBSD, the box no longer made it past the initial Acer > splash screen. Neither F2 (edit BIOS settings) nor F12 (boot device > menu) are responsive, only Ctl+Alt+Del and the power switch do have > any effect. > > This left me with a brick, as none of the remedies that Google > suggested (things like take out battery, unplug power cord, press > mains switch for 30 sec, reattach power cord and boot) would get this > box past the initial splash screen. > likewise here - the system appeared to hang in the bios... > > Did anyone run into similar problems before? Is there any possibility > that the box was indeed bricked by installing FreeBSD, or did I > experience a bad hair day? > As we've discussed before I'm using an Acer Aspire 1410 (11.6") with FreeBSD 8.1. During initial installation I've expierienced something similar with my Acer system... My guess is that if you remove/unplug your HDD - it will not hang anymore... The workaround for me was to remove the disk - go into the bios - and configure the sata emulation from ahci mode to ide "legacy/compatible" mode - or whatever they called it in the bios (I've no access to the notebook right now) After that you can put back the HDD and boot again - and it should work. I'd almost forgot about this problem since it is 6 months ago. My suspicion at that time was around the FBSD BootManager that I have installed - but I never got around to isolate (and report) the problem... Question: did you install the FBSD BootManager or just a std MBR ? I hope it helps. Kind regards Uffe Jakobsen :-)
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4CDBEBAD.7080505>