Date: Thu, 4 Mar 1999 15:52:41 -0500 (EST) From: tom@tomqnx.com (Tom Torrance at home) To: current@freebsd.org Cc: tom@tomqnx.com Subject: 3COM 3c509 (ep driver) Message-ID: <m10If6n-000I5qC@TomQNX.tomqnx.com>
next in thread | raw e-mail | index | archive | help
--ELM920580761-851-0_
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit
According to the dmesg output attached, there is a problem
with this driver. In practise, it does seem to work.
This is a test kernel compiled for me by Matt Jacob.
Cheers,
Tom
--ELM920580761-851-0_
Content-Type: text/plain; charset=ISO-8859-1
Content-Disposition: attachment; filename=dmesg
Content-Description: dmesg
Content-Transfer-Encoding: 7bit
Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-CURRENT #0: Tue Mar 2 09:16:31 PST 1999
mjacob@quarm.feral.com:/usr/src/sys/compile/DARKSTAR
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 200455564 Hz
CPU: Pentium/P55C (200.46-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x544 Stepping=4
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory = 67108864 (65536K bytes)
avail memory = 62701568 (61232K bytes)
Probing for devices on PCI bus 0:
chip0: <Intel 82439TX System Controller (MTXC)> rev 0x01 on pci0.0.0
chip1: <Intel 82371AB PCI to ISA bridge> rev 0x01 on pci0.1.0
ide_pci0: <Intel PIIX4 Bus-master IDE controller> rev 0x01 on pci0.1.1
chip2: <Intel 82371AB Power management controller> rev 0x01 on pci0.1.3
ncr0: <ncr 53c875 fast20 wide scsi> rev 0x03 int a irq 9 on pci0.10.0
vga0: <S3 ViRGE DX/GX graphics accelerator> rev 0x01 int a irq 11 on pci0.11.0
Probing for PnP devices:
CSN 1 Vendor ID: CTL00c1 [0xc1008c0e] Serial 0x1641e094 Comp ID: PNPb02f [0x2fb0d041]
pcm1 (SB16pnp <SB16 PnP> sn 0x1641e094) at 0x220-0x22f irq 10 drq 3 flags 0x15 on isa
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=0x0>
pcm0 not probed due to drq conflict with pcm1 at 3
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
ppc0 at 0x378 irq 7 on isa
ppc0: W83877AF chipset (NIBBLE-only) in COMPATIBLE mode
ppb0: IEEE1284 device found /NIBBLE
Probing for PnP devices on ppbus0:
ppbus0: <Canon BJC-4300/1.00> PRINTER BJ,LQ,BJL,BJRaster,BSCC
plip0: <PLIP network interface> on ppbus 0
ppi0: <generic parallel i/o> on ppbus 0
lppps0: <Pulse per second Timing Interface> on ppbus 0
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
psm0 irq 12 on isa
psm0: model Generic PS/2 mouse, device ID 0
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 flags 0x80ff80ff on isa
wdc0: unit 0 (wd0): <QUANTUM FIREBALL ST4.3A>, 32-bit, multi-block-16
wd0: 4110MB (8418816 sectors), 14848 cyls, 9 heads, 63 S/T, 512 B/S
wdc1 at 0x170-0x177 irq 15 flags 0x80ff80ff on isa
wdc1: unit 0 (atapi): <TOSHIBA CD-ROM XM-5302TA/1095>, removable, intr, iordy
acd0: drive speed 689KB/sec, 256KB cache
acd0: supported read types: CD-DA
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: no/blank disc inside, unlocked
1 3C5x9 board(s) on ISA found at 0x210
ep0 at 0x210-0x21f irq 5 on isa
ep0: aui/bnc[*BNC*] address 00:60:8c:62:a5:65
npx0 on motherboard
npx0: INT 16 interface
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
Intel Pentium detected, installing workaround for F00F bug
ep0 XXX: driver didn't set ifq_maxlen
Waiting 15 seconds for SCSI devices to settle
sa0 at ncr0 bus 0 target 6 lun 0
sa0: <HP T4000s 1.10> Removable Sequential Access SCSI-2 device
sa0: 3.300MB/s transfers
da0 at ncr0 bus 0 target 0 lun 0
da0: <SEAGATE ST34555N 0930> Fixed Direct Access SCSI-2 device
da0: 20.000MB/s transfers (20.000MHz, offset 15), Tagged Queueing Enabled
da0: 4340MB (8888924 512 byte sectors: 255H 63S/T 553C)
changing root device to da0s2a
cd0 at ncr0 bus 0 target 5 lun 0
cd0: <HP CD-Writer 6020 1.07> Removable CD-ROM SCSI-2 device
cd0: 3.300MB/s transfers
cd0: cd present [253970 x 2048 byte records]
WARNING: / was not properly dismounted
--ELM920580761-851-0_--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?m10If6n-000I5qC>