Date: Tue, 18 Apr 2017 13:54:46 -0300 From: =?UTF-8?B?T3RhY8OtbGlv?= <otacilio.neto@bsd.com.br> To: freebsd-arm@freebsd.org Subject: Re: beaglebone black: MMC partition switch failed Message-ID: <e3db0f4b-ff4c-0c23-3fac-933d953d6f9c@bsd.com.br> In-Reply-To: <20170418155102.GO2455@FreeBSD.org> References: <5bac0dbc-6d2b-c757-0cd3-babbd048cfd2@gmail.com> <CAKE2PDubyQx2VtOJQt=2NTYVDgfUzxi1UO5RDhJ_M0xVe2nZRg@mail.gmail.com> <20170418155102.GO2455@FreeBSD.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Em 18/04/2017 12:51, Glen Barber escreveu: > On Tue, Apr 18, 2017 at 08:42:58AM -0700, jungle Boogie wrote: >> On 15 April 2017 at 18:50, jungle boogie <jungleboogie0@gmail.com> wrote: >>> Hi All, >>> >>> It's been awhile since I've been able to run FreeBSD on my BBB. It was >>> failing somewhere, but I didn't have good serial cable to see what was >>> happening. >>> >>> Using the latest freebsd head image: >>> FreeBSD-12.0-CURRENT-arm-armv6-BEAGLEBONE-20170413-r316750.img >>> >>> I'm writing it to my microSD card: >>> sudo dd if=FreeBSD-12.0-CURRENT-arm-armv6-BEAGLEBONE-20170413-r316750.img >>> of=/dev/sdf bs=8M >>> 128+0 records in >>> 128+0 records out >>> 1073741824 bytes (1.1 GB, 1.0 GiB) copied, 1.01005 s, 1.1 GB/s >>> >>> >>> Putting it in the BB and holding s2 for three seconds as mentioned in the >>> FBSD Journal article[0]. >>> >>> Upon doing so, I see this: >>> U-Boot SPL 2017.01-rc3 (Apr 13 2017 - 12:30:59) >>> Trying to boot from MMC1** First descriptor is NOT a primary desc on 0:1 ** >>> MMC partition switch failed >>> *** Warning - MMC partition switch failed, using default environment >>> >>> ** Partition 1 not valid on device 0 ** >>> spl_register_fat_device: fat register err - -1 >>> spl_load_image_fat: error reading image u-boot.img, err - -1 >>> MMC partition switch failed >>> *** Warning - MMC partition switch failed, using default environment >>> >>> spl: no partition table found >>> SPL: failed to boot from all boot devices >>> ### ERROR ### Please RESET the board ### >>> >> >> Anyone have recommendations on how to fix this? > There appears to be an issue with the 20170413 image. Please check if > the FreeBSD-12.0-CURRENT-arm-armv6-BEAGLEBONE-20170405-r316508.img.xz > image works. > > Glen > I tested them a few days ago and none of them worked. I also compiled locally and it does not work, even an image generated for the RPI3 prints the same error message.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?e3db0f4b-ff4c-0c23-3fac-933d953d6f9c>